20 Most Recent
Lexar JumpDrive Classic Portable USB Data Storage Device, 128MB. (PD0128231) Media - Page 2 Questions & Answers
Have Sony 1GB memory stick
ok
try
these steps:
1.plug your pen drive 32gb in your computer.
2.then open Control panel.
3. open administrative tools.
4.open Computer Management
5. a window label computer management will appear.
6. click disk management
7.locate you pendrive and select delete partition or format it fat 32 or other format convenient for your usage.
ok
hope this will help
cheers
uttam
I am plugging in my jumpdrive. Why is it not
when you insert the device does the led glow, if no then some of the device of your storage device is dead, if the led glow then check the drive in other computer weather it works or not.
When I plug in my Lexar memory stick, and try to
Hi, Neil.
Look in "My Computer" to see if another drive letter was created when your memory stick was plugged in. Sometimes, another drive letter is created. Try dragging and dropping the file you want to save.
In case you are not aware, in each computer, the drive letter for a memory stick could be different, depending how a computer is set up.
Also, try in another computer to see how your memory stick works (if it's OK).
Hope this helps.
USB memory stick won't open.
Test the USB on a different computer, PC or Mac.If the stick is working on a different computer, remove mac battery (if macbook) and unplug mac from power.This can fix problems related to electrostatic charges on USB connectors.If that does not work, then the USB is corrupted.You may have lost your data, If memory is not even detected by Mac and computers, then the recovery software does not work.
free usb recovery mac osx downloadMac data recovery software
Error message 0x80070052
I tried setting up a new folder and transfering the files, this did not work either so I just purchased a new Jump drive. I had plenty of space remaining on the Lexar, however, my time was worth more than the cost of a new drive. I'll keep looking for "free solutions" to my problem and if I find the answer, I'll respond.
How to save my documents to lexar 2gb jumpdrive
You can simply drag the My Documents to the drive, that will make a copy. But you could also use the backup function of Windows (simply type 'backup ' in the Windows help and follow instructions).
Jules
Problems
this measn it is active and getting voltage on the pcd
How to remove write protected in Lexar 4GB
You may need Administrator privileges on your computer.
Plug in flash-drive.
Allow time for Windows Explorer to read it.
Run AV scan if suspect.
To get a list of attributes:
Launch Start > Run > CMD.
From the command console enter
attrib F:
(or whatever the drive letter is for your flash).
to redirect output to a text file enter (example)
attrib f:>%homepath%\flashatb.txt
From the list you should see [H]idden, [S]ystem or [R]ead only attributes for write-protected files.
You can also do it via Win Explorer by right-clicking the drive icon.
Remove all above attributes.
As a last resort, you can full-format the entire flash via explorer.
Which should wipe all files / folders on the drive.
7/5/2018 3:14:42 AM •
Lexar...
•
Answered
on Jul 05, 2018
HOW TO UNLOCK LEXAR MERMORY CARD
There is a little tab on that unit that slides back and forth. If the tab is missing, you need to use a piece of scotch tape to simulate the tab.
2/10/2017 2:10:34 PM •
Lexar...
•
Answered
on Feb 10, 2017
Lexar hi-speed 16GB stix, I NEED DIRECTIONS TO TRANSFER FROM COMPUTER TO STIX
plug the flash drive into a usb port
it will register on the desktop and will be recognized in the computer
and given a designation--- example:- drive h---
select what you want and save as --in h
or copy /paste to h
or if you have 2 screens click and drag to h in the computer section of the second screen
10/2/2016 9:08:58 PM •
Lexar...
•
Answered
on Oct 02, 2016
Not finding what you are looking for?