20 Most Recent
Kyocera FSC2126MFP AllInOne Laser Printer - Page 9 Questions & Answers
I have a kyocera ecosys m2540dn printer and i get the screen message "replace toner"!
The error message "replace toner" indicates that the printer's toner cartridge needs to be replaced. However, since you mentioned that you already replaced it with a new one, there may be a few reasons why the error message is still appearing:
- The toner cartridge may be defective. Even though it is new, it may have a defect that is preventing it from being recognized by the printer. Try replacing it with a different toner cartridge.
- The toner cartridge may not be compatible with your printer. If you are using a non-genuine toner cartridge, it may not be compatible with your printer. Try using a genuine Kyocera toner cartridge.
- The toner sensor or other hardware may be malfunctioning. In some cases, the error message may be caused by a malfunctioning toner sensor or other hardware issue. In this case, you may need to contact a Kyocera service technician for further assistance.
I hope this helps!
Kyocera KM-C2525E Yellow cartridge will not load. Message please replace cartridge
Here are some steps I feel you can take to resolve the issue with your Kyocera KM-C2525E yellow cartridge:
Check the cartridge chip - The yellow cartridge has a small chip on it that communicates with the printer. If the chip is damaged or dirty, it can prevent the cartridge from being recognized by the printer. Try cleaning the chip with a soft, dry cloth and reinserting the cartridge.
Check the cartridge contacts on the printer - The printer also has contacts where the cartridge is inserted. If these contacts are dirty or damaged, it can prevent the cartridge from being recognized. Try cleaning the contacts with a soft, dry cloth.
Perform a drum refresh - The drum in the printer can sometimes become coated with toner, which can prevent the cartridge from making proper contact with the printer. Try performing a drum refresh from the printer's control panel to clean the drum.
Reset the printer - Sometimes resetting the printer can clear any issues with the cartridge recognition. Try turning off the printer, unplugging it from the power source, and waiting a few minutes before plugging it back in and turning it on.
Replace the cartridge sensor - If none of the above steps resolve the issue, it could be due to a faulty cartridge sensor. The sensor detects when a cartridge is inserted and communicates with the printer. You may need to replace the sensor to resolve the issue.
How to resume Kyocera KM4050 kx if it shows paused from printing source e.g computer?
If the status from the printing source writes "paused" despite the green tick, there are a few possible reasons why this may be happening:
- Printer software: The printer software may be set to pause the print job. Check the printer software settings to see if there are any options to pause the print job.
- Print queue: The print job may be paused in the print queue. Check the print queue on your computer or device to see if the print job is paused. If it is, try resuming the print job.
- Paper jam: A paper jam can cause the printer to pause the print job. Check the printer for any paper jams and clear them if necessary.
- Low ink or toner: If the printer is low on ink or toner, it may pause the print job. Check the ink or toner levels and replace them if necessary.
- Connectivity issues: Connectivity issues between the printer and the computer or device can also cause the print job to pause. Check the connection between the printer and the computer or device and make sure it is properly established.
If you're unsure about any of these steps or are not comfortable troubleshooting the printer on your own, it's always best to contact the printer manufacturer or a professional technician for assistance. They can help diagnose and fix the problem safely and effectively.
How can resolve error code 08 in Kyocera FS-1020MFP printer?
Error code 08 on a Kyocera FS-1020MFP printer typically indicates a problem with the printer's firmware or hardware. Here are some steps you can try to resolve the error:
- Restart the printer: Turn off the printer and unplug it from the power source. Wait a few minutes, then plug it back in and turn it on.
- Check the connections: Make sure all cables and connections to the printer are secure and properly connected.
- Update the firmware: Check if there is a firmware update available for your Kyocera FS-1020MFP printer. Updating the firmware may resolve the error.
- Reset the printer: Perform a hard reset on the printer by unplugging it from the power source, waiting a few minutes, then plugging it back in and turning it on.
- Contact Kyocera support: If the error persists after trying these steps, contact Kyocera support for further assistance. They may be able to diagnose and resolve the issue.
