Top 20 Xerox 212 Laser Printer - Page 2 Questions & Answers

1. Restart the device: Power off the printer, wait for a few seconds, and then power it back on. Sometimes, a simple restart can resolve temporary errors.
2. Check toner levels: Ensure that the black toner cartridge has sufficient toner. If it is low or empty, replace it with a new cartridge.
3. Clean the imaging unit: Open the printer's front cover and carefully remove the imaging unit. Gently wipe the surface of the black imaging unit drum with a soft, lint-free cloth. Avoid touching the drum with your hands. Reinstall the imaging unit securely.
4. Perform a firmware update: Check if there is a firmware update available for your printer model on the manufacturer's website. If an update is available, follow the instructions provided to update the firmware. Firmware updates can sometimes fix known issues and improve overall performance.
5. Check for paper jams: Open all access doors and paper trays and inspect for any paper jams or obstructions. Remove any stuck paper carefully. Ensure that the paper path is clear and that the paper is loaded correctly in the trays.
6. Reset the printer to default settings: Access the printer's settings menu and look for a "Restore Defaults" or "Reset" option. Performing a factory reset can help eliminate any incorrect settings that may be causing the issue.

First try to Reset the scanner and computer: 1. Turn off the scanner power. 2. Unplug the USB cable and power from the scanner. 3. Reboot (restart) the computer. 4. Plug the USB cable and power cable back into the scanner. 5. Turn the scanner back on.

The 003-319 error on a Xerox 7435 indicates a Video Driver Detection Fail. This error typically occurs when there is an issue with the video driver or the communication between the video driver and the machine. Here are a few steps you can take to try and resolve the issue:

1. Power cycle the machine: Turn off the machine, wait for a few seconds, and then turn it back on. Sometimes, a simple power cycle can resolve temporary communication errors.
2. Check video cable connections: Ensure that the video cable (usually a VGA or HDMI cable) is securely connected to both the Xerox 7435 and the device it is connected to (such as a computer or a server). Disconnect and reconnect the cable to ensure a proper connection.
3. Verify video input settings: On the Xerox 7435 control panel, navigate to the video input settings. Ensure that the correct video input source is selected, corresponding to the connected device. If the wrong input source is selected, it can lead to a video driver detection fail.
4. Update or reinstall video drivers: If possible, update the video drivers on the device connected to the Xerox 7435. Visit the manufacturer's website or use appropriate software to download and install the latest video drivers. If the drivers are already up to date, you can try reinstalling them to ensure they are properly installed.
5. Perform a firmware update: Check the Xerox website for any available firmware updates for your Xerox 7435 model. Updating the firmware can resolve known issues and improve compatibility with video drivers.

If your Xerox 3655i printer is experiencing issues such as a white display and a flashing interrupt button, here are some troubleshooting steps you can try:

1. Power cycle the printer: Turn off the printer, unplug it from the power source, wait for a few minutes, and then plug it back in. Powering it on again might help resolve temporary issues.
2. Check the display connection: Ensure that the display is securely connected to the printer. If there are any loose cables or connections, reseat them properly.
3. Perform a firmware update: Visit the Xerox support website and check if there are any available firmware updates for your printer model. If updates are available, follow the instructions provided by Xerox to update the firmware.
4. Reset the printer: Locate the reset button or option on your printer. It is usually a small hole that can be pressed using a paperclip or a similar tool. Press and hold the reset button for a few seconds to perform a reset. Note that this might reset some settings to their default values, so be prepared to reconfigure them.
5. Contact Xerox support: If the above steps do not resolve the issue, it is recommended to contact Xerox customer support or visit their support website. They will have access to specific troubleshooting steps and can provide further assistance based on the symptoms you described.

Remember to provide them with detailed information about the issue, such as the model number, the exact error message (if any), and any steps you have already taken to troubleshoot the problem. This will help them diagnose the issue more effectively and provide you with the appropriate solution. Please note that printer repairs may require technical expertise, and it is advisable to consult professionals if you are not familiar with the internal workings of the printer or if the printer is under warranty.

