20 Most Recent LG DRD-8160BB (GDR8161BBGDR8162BB) Burner - Page 2 Questions & Answers

Hi, the typical power button looks like an open circle with a line through the top where the opening of the circle. Usually it's located at the top -right portion of your keyboard. If not there, then please check the sides of your keyboard as well. Thank you.

We don't call anyone. Take it into a computer or television shop for repair. Ordinary people can't fix television monitors.

Yeah, that's not good. The manual provides no information on this at all. It's not user serviceable, in any case. If it's still under warranty, contact LG and see about having it serviced. If it's not, it will need to go to a repair shop to be fixed. A recent discussion I had with a sales person at Best Buy regarding the cost of repairing Digital TV's these days, is that it's usually more cost effective to just get a new TV, as unless it's an in-line fuse that has blown, any repair work is going to generally involve replaicement of the main board, and will end up being a few hundred dollars, pretty close to the cost of a new TV anyway. Sounds like it's time for a new TV.

Hi please visit main menu > then setup > factory reset to attempt to factory reset your device. Please double check your device's manual if this does not work initially. Thank you.

so working on super old 2007 PC monitors. and no PC connected."? it is NOT ANY LED BACK LAMP monitor here. came new with XP PC's. the monitos all good to sleep mode if no PC vidoeo connected. in the usa, even by law, (energy star) how ever lacking a PC, the screen will show "no signal entering sleep mode" VGA monitor. LED = blue on, amber sleep, LED out, oFF. NO 1080P mode allowed, (so common now) <<<< big clue here. set the PC to 1024 x 768 (to test ) 60Hz. using a flash light (torch) tool,. turn on Monitor, see blue LED point flash light to screen, see data, now, on sceen in the beam now you now CCFL backlamps are dead. as most are this old. Display Modes (Resolution) 640 x 350 720 x 400 640 x 480 800 x 600 832 x 624 1024 x 768 1152 x 870 1152 x 900 1280 x 1024 1440 x 900 proof BELOW. A FREE MANUAL TOO. page 47, see 4, CCFL jacks and HV supplies here 600VDC free service manual with full schematics and BOM https://elektrotanya.com/lg_w1934s_flatron.pdf/download.html in my shop I have VGA signal generator to maKE WORK EASY.

https://www.youtube.com/watch?v=IHL1wxni7tY

Change your remote battery

Hello, hope to find you well. You can try the LG ThinQ app for smartphone, that will allow you to control your TV. Hope it helps.

If you get a notice on the screen that the feed is not detected you may want to replace the feed cable to your device. If that doesn't work try the monitor on another device and see if the problem follows.

Hello! If you see that problem it's Automatically It's ok. It's maybe because your 1280x1024 lcd is little bit bigger than the original size! Have a nice day!

So the light usually is there to tell you the psu is receiving power...Does pressing any buttons do anything? Can you remove the battery and reseat it?

When it first turns on, call up the on screen menu. If it still goes off while using the menu, the monitor has a faulty voltage regulator.

The Desktop Charger is here http://www.ashop.me/p/1024660/genuine-lg-desktop-battery-charger-for-lgip-580a-battery---bc-1650.html and in other outlets. https://www.google.com/search?q=LG+BC-1650+desktop+battery+charger ..

Several possibilities. Check Bush manual to see if it list compatible formats. All formats are not