20 Most Recent Hitachi Deskstar 7K250 80GB (hds722580vlat20) 80 GB Hard Drive - Page 9 Questions & Answers

right click on your drive select properties you will see all used and available space on your hard driveclick start right click on my computer you should see your drive usually C: select properties click tools check now tick both boxes automatically fix files and scan for and attempt recovery on any bad sectors or you could tick one box and wait until its finished then return and tick the other box then select check now,start should schedule this task when restart it will only schedule on restart if its the Primary hard drive with an operating system on it do not do anything while the chkdsk utility is in progress any input may damage your computer hope it helps

right click on your drive select properties you will see all availble space and all used spaceclick start right click on my computer you should see your drive usually C: select properties click tools check now tick both boxes automatically fix files and scan for and attempt recovery on any bad sectors or you could tick one box and wait until its finished then return and tick the other box then select check now,start should schedule this task when restart it will only schedule on restart if its the Primary hard drive with an operating system on it do not do anything while the chkdsk utility is in progress any input may damage your computer hope it helps

rather doing a driver hunt which can take hours

http://download.cnet.com/slimdrivers-free/3000-18513_4-75279940.html

it might take some time being a freeware driver solution

note: it will find all of your outdated drivers

this is a free driver solutions they will automatically search for and find the correct driver also at cnet http://download.cnet.com/2000-20_4.html on the home page you should see a search tab just type in what you are looking for IE: motherboard name sound drivers

http://www.innovative-sol.com/drivermax/ free program, paid update available

hope it helps

are those movies large(most likely) might be that your usb is overloaded suggest you consider using ethernet or other high volume connection

sounds like maybe your computer needs more memory check on how much you have through control panel then system and that panel will show how much is installed and maximum availablei suggest you consider somewhere up to maximum on memory if you are going to do a lot with video

since you have not said what problems are with your cd rom a guessClick start control panel administration tools computer management device manager scroll down cd-dvd rom drives you might see a yellow question /exclamation mark ? ! or a red X right click to update driver you might have to physically unplug the leads for this cd/dvd restart your computer then plug them back this should activate the found new hardware wizard if this does not fix the problem it might be a registry problem if you cant see your disk drive in windows explorer Close all open programs

Click on Start, Run, and type regedit and press Enter Click on the plus signs (+) next to the following folders

HKEY_LOCAL_MACHINE

SYSTEM

CurrentControlSet

Control

Class

{4D36E965-E325-11CE-BFC1-08002BE10318}

This folder is the DVD/CD-ROM Drive Class Description in the registry. Look for any of the following names in the right hand column.

Upper Filters

Lower Filters

Upper Filters.bak

Lower Filters.bak

If any of the above keys shown in step 4 are listed, right-click on them and choose DeleteAfter deleting the keys, close the registry editorReboot your computerOpen My Computer and check to see if your CD or DVD drives have returned. You may also want to open Device Manager and verify that the yellow exclamation and error code on the CD or DVD drive is gone.

hope it helps

restart your computer repeatedly tapping the f8 key to enter safe mode while the screen is black once in safe mode where the only things working will be your keyboard and mouse allowing you to attempt to repair your computer you could select the option start at last known configuration that worked this will tell you if and what file has been corrupted or missing then you will know if its a hardware issue then select restart if the problem still persists f8 back into safe mode you might need to select your operating system to load into safe mode click start control panel administration tools computer management in the left panel events + to expand then system you will see all errors in right panel right click select properties this will tell you what has occurred and the time it occurred you might use the system restore to restore your system to an earlier time click start all programs accessories system tools you should see your system restore option if it is a hardware issue the system restore might not work atleast you will know if its hadware or software relatedhope this helps you

click start control panel administration tools computer management device manager look through all of your devices if you see a yellow question mark?or exclamation mark ! or red xright click to reinstall drivers or

if you can see your usb but its not workingports(com&lpt)right click update driver

sometimes the wires inside the cable will be damaged due to bending or stretching or placing heavy equipment upon the cable

just replace the cable of the hard disk, when you plugged the external disk drive you got that windows could recognize the USB device change the cable everything should work fine again,

check the USB leads that attach to the motherboard usually red-white-green-black make sure they are securely seated and have no dust build up on them dust will cause static and a lot of unforeseen problems

if this fails to fix the problem type in run "regedit" then press ok then you can see registry editor then locate below key. HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E965-E325-11 CE-BFC1-08002BE10318} And remove upper filter and lower filter. Then restart computer then check. Also locate the below key and make sure it's value is 3 not 4. HKLM\system\currentcontrolset\services\usbstor make sure start value is 3 not 4

if still no luckyou might have to install a usb 2 or 3 card they are cheap and easy to install you can buy these on Ebay very cheap hope this helps

What you need to do is that, make a backup from the HARD DRIVE onto another drive or computer then you will have to format the Hard drive. You are getting those errors because the conversion might not have been completed successfully or anything like that.This is how you can format itGo to start, Right - click on "My Computer" go to "Manage"Then go to Disk Management in the Right pane. Then select the drive that you want to format to NTFS.Go right at the bottom, right-click on the desired drive and select format. Formatting a drive n this manner will ERASE ALL DATA from the drive. This is why it is very important to Do a Backup of all your data before you do anything. Format your drive with NTFS

restart your computer repeatedly tapping the f8 key to enter safe mode while the screen is black once in safe mode where the only things working will be your keyboard and mouse

allowing you to attempt to repair your computer

you could select the option start at last known configuration that worked this will tell what file has been corrupted or missing or it might be a hardware problem

then select restart if the problem still persists f8 back into safe mode you might need to select your operating system to load into safe mode click start control panel administration tools computer management in the left panel events + to expand then system you will see all errors in right panel right click select properties this will tell you what has occurred and the time it occurred and you might be able to work your through the problem

by installing the driver of your modem(what ever the modem you are using) may fix this problemso install the driver of modem plus install all the driver like for usb , graphics etc for working of your computer correctly

on system start up time press F8 key for no of times.you can see some option from that you can select repair and continue with options given

Could be...but first,make sure you select full format and not quick format during setup.You can also try formatting using another machine by connecting the hard drive as a removable device.Hope it helps.