Note: These steps are general suggestions and may vary depending on the specific m
How to resolve error code 08 in kyocera FS-1020MFP
Error code 08 in a Kyocera FS-1020MFP printer is a communication error and can be resolved by trying the following steps:
- Check the cable connections: Make sure that the cable connections between the printer and computer are secure and properly connected.
- Restart the printer: Turn off the printer and then turn it back on. This can often resolve communication errors.
- Try a different cable: If the error persists, try using a different cable to connect the printer to the computer.
- Update the printer driver: Make sure that you have the latest printer driver installed on your computer. You can download the latest driver from the Kyocera website.
- Reset the printer: Perform a reset on the printer by unplugging it from the power source for a few minutes and then plugging it back in.
- Check the computer's firewall settings: If the error persists, check the firewall settings on your computer to make sure that it is not blocking communication with the printer.
- Contact Kyocera support: If the error continues to persist, contact Kyocera support for further assistance. They will be able to provide more specific guidance for resolving the error.
Solve the problem of the image fading in some lines in the Kyocera 3050
The problem of image fading in some lines on a Kyocera3050 printer could be caused by several factors. Here are a few troubleshooting steps that can be taken to resolve the issue:
- Check the toner level: Make sure that the toner cartridge is properly installed and that there is enough toner in it. Low toner levels can cause image fading or streaking.
- Clean the printer: Clean the drum unit, the corona wire, and the primary charge roller. Dust and debris can accumulate on these parts, which can cause image fading.
- Check the drum unit: Make sure that the drum unit is properly installed and that there are no signs of damage or wear. If the drum unit is damaged, it will need to be replaced.
- Check the corona wire: Make sure that the corona wire is clean and free of debris. If the corona wire is dirty, it can cause image fading. Clean the corona wire with a lint-free cloth or a foam swab.
- Check the primary charge roller: Make sure that the primary charge roller is clean and free of debris. If the primary charge roller is dirty, it can cause image fading. Clean the primary charge roller with a lint-free cloth or a foam swab.
- Check the fuser: Make sure that the fuser is properly installed and that there are no signs of damage or wear. If the fuser is damaged, it will need to be replaced.
If after trying the above steps, the problem persists, it's recommended to contact the manufacturer for further assistance or to contact a professional technician for repair.
What makes my Km-2030 kyocera to shut down unexpectedly whenever I close the Front Cover? How can I fix this?
- Check the cover switch: Make sure that the cover switch is securely in place and that it's not loose or damaged.
- Clean the cover switch: Use a clean, dry cloth to wipe down the cover switch. Make sure to remove any dust or debris that may have accumulated on the switch.
- Check the control board: Make sure that the control board is securely connected and that it's not loose or damaged.
- Update the firmware: Make sure that your printer has the latest firmware update. Firmware updates may include bug fixes or improvements that can resolve unexpected shutdown issues.
- Check for any jammed paper: Make sure that there's no paper jammed inside the printer. If you find any jammed paper, remove it carefully.
Paper jam error
One of the Common error for (Papper Jam) in printer is Error 0x000003eb.
Error code 0x000003eb indicated printer connectivity or printer installation error. If you are trying to install a printer driver but keep getting
Error 0x000003eb prompted, make sure you have logged in as the administrator of the computer and then try installing the driver. If the problem still happens, try the below solution steps to solve this problem. The error message doesn't give you much information as it just says unable to install the printer and gives you the error code 0x000003eb.
The Error Message shows you: "Unable to install a printer. Operation could not be completed (error 0x000003eb)"
The printer connectivity or installation error 0x000003eb occurs because the drivers are somehow got corrupted or incompatible.
We know the printer is a very important part of our day to day life. We all need a printer to get hard copies of our important files and documents within a few minutes.
Error code C7101
Toner Sensor K (black) problem. Probably defective developer unit K
HOW TO RESET CODE C7911 FOR KYOCERA 2550CI
That code indicates a problem with the (K) developing unit, which is the black color developing unit. Try removing and reinserting the black developing unit. If that doesn't work, probably need to replace the developing unit. Hope that helps.
Not finding what you are looking for?