Top 20 Xerox 212 Laser Printer - Page 9 Questions & Answers

Your message does not qualify as a question or query for a problem, try somewhere else DO NOT MAKE THIS SITE WITH YOUR GARBAGE Take your GARBAGE to another Side Your message qualifies as SPAM

Try this link: https://www.support.xerox.com/support/xerox-8830-printer/support/enus.html

Try this link: https://www.support.xerox.com/en-us/article/en/2095410

Try this link: https://www.support.xerox.com/en-us/article/en/1815693

Simple Steps That Can Fix Printer From Printing Blank Pages:
· Press the button next to Menu option.
· Now click on the button next to Test menu.
· Click on More.
· Locate the option for print fonts.
· Click on the key next to PCL.
· Now the device will print the font list.
If you still get blank printed pages, there might be some other issues as well which needs to be sorted out at first. There can be issues in software or hardware which needs to be found out and that can be resolved by professionals. If you need any such help, you can call on our Xerox Printer Support Number +64–48879116. We will help you with the solution at any day and anytime.

Reset it via your software and add some paper!

replace the waste toner

Fix Firmware Reset Xerox Phaser 3020 https://yazicireseti.com/fix-firmware-reset-xerox-phaser-3020/

Hi, Power off the printer. Then open the front cover of the system where you replaced the toner .then press an hold the two switches on the printer and switch on the printer while holding down the push buttons ( switch) then when the switch light stops blinking, release the two buttons and that should reset the printer.

keep power off and re insert cartridge...

Upgrading the firware device

Check the flag on reg sensor (before drum)

Try this link: https://printcopy.info/?mod=erc&brand=Xerox&model=WorkCentre+5024

you need to reload the printer driver. the proper one for that OS and your network. once that is done the prints will actually print the way they are supposed to. if the driver reload doesn't automatically fix the problem you may need to manually go in through devices and printers and find the printer on the network and install it manually that way too.

In 310-380-00 fault on xerox 7855 The fuser delta value between the temperature sensors A and B is to high. Check the fuser module connector and fuser connector assembly for damage. • Check that the photoreceptor fan, PL 90.25 Item 7 is working correctly and that the direction of air flow is into the machine, refer to the 390C Photoreceptor Fan RAP. Check that the intake grille at the rear of the machine is not blocked and there is not a heat source such as a radiator. For the more details visit the link: https://printcopy.info/?l=en&mod=erc&brand=Xerox&model=WorkCentre%205855&code=310-340-00,%20310-350-00,%20310-360-00,%20310-365-00,%20310-380-00

I am not sure that win 10 is supported by your printer but try this site to download scan drivers https://www.support.xerox.com/support/workcentre-pe114e/file-download/eneg.html?operatingSystem=winxp&fileLanguage=en_GB&contentId=49145&from=downloads&viewArchived=false

You can fix Fault code 004-346 on Xerox 7346 by following these steps:

1. Make sure all shipping restraints
2. Run the Belt Edge Learn Test from the diagnostics
3. Reseat the Accumulator Belt
4. Did the error clear?
5. If not replace the Accumulator Belt 6.If the error still continues replace the Engine Control Board

For the more detail visit the link: https://www.orionmarket.com/product_error/14541/Xerox/Phaser-7760/xerox-7760-error-code-004-346

DOES IT GIVE A FAULT CODE?

https://forum.support.xerox.com/t5/Hardware/Error-Code-004-350/td-p/218578

https://forum.support.xerox.com/t5/Community-Suggestion-Box/Xerox-Fault-Codes/td-p/17168 https://mans.io/files/viewer/344228/219 https://www.scribd.com/document/328638143/Xerox-c75-Press-Manual https://www.google.com to search for more information.