I know this isn't your's but it's worth a try, have found this answer for quite a few of their units. https://www.support.xerox.com/en-us/article/en/1270334

This error code could indicate an issue with the drum or fuser. Ensure that the toner cartridge/drum has been seated correctly, and if necessary contact a qualified technician or Xerox support to further investigate and resolve the issue.

Xerox 7435 error code 041-340 indicates a problem with the yellow imaging unit. Here are some steps to solve the error:

1. Power off the printer and unplug it from the power source.
2. Remove the yellow imaging unit and check for any damage or leaks.
3. If the imaging unit appears to be in good condition, reinsert it firmly and make sure it is properly seated.
4. Turn the printer back on and check if the error message has disappeared.
5. If the error persists, try replacing the yellow imaging unit with a new one.
6. If replacing the imaging unit doesn't solve the problem, you may need to call a technician to troubleshoot the issue further.

It's worth noting that error code 041-340 can also be caused by issues with the developer housing, toner cartridge, or other components. If none of the above steps work, it's best to contact Xerox support for assistance.

If you have forgotten the admin password for your Xerox WorkCentre 3225, you can reset it to the default factory settings using the following steps:

1. Turn off the printer: Turn off the printer and unplug it from the power source.
2. Access the control panel: Press and hold the "0" button on the printer's control panel while turning on the power switch. Keep holding the "0" button until "Accessing Service Menu" appears on the display.
3. Access the Diagnostics menu: Press the "Up" or "Down" arrow button until "Diagnostics" is highlighted on the display, then press the "OK" button.
4. Access the Service Tools menu: Press the "Up" or "Down" arrow button until "Service Tools" is highlighted, then press the "OK" button.
5. Reset the password: Press the "Up" or "Down" arrow button until "Reset Password" is highlighted, then press the "OK" button. Enter "1111" when prompted for the password and press the "OK" button.
6. Restart the printer: Press the "Up" or "Down" arrow button until "Restart System" is highlighted, then press the "OK" button. The printer will restart and the password will be reset to the default.

Note that resetting the password to the default will remove any custom settings or configurations you have set up on the printer. It's also important to note that some models of Xerox printers may have slightly different steps, so it's always best to refer to the user manual or contact Xerox support for assistance if you're unsure about any of these steps

Refurbished imaging drums can be a good option to save money, but it is important to purchase them from a reputable source to ensure they are of good quality and safe to use. Some refurbished parts may not be manufactured to the same standards as new parts, which can affect the performance and lifespan of your printer. When purchasing refurbished imaging drums, look for sellers who offer a warranty or guarantee on the product. This can provide added peace of mind and protection in case the drum fails prematurely. Additionally, be sure to follow the manufacturer's instructions for installation and maintenance to ensure optimal performance and avoid any potential issues.

Question edited for clarity and typo.

Fault Code 060-310: Warm Up Failure - Support - Xerox

Xerox https://www.support.xerox.com > en-ie > article Fault Code 060-310: Warm Up Failure. Article Id: 1715946 ' Published: 11/09/2016. Product support for. Phaser™ 7100 ...

Error Codes > Xerox > Phaser 7100 > Code 060-310, 061-340 ...

PrintCopy .info https://printcopy.info > code=060-310, 061-340, 061-... Xerox Phaser 7100 · Code: 060-310, 061-340, 061-346 · Description: ROS Failure Laser error has occurred due to one of the following problems. The SOS is unstable ...

• Error Codes > Xerox > Phaser 7100 > page 1 - Printcopy.info

  https://printcopy.info > model=Phaser+7100 A differential circuit output error was detected between the detection output and the compensation output of the Fuser Unit NC Sensor.

If turning the machine on and off and on again does not clear the problem, your best bet is to contact Xerox support for the machine. That is what Xerox advises. I could suggest going to the printer driver for it on the server and seeing if you can reset that BUT that could waste your time and demand expertiese not at hand. I'd rather not lead you down the primrose path.

