HEWLETT-PACKARD Probook 4530S - Answered Questions & Fixed issues

There are no master password generators for ProBooks or EliteBooks. You will need to contact HP. http://www8.hp.com/us/en/contact-hp/ww-contact-us.html?jumpid=reg_r1002_usen_c-001_title_r0003 Or look at this link. http://forums.mydigitallife.info/threads/49497-HP-Probook-Elitebook-BIOS-Password-Reset-Utility Or replace the BIOS chip. http://www.ebay.com/itm/HP-Probook-4310s-4410s-4510s-4710s-6440b-6445b-6540b-6545b-Bios-Chip-No-Pass...

Problem with ROM file size

Check the battery condition.It may be dried of..

what a waste of space....

Change your battery,or dry this battery for a week or two then test it,might work.

If wireless, replace the batteries. If wired then make sure it is not on a reflective surface and try connecting it to a different USB port. Otherwise mouse could be dead.

you have to have the existing password first. enter it to unlock, then enter blank spaces to reset to blacnk, or to disable it after it has been cleared.

It is not possible to recover the BIOS password, if you remove the CMOS battery the password is wiped, but this requires that you open and possibly disassemble your laptop which requires a certain level of skill so you don't break anything.

The RAM is not connected properly or it may have become damaged you know it is useless to power up a battery powered computer without RAM so it blinks twice to tell you the situation then stays off. try replacing the RAM with a new one

Hi, I think you should go directly to the website here http://www8.hp.com/us/en/drivers.html find your product and download the right driver for it.

i think your sata/ide cable is not connected with motherboard.. try to connect properly and restart your system

have u installed the wireless drivers ?

see my previous post to your question.

Try to clear any debris, use a little bit of silicone spray to free up the button, if that fails remove the cover and check the switch that's under the button. Sometimes the plastic button will break , wear out , that activates the switch underneath and doesn't "spring" back when pushed in, not resetting.

Use the security question

Install the Bluetooth driver. You can download the device drivers from the Compaq/HP WEB support/download page. Make sure you select your model laptop and the Windows drivers you require and install them. Click on this link to download the drivers: - http://welcome.hp.com/country/au/en/cs/support.html

In what? The HP provided software? Have you tried settings in the software you are trying to use? Is the webcam listed in Device Manager? Have you done ALL your Windows and HP updates? This may help , if it's a driver issue: http://h20000.www2.hp.com/bizsupport/TechSupport/ProductList.jsp?locale=en_us&taskId=135&prodSeriesId=5060880&prodTypeId=321957

Pull the plug, remove the battery, plug in, reboot.

Someone set a policy on your machine to enforce certain rules about passwords. Best to ask this person to modify these rules for you. Alternatively you can run gpedit.msc, then follow this path to change them yourself: Local Computer Policy / Computer Configuration / Windows Settings / Security Settings / Account Policy / Password Policy. Note also this: - You cannot delete the inbuilt Administrator account. - Having administrator accounts with a blank password is a big security risk.Answer from: http://answers.microsoft.com/en-us/windows/forum/windows_7-security/error-message-windows-cannot-remove-the-password/3eb2c867-e6fb-4216-9040-4e9913a29c30

Try HP support for info: http://h20000.www2.hp.com/bizsupport/TechSupport/ProductList.jsp?lang=en&cc=us&taskId=135&prodTypeId=321957&prodSeriesId=5060880