20 Most Recent Kyocera FSC2126MFP AllInOne Laser Printer - Page 3 Questions & Answers

could be a number of things but could be the dv unit.

Upgrade your firmware on the machine (a tech will need to do that) and download the latest KX driver from kyocera support

As an error, the C-4200, refers to laser unit. Sometimes the main charge (mc) cause this error. Remove the mc and check the sound of the laser. If you don' t hear the laser sound, then the problem is the laser unit

go into service mode and print out the maintenance sheet and look for the ucode for factory reset

I don't recommend cleaning a waste toner bottle but if you do just pull it out and empty the toner out its very messy for don't wear anything you don't want to get dirty

fax your cell phone the number that calls up is the fax number

it could be the drums are bad print the color test pages and see what the colors look like if there bad replace the drums for the colors that are bad

The Date/Time settings in FS-3640MFP is in the system menu. Press the system menu/counter key, find (inside the menu) the System and then the Date/Time and change whatever you want. The login usernane and login password is 4000.

This service code means that the waste toner reservoir inside the drum unit is full and that the printer has printed over 100.000 pages.

Unfortunately, you cannot reset the page counter on any kyocera printer. Unless you have an eeprom reader with the appropriate software.

When you are in ready state, type 10871087 to enter the maintenance mode. Then type 251 to go in the section where clean the MK counter. (U251 Checking/clearing the maintenance count). Press Start to reset (if I remember correctly , you will need to type a new counter (000000), not just to clear the old one). After reset, you press Stop key to exit the submenu. Type 001 and press Start to exit the Maintenance mode.

Hello, Power down the unit.Unplug power from wall. Power back up, if the error still happens, there is a small piece of paper somewhere, take toner out and look, or pull down back cover and look in there.

error c3100 is a scanner problem, try cleaning and lightly oiling scanner rails, if this does not help may be scanner motor or pcb. also check if scanner shipping lock is pushed on