20 Most Recent Linksys Wireless-G WRT54GS Router (e125894) - Page 9 Questions & Answers

this should help you

http://homesupport.cisco.com/en-us/wireless/lbc/WRT54GS

click downloads and download the set wizard.

move the laptop away because within 3-5 ft of the router is a dead spot. if you still don't see the routers wireless network, change the channel of the wireless. The channels 1, 3, 6, 9 & 11 should be good.

The drivers are out of date.

wired the desktop into the router and once you have internet, try this:

Step 1.open the device manager

• right click "My Computer" and click properties
• go to the hardware tab and click device manager

Step 2.update the driver

• click the + sign beside network adapters
• right on the wireless adapter that you have
• click update driver and update the driver automaticaly

May be the Caps is not right or the password for your router might have been change. Good decision in trying to connect your kindle to another hotspot, you need to isolate the problem here. If your able to connect wireless, tell me so that we can try different steps the fix this problem. It mat also be a problem the wireless channel for your router.

Hi

it may be a problem with the ip address
try this

go to start>control panel>network and internet>network connection/network and sharing center.

for XP:
right click wireless network connection>go to properties>highlight internet protocol (TCP/IP)> click properties> make sure that both radio buttons are on Obtain..

for Vista:
go to Manage network Connections ( on the upper left-hand cable ) > right click wireless network connection>go to properties>highlight internet protocol version 4 (TCP/IPv4)> click properties> make sure that both radio buttons are on Obtain

It's possible.. try using LinkSys "Live Chat" if the online help or CD is not getting the job done for you. The support people there should be able to quickly identify the cause of the 322 error.

LinkSys used to have 24/7 telephone support, but that is gone. The Live Chat is the closest thing you're going to get to that.

Good luck!

Please take a look at my write-up here on FixYa Tips:
http://www.fixya.com/support/r3569675-how_to_secure_your_wireless_access_point

Good luck and please rate the answer :)

Ayt, there should be a reset button on the router where you press and hold it for at least 8 secs while the router is on. That should fix it. Now, you need to make sure that your router is secured to prevent unwanted access from neighbors and limits only access to your computers. to access it, connect a pc on the router via wire, open a browser and type http://192.168.1.1 on the address bar. It will open the router's configuration screen. from ther you can play around with security, Basic security for wifi is WEP or WPA but I would suggest MAC filtering for more security if you are familiar with MAC addresses. Post a comment if you need further details and instructions.
Hope this helps..

Local acces only means that your conenction is ok justthat the network security on your router and laptop is not the same try removing the erouter security or try changing the security in your laptop to match what the router has .........

^_^

by closed, you mean secure the wireless signal? plug a pc directly up to one of the lan ports on the router. Now open a web browser and visit http://192.168.1.1 username is blank and pw is admin by default unless it has been changed in the past.

Now, go to the wireless tab, find the security section, there are usually radio buttons or a drop down showing several types of encryption. WPA-2 should be one of the methods, choose it, create a passphrase for the password and then click save. Now on your laptops or wireless computer, disconnect from the wifi network, click the advanced tab and remove it from your preferred networks, now refresh and look for your wifi network, click connect then enter your passphrase. Repeat for all 4 computers. Your wifi network is now secure.

Hello glorynetmari, You can get the drivers for your router at the following link:

• http://homesupport.cisco.com/en-us/wireless/lbc/WRT54GS

Just click the downloads tab on the bottom left hand of the page and choose your revision. (The revision number is usually located right after the model number on a sticker on your router.) Post a reply with any further questions or please rate this solution if it was helpful. Thanks! Edward

> excellent connectivity

This refers to the wireless connection between your computer & your router, not to the connection from your cable-modem (or DSL-modem) out through your ISP to the Internet.

If you use an Ethernet cable to connect your computer directly to the cable/DSL modem, do you still have "intermittent" problems?
If so, then your router (or other wireless devices, such as your neighbours' router, or your neighbours' wireless telephones that are trying to operate on the same broadcast frequency) is the problem.

What are you uploading (torrents)? Have you configured port forwarding on the router properly?

You should have no problems. Wireless is a protocol onto itself which is not OS specific. Hence the ability to use game consoles, security cameras and even phones on a wireless network.

If you're happy with the performance of your wireless G router then I would continue to use it.

If you want the increased speed of an N network to compliment the windows 7 machine you have, then I would upgrade the Linksys to another router.

They're rather inexpensive now (N Routers).

One can pick one up for $59 to $89 to $109 nowadays, which was the price of a G router just 1 or 2 years ago.

I wish you luck in deciding what router to use in your network.

Too bad. The quickest/cheapest way to proceed is to buy another router, either online (through 'www.UsedEverywhere.com') or at a "big-box" consumer electronics store, for less than $50.

Hi. First issue why your laptop cant connect to your router is regarding witht the password. Make sure that you are typing in the correct password of your router. Check the type of authentication used e.g WPA, WEP etc. Second issue, is this the first time you used windows 7 OS in connecting to your router. There are issues in linkys routers that is not compatible with windows 7 and you need firmware upgrade for your router. You can also try to test the connectivity using a wired conncetion (LAN cable) conncet directly to your router nd se if you were able to get an internet concetion using a wired connection.

Have a good one! If you need further help, reach me via phone at https://www.6ya.com/expert/elixirjose_00375ea24bd8141b

You will need to check the wireless settings of the router
is there any computer connected to the router ?
If yes then you can open the router set up page on that computer.
Router set up page is the page where you can check all the wireless settings of the router.

Click here for step by step instructions