20 Most Recent Zebra Z6M Plus Thermal Label Printer - Page 2 Questions & Answers

Contact the manufacturer to find out where you can purchase a new printer head.

Hi. Thanks for your question

Print fainting could be caused by number of reasons. First think to check is ink roll. Replacing with new one would get this out of the way. If it still faints next thing I would do is once you opened the cover try and clean the print head and any visible rollers underneath the labels. Print heads can be cleaned with any alcohol solution. Best would be some kind of electronics cleaning solution. next thing to check would be labels themselves. It happened to me that labels where simply not very well finished and ink would not stick to them. Try roll of labels from other box you may have. If this all failed and your printer still faints labels that it never used to it could be the worse. Your print head may need replacing although this is very unusual for them to fail in this way.
I hope this helped you. Please don't hesitate to come back and ask more questions if this is needed. I've worked with thermal printers for 7 years now and I am sure we can find some solution to your problem.
Thanks for using FixYa

push down the print head assembli and you will see what the probles is then ajust it.

try to clean it, using the cleaning kit that is free when you bought the printer

From the front panel buttons, press setup and scroll down to the password setting, it is factory set at 1234, you should be able to reset it from this panel.

www.lancerlabels.co.uk

You may have your contrast set too high. If it breaks as it feeds under the printhead (while printing) your contrast may be set too high.
You also could have a ribbon spindle issue. Are both ribbon spindles turning?

You have to search though the settings and either configure the media to auto or color.

Usually that means that the labels are missing from the printer. Turn the printer off. Reload the label stock and restart the computer it is connected to. Then it should work properly.

Might foul the ribbon sensor, clean the sensor and try to print again.

re donload software for it maby firmware update cheak settings in software ok

this is a color printer or not

The Zebra ZP 550 will work with the GK 420t driver which is free for download at zebra.com. After installing it restart shiprush and your zebra printer will show up in your printer selection menu.

did you reset this printer to factory setting just visit this link http://blogs.scansource.com/zebra-zm600-how-to-reset-printer-to-factory-defaults/ if you have user guide plz flow that if you dont have it visit this link belowhttp://www.bluestarinc.com/techsupport/ZEBRA/Manuals/ZM400_600_UG.pdf