20 Most Recent
Zebra Eltron LP 2824 Thermal Printer - Page 2 Questions & Answers
ZEBRA LP 2844 PRINTING PROBLEM IN USPS SHIPPING ASSISTANT
Are you sure that the page size is wrong, or are you just guessing because of the way that the label is printing? I would uninstall the driver - delete the printer from printers and faxes and remove the driver from Server Properties (in the file drop down in Printers and Faxes). Go to ups.zebra.com/ctp and get the latest driver - you have to have the UPS version of the driver in order to support pass-through printing. Go into your UPS Ship Asst application and make sure that the generic thermal is not checked.
I wish to connect a
By Keyboard / Display unit I'm assuming your using a PC, thin client or dumb terminal. If you are using a PC then the easiest way to do this is to get a bar-code scanner with a USB interface, no programming should be required with possibly the exception being of adding a "Enter" (CR LR) after each scan.
If you have a dumb terminal then you may need to look at trying to use an RS232 connection (if one exists) or a keyboard wedge solution where the scanner is plugged into the keyboard port along with the keyboard.
In any event pin outs would vary depending upon the scanner you want to use and the device you are connecting the scanner to.
Hope this helps
[email protected]
The printer suddenly prints numbers instead of
Could be a problem with the printer driver. Try shutting down the printer and the computer. Then turning both back on. Sometimes printer drivers do weird things, If this does not work you may need to remove the printer driver completely and reinstall.
What is the best way to clean the printing "head"?
Use a Thermal Printer cleaning card. I get mine in with my labels. First turn power off on the Thermal Printer. Insert the card into the feeding path, press form feed or manually pull the cleaning card using both hands until the entire card has been pulled free.
Zebra LP 2824 not printing a barcode
check the driver if the length and the with are correct, print a test page, check if come the windows logo and the test from all label. check if the barcode is biguer that the label, if it is, is not appear.
2 solution is to reset printer to factory defult (press button until flash 4 times and relese the button.
Our LP 2824 Zebra printer stalls with red light
Try another roll of labels? If that doesn't help, it may have a problem with the sensor that checks the starting point of the label. These are old so it's easy and cheap to replace with a similar unit.
Not finding what you are looking for?