Top 20 Xerox 212 Laser Printer - Page 3 Questions & Answers

not a car, moved you post in English please.

Question edited for clarity. Please don't type in all CAPS, it is considered SHOUTING which is rude and it makes it harder to read. Lower case additions are mine! You need a service call

Error code 045 315 - Customer Support Forum

https://forum.support.xerox.com > Hardware > Error-co... Nov 29, 2021 · 2 posts Please take a look at this article about the Fault Code 045-315 in the online support for your machine. Please consider contacting your support ...

• Fault Code 045-315: Video Line M Fault - Support - Xerox

  https://www.support.xerox.com > en-us > article Sept 21, 2015 - Fault Code 045-315: Video Line M Fault · Try these solutions · Did this help?

Error Code 045-315 - Copytechnet

https://www.copytechnet.com > ... > Xerox Oct 18, 2019 - Check, replace Y M Ros unit. Or replace bad MCU pwb. Xerox 700 error code 045-315 Sept 8, 2019 xerox 700 error code 045-316 May 31, 2019 Error Code Xerox 700 Fault Code 045-360 Sept 25, 2017 Xerox 700 Help please May 20, 2017 More results from www.copytechnet.com

Xerox 700 color press error 045-315 - Color Printing Forum

https://www.colorprintingforum.com > threads > xerox-... Aug 17, 2013 - I believe that error is referenced as being a YM (yellow/magenta) ROS assembly fault. This is the black box laser mirror assembly. xfactor ...

It is the Supplies Activation code. It can only come from Xerox themselves. It ties you to buying supplies from them. If you put in a refilled toner it locks the machine.

Activation Code required - Customer Support Forum

https://forum.support.xerox.com > td-p Aug 18, 2020 · 4 posts Hi, we have a Xerox Workcentre 7530. Since today morning the printer shows suddenly we should enter an activation key.

• Enter the Supplies Plan Activation Code - Support - Xerox

  https://www.support.xerox.com > en-us > article Touch Device Settings>Supplies. Select Enter Supplies Plan Activation Code. Enter the new code. Touch OK. Enter the Supplies Plan Activation ... ..

The P error code on a Xerox XC 1040 copier typically indicates a paper jam or paper feed issue. Here are a few steps you can try to troubleshoot the issue:

1. Check for any visible paper jams in the paper tray, the paper path, and the exit area.
2. Remove any jammed paper and clear any debris from the paper tray and paper path.
3. Make sure the paper tray is loaded correctly and that the paper is not wrinkled or bent.
4. Check the paper guides and make sure they are adjusted correctly for the size of paper you are using.
5. Check the paper sensors and make sure they are clean and not obstructed.
6. Check the paper feed rollers and make sure they are clean and not worn out.
7. Try to copy again and see if the issue is resolved.

It's important to note that the P error code could be caused by other issues such as a malfunctioning paper feed assembly or a software issue, if the problem persists after trying these steps, it is advisable to call a technician for further assistance. Have the machine's manual close by and have the model number and the serial number of the machine when you contact the manufacturer or a technician for further assistance.

If your Xerox 8080 printer is giving a flash on the LCD screen when you try to power it on and then immediately shutting off, there could be a few different issues causing the problem. Here are a few things you can try to troubleshoot the issue:

1. Check the power supply: Make sure the power supply is properly connected and functioning. If the power supply is damaged or not functioning properly, it can cause the printer to give a flash on the LCD screen and then shut off.
2. Check the printer's connections: Make sure all of the printer's connections are secure and properly aligned. If the connections are loose or damaged, it can cause the printer to give a flash on the LCD screen and then shut off.
3. Check for any other visible issues: Inspect the printer and its components for any visible issues that may be causing the problem. This can include debris or foreign objects that may have gotten stuck in the printer, or damage to the printer or its components.

If you have tried these troubleshooting steps and the problem persists, it may be necessary to have the printer serviced by a professional. A technician will be able to diagnose the problem and determine the necessary repairs.

It sounds like your Xerox 5855 printer is experiencing a technical issue that is causing black stripes to appear on the printed pages and an error message to be displayed. There are a few things you can try to fix the problem:

1. Check to make sure that the printer is properly connected to the computer and that all cables are securely in place.
2. Check to make sure that the printer is fully operational and that all the necessary components, such as toner and ink, are installed and functioning properly.
3. Check to make sure that the printer driver and software are up to date. You may need to download and install the latest version of the driver and software from the Xerox website.
4. Clean the printer's printhead and roller. This can help to remove any dirt or debris that may be causing the black stripes to appear on the printed pages.
5. Check the printer settings to make sure that the correct paper size and type are selected.
6. If the issue persists, you may want to try resetting the printer to its factory settings. To do this, consult the printer's manual or contact Xerox customer support for further assistance.

If you have tried all of these steps and are still having issues with your Xerox 5855 printer showing black stripes on the printed pages and displaying an error message, you may need to have the printer serviced by a professional. You can contact Xerox customer support for further assistance and to find a service center near you.

You must use Genuine Xerox supplies from Xerox, especially if you are on a lease and supplies deal. You slip a refilled or 'compatible' replacement toner from 'The Toner Guys', the machine locks you out until reset by a Xerox tech. https://forum.support.xerox.com/t5/Hardware/Invalid-Toner-Cartridge-error-Workcentre-3615/td-p/199538 and although it is a different model, it is the same series Turns out the WorkCentre 3615 has two types of toners - None Metered 106TO2722 and Metered 106RO2724. Both toner boxes say WorkCentre 3615. You must order the correct one or you will get this error and the machine won't work at all. Who knew? Xerox admitted they sent us the wrong one, so they are offering to fix with a code over the phone. https://www.google.com/search?q=xerox+workcentre+3215+invalid+toner+cartridge //

It sounds like you are experiencing an issue with your Xerox 6605 printer. Here are a few things you can try to troubleshoot the problem: Check the printer settings to make sure that it is not set to make multiple copies by default. Make sure that the printer is connected to the correct computer and that the cables are securely plugged in. Check for any error messages on the printer's display screen and follow any troubleshooting steps suggested. Try printing a test page to see if the issue is with a specific document or file. If the issue persists, you may need to try resetting the printer to its default settings. If none of these steps resolve the issue, it may be helpful to consult the printer's manual or contact the manufacturer for further assistance.

Information on how to disable energy saver mode in the link. https://www.google.com/search?q=Xerox+6655.+error+message+%27a+condition+exists+that+prevents+the+device+from+entering+the+energy+saver+mode%27 ..

Work Center 5016, 5020 Service Documentation - Printertec

https://www.printertec.com.br > xerox > wc5016 PDF Jun 3, 2008 - Xerox service documentation is intended for use by ... This manual is used as the standard service manual for the WorkCentre 5016, 5020. ..

Try to reseat the Document feeder and scanner cables located on the ESS mainboard

Error J6-1 on a Xerox Phaser 5550 printer indicates that the machine has detected a problem with the drum cartridge. Here are a few possible solutions:

• Make sure that the drum cartridge is properly installed. The drum cartridge should be inserted all the way into the machine until it locks into place.
• Check the drum cartridge for any visible damage. If the drum cartridge is damaged, it will need to be replaced.
• Try resetting the drum cartridge by turning the printer off, unplugging it, and then plugging it back in.
• Check the printer's firmware version, if it is outdated, try updating it to the latest version.
• Clean the drum contact area on the printer with a soft cloth or a cotton swab moistened with isopropyl alcohol.
• If none of the above solutions work, it is best to contact a technician or the manufacturer's technical support for further assistance. They will be able to provide more specific instructions for your specific model and can guide you through the process of finding and fixing the problem.

Note that these are general suggestions and your specific case may require different actions. Also, it is important to make sure you are using a genuine and compatible drum cartridge for your specific model of Xerox Phaser 5550.

replace the magenta color toner was empty. buy new one get copy.

Question edited for clarity, wrong type of 'jammed' as opposed to door 'jamb'. There are videos here in case there is some type of 'trick'. https://www.google.com/search?q=Fuji+Xerox+CM305DF+replace+cartridge& ..

fixya is not xerox ---fixya is an online repair help forum

Swapping out boards on guesses is expensive. https://www.support.xerox.com/en-us/article/en/1470317 Looks like your second code should be 62-**3**80? https://forum.support.xerox.com/t5/Hardware/Workcentre-6515-Device-Fault-062-380/td-p/214038 https://www.support.xerox.com/en-us/article/en/2056725 Xerox online help is not particularly helpful! Google is often a better solution, but in your case, you need a service call. One of those new boards may be faulty. https://www.google.com/search?q=Xerox+Workcentre+6515+giving+error+code+63-386 ..

Yes those are all words, but looks like there are words missing like 'to install'. No fear though, Google knows what you mean. Videos; https://www.google.com/search?q=How+software+xerox+c8055+usb+altboot ..

After loading the tray, make sure to select the correct paper type at the control panel.

1. If the Tray Mode is set to Fully Adjustable, the printer prompts you to set the paper type and size.
   1. If the paper size and type are correct, touch OK.
   2. If the paper size or type are incorrect, change the settings.
      1. To select a sheet size, touch the current size setting. Then from the list, select the size.
      2. To select a paper type, touch the current paper type. Then from the list, select the type.
      3. To save the settings, touch OK.
2. If no prompt appears when paper is loaded, set the paper type and size.
   1. At the printer control panel, press the Home button.
   2. Touch Device > Paper Trays.
   3. To open the Bypass Tray menu, touch the Bypass Tray icon. It is displayed in the top position, before the numbered trays.
   4. To select a paper or envelope size, touch the current size setting. Then from the list, select a size.
   5. To select a paper type, touch the current paper type. Then from the list, select a paper type.
   6. To save the setting, touch OK.

Hi, please check for any leaks in your device (possibly the ink cartridges or toners) in order to overcome this issue. Thank you.