Linksys Wireless-G WRT54GS Router (e125894) - Answered Questions & Fixed issues

https://watchonlineclub.com/watch-online-gold-full-movie-2018.html can you tell me the company name of router? then simple solution a small hole at the back side of router you can see. use a small pin and insert it in ... then router will reset the settings. go to browser and use this IP address (192.168.1.1) in address bar after connecting to browser. then use the admin admin user name and password.

Reset the router to default....the default username and password is usually on the bottom of the router..then open a web page on your pc and connect the router with a network cable..type 192.168.0.1 or 192.168.1.1
Use the generic name and password to logon....once logged in, configure username and password and wifi...once setup..save and exit..disconnect and connect router to internet modem...log onto pc and look for your wifi neteork name..cheers

It is ALWAYS best to use the products Main page for firmware updates.

For linksys:
http://www.linksys.com/servlet/Satellite?c=L_CASupport_C1&childpagename=US%2FLayout&cid=1166859837314&pagename=Linksys%2FCommon%2FVisitorWrapper&lid=3731486492B45&displaypage=download

Do you know your SSID and password for your wireless account? I’m happy to help further over the phone at https://www.6ya.com/expert/tami_f8d2d553d5094045

LOST ROUTER LOGIN PASSWORD If you have forgotten your personal router login password there is no way to recover it. You will have to reset the router. This means all the settings on the router will be reset to factory defaults. It also means that all your connected devices will need to be connected again with the new security information (WEP, WAP, etc,) . You will need the default admin login name and the default admin password. This can be found in the user guide that came with the router. This can usually be found online at the router manufacturers site. There is usually a button or a switch hidden in a pinhole opening on the back of the router. Pressing and holding the switch for 10 seconds or so will cause the reset and usually the LEDs will flash and blink for several seconds as the router firmware resets and clears out the old information. If you are trying to get into someone else's router illegally there is no way to find out their login password. For future reference, write the password down, or a hint at what the password is, on a piece of tape and secure it on the bottom of the router. I use my cell phone memo function to store all my passwords. Linksys Home Networking

I had some also facing same issue with my router. I tried a lot however nothing helped me, I just visited LINKSYS Tech Support and made a call on their toll free. I got instant help for my router by a certified technician. Hope this will help you

you dont need cd installation to configure linksys router

goto ip addrees default ip is 192.168.1.1
is going to take you to configure setup screen

i can give you suport i work for linksys and verizon internet

Hi,

Welcome to fixya

Yes ipod touch support linksys WRT54gs router.

Thanks

It seems that the installation files from the disc is corrupted. I suggest that you first connect your laptop to another router so you can download the drivers from Linksys Support Site. Under Downloads tab, you must choose the right version which can be found at the bottom of the router. Then install the said drivers before you connect to the WRT54GS router. Hope it helps.

You download the software needed to configure your Linksys wireless router from Linksys website.

If you have version 7.2 click below
http://downloads.linksysbycisco.com/downloads/WRT54G-v7.2_Setup_Wizard,0.zip

If you have version 7.0 click below
http://downloads.linksysbycisco.com/downloads/WRT54Gv7-EU_v7_00_4,0.zip

Take your pick.

http://downloads.linksys.com/downloads/WRT54GS_V72_QI_NC-WEB,0.pdf

It sounds like you may be having IP address conflicts. Many Xbox users have a fixed IP address set in their unit and then have a Port Forwarding done in the router to provide faster play. If you reset the router all this is lost. Then what can happen is that the router will assign a device the reserved IP address of the Xbox. When you turn the Xbox on, then it cannot connect as there is another device already assigned that address. Reconfiguration is required to prevent IP conflicts.

Go to the linksys website at www.linksys.com, select your router, and you should find a link offering a driver download.

Hello and Welcome to FixYa!

You download the software needed to configure your Linksys wireless router from Linksys website.

If you have version 7.2 click below
http://downloads.linksysbycisco.com/downloads/WRT54G-v7.2_Setup_Wizard,0.zip

If you have version 7.0 click below
http://downloads.linksysbycisco.com/downloads/WRT54Gv7-EU_v7_00_4,0.zip

If you are not sure, try anyone.

If i was helpful, kindly do rate me.

Regards,
Waqar

To reset the Linksys back to the default settings - Press and hold the pinhole RESET button at the back of the router with the power ON for 20 secs. then release the RESET button. To connect to your wireless router, the router's wireless settings needs to be configured with the SSID, encryption etc. and also the wireless cards in all the laptops/computers needs to be configured with these router's wireless settings. Then the laptops/desktop computers can communicate with your wireless router. Connect a LAN cable from the Linksys to the LAN port on your computer. Open a browser and enter the Linksys configuration URL http://192.168.1.1 The default login = admin The default PW = admin You can protect your router by changing the default admin PW (write it down and put it in a safe place) Go to the wireless configuration and set up the SSID and WPA or WPA2 encryption to protect your wireless network and Internet from unauthorized access. Now apply these settings to the wireless card in your laptop/computer. To secure your wireless network from unauthorized access, please click on this link and follow my instructions :- http://www.fixya.com/support/r3559128-wireless_router_security

your router is not compatible with your network. There are two networks, g and n. You can get a router that is compatible with both but if you have a g network and an n router they can't communicate.

Have you rebooted the computer and the Kodak. Try deleting the device in the compter and reinstalling.

TYPE 192.168.1.1 FOR ACCESS TO ROUTER SITE....BEST, GERSHON....

Check your Acer has the wireless device and driver been installed.If so then - To connect your computer to a wireless router, you click the Refresh network list, then Choose your wireless network and then click Connect to your secured Wireless Network, it will asks for a Network Key before allowing you to connect into your wireless network. This Network Key is either the WEP, or WPA or WPA2 Encryption key that is used to configure the Wireless Router. The Passphrase is an alternate way to setup the Encryption key. When you are requested for a Network Key, you can just enter the Passphrase that was used to configure the Encryption key in the wireless router. http://www.fixya.com/support/r5270415-network_password_network_address For information on securing your wireless network, configuring the wireless router and configuring the wireless card in the laptop/computer, please click on this link and follow my instructions :- http://www.fixya.com/support/r3559128-wireless_router_security

Normally,default username and password of Linksys router are 'admin' .orusername can be blank and password is 'admin'. I think ,you must refer to your wireless router support manual. It can vary depending on your router brand or model . You can also visit online to check model no and their default login details.