If you have a wireless router and it is connected to the DSLor cable modem and Internet then -To connect to your wireless router, the router needsits wireless settings to be configured with the SSID, encryption key etc., alsothe wireless cards and wireless adapters in all the laptops/computers needs tobe configured with these router's wireless settings. Then the laptops/desktopcomputers can communicate with your wireless router and access the Internet via the DSLor cable modem.To connect to your wireless router, the router's wirelesssettings needs to be configured with the SSID, encryption etc. and also thewireless cards in all the laptops/computers needs to be configured with theserouter's wireless settings. Then the laptops/desktop computers can communicatewith your wireless router.Connect a LAN cable from the Linksys to the LAN port on your computer.Open a browser and enter the Linksys configuration URLhttp://192.168.1.1The default login = adminThe default PW = adminYou can protect your router by changing the default admin PW (write it down andput it in a safe place)Go to the wireless configuration and set up the SSID and WPA or WPA2encryption.Apply these settings to the wireless card in your laptop/computer.To secure your wireless network from unauthorized access, please click on thislink and follow my instructions :-http://www.fixya.com/support/r3559128-wireless_router_security
To connect to your wireless router, the router's wirelesssettings needs to be configured with the SSID, encryption etc. and also thewireless cards in all the laptops/computers needs to be configured with theserouter's wireless settings. Then the laptops/desktop computers can communicatewith your wireless router.Connect a LAN cable from the Linksys to the LAN port on your computer.Open a browser and enter the Linksys configuration URLhttp://192.168.1.1The default login = adminThe default PW = adminYou can protect your router by changing the default admin PW (write it down andput it in a safe place)Go to the wireless configuration and set up the SSID and WPA or WPA2encryption.Apply these settings to the wireless card in your laptop/computer.To secure your wireless network from unauthorized access, please click on thislink and follow my instructions :-http://www.fixya.com/support/r3559128-wireless_router_security
verify that the cable are conned correctly. now the ethernet cable that come from the cable modem do not need to be plugin to the port that is label Internet, it need to be plug in any port 1 to 4. then access you router via a ethernet cable and setup the router of wireless access.
Use a ethernet cable and connect to a port on the router, open a web browser and in the address bar enter the ip address for the router. e.g my address for my router is 192.168.1.1 then press enter it will ask for a user name and password, the default ID and password is admin this should take you onto the router. also you can use the reset button to reset the router.
I think you should upgrade the firmware on your router.After upgrading the firmware reset the router and reconfigure it manually.I will also suggest you to create a new wireless network and use security modem WPA.Try to connect to the new wireless network and see if that works.See linksys router setupWatch : How to reset Linksys router.
When youclick Refresh network list, then Choose yourwireless network and then click Connect to your secured WirelessNetwork, it will asks for a Network Key before allowing you to connectinto your wireless network. This Network Key is either the WEP, orWPA or WPA2 Encryption key that is used to configure the Wireless Router. The Passphraseis an alternate way to setup the Encryption key.When you are requested for a Network Key, you can just enter the Passphrasethat was used to configure the Encryption key in the wireless router.http://www.fixya.com/support/r5270415-network_password_network_addressFor information on securing your wireless network,configuring the wireless router and configuring the wireless card in thelaptop/computer, please click on this link and follow my instructions :-http://www.fixya.com/support/r3559128-wireless_router_security
You wil need to check the settings of your router.Connect the computer to the router and check the wireless settings.See How to find wireless network key
Are you trying to setup router?You can do it manually without CD.Connect the modem to the Internet port on Linksys router. The connect one computer to Ethernet port 1 on Linksys router.Open the setup page of the router and change the settings manually.See Linksys router setup
Which password you are looking for?If you are looking for wireless network password then you will need to access the router setup page and check the wireless settings.IF you are looking for password to access router settings then default password of Linksys router is admin.To check the wireless network password see How to find wireless network key WEP WPA
You can change the wireless security settings on your router so that no one can connect to your wireless network.To change the security settings, you will need to open the setup page of the router.First connect the computer to the router with the Ethernet cable and then change the wireless settings.See Linksys router how to
Your Internet service provider is comcast cable company. You need to open the setup page of the router and change the Internet connection settings manually.Connect the computer to the router and modem to the router.Open the setup page of the router using 192.168.1.1Click on MAC address clone. Enable it and click save settings.Power cycle the router and your main computer will be online.Then you can change the wireless settings manually.Click Linksys router setup steps