1. estart the printer: Turn off the printer, wait a few seconds, and then turn it back on.
2. Update the firmware: Check the Xerox website for any available firmware updates for your printer model. If an update is available, follow the instructions to download and install the update.
3. Perform a firmware reset: Contact Xerox support to perform a firmware reset, if needed.

Error 386: This error message typically indicates a problem with the printer's communication interface. To resolve this error, try the following steps:

1. Restart the printer: Turn off the printer, wait a few seconds, and then turn it back on.
2. Check the cable connections: Make sure that the cable connecting the printer to the computer is securely connected at both ends.
3. Try a different cable: If the cable connections are fine, try using a different cable to connect the printer to the computer.
4. Check the computer settings: Make sure that the computer is set up to communicate with the printer correctly.

If the error persists after trying these steps, I would recommend contacting Xerox support

1. Check the user manual for the Xerox Wide Format 8830. This should provide instructions on how to troubleshoot and solve any issues you may be having with the machine. 2. Contact Xerox customer service for assistance. They should be able to provide you with more detailed instructions on how to solve the issue. 3. If the issue is related to a hardware or software issue, you may need to contact a qualified technician to come and repair the machine.

Most Xerox machine are under a supplies agreement and the machine recognizes that a non coded toner refill has been used. If I remember from previous questions here, it needs to be reset by Xerox. Try cleaning the contacts and reseating the cartridge. https://www.google.com/search?q=Xerox+WC7435+-+Toner+Error ..

The error code 303.777.00 on the Xerox WorkCentre 7845 suggests a problem with the power supply. Since the machine is restarting on its own every 20 minutes, it is likely that the power supply is failing. You should contact Xerox customer support for assistance, and a trained technician should diagnose and repair the power supply to fix the problem.

You have to replace the chips

How do i do Chip Bypass Xerox WC5325? - Fixya

https://www.fixya.com > Forum > Televison & Video 3 hours ago - To bypass the V-chip: You can view the locked shows by pressing the number 9 and QV buttons on the remote at the same time, whenever your ...

Drum CRUM Chip (Reset 013R00591, 13R591) Xerox® WC ...

https://www.partsdrop.com > index.php > copy-drum-ct... Drum CRUM Chip (Reset 013R00591, 13R591) Xerox® WC-5325 style. $14.00. Buy 10 for $12.50 each and save 11%; Buy 40 for $10.50 each and save 25% ... COP 14.00

• Toner Connector CRUM **DMO (Resets 006R01160 ...

  https://www.partsdrop.com > index.php > toner-connect... Toner Connector CRUM **DMO (Resets 006R01160, 6R1160) Xerox® WC-5325 style. $14.00. Buy 10 for $12.50 each and save ... COP 14.00

4pcs Wc5325 Toner Chip For Xerox Workcentre5325 ...

https://www.aliexpress.com > ... > Cartridge Chip Shop toner chip with fast delivery and free shipping. The cartridge has good chip performance and stability, which makes it can restore the chips of the old ... Chip Type: Toner Chip Quantity: 4pcs/lot Use in: For Xerox WorkCentre 5325 5330 5335 Regions: South America, Middle East,Eastern ... US$11.90 ..

On the Xerox XC1250 copier, the status code H3 indicates a high-temperature error in the fuser section. This error occurs when the fuser unit gets too hot, and the copier automatically shuts down to prevent damage. To resolve the issue, try the following steps:

1. Turn off the copier and unplug it from the power source.
2. Wait for about 20 minutes to allow the fuser unit to cool down.
3. Check the fuser unit for any signs of damage, such as cracks or burns. Replace the fuser unit if necessary.
4. Check the power supply and make sure it is delivering the correct voltage to the copier.
5. Plug the copier back in and turn it on.

If the error code persists after trying the above steps, it may be best to contact a Xerox service technician for further assistance. They will have the necessary tools and expertise to diagnose and fix the issue.

The cartridge may not be compatible. I think the Xerox brand part number for the black toner is 106R01480.

Please check the link. Thanks https://www.youtube.com/watch?v=lUkdxnyp8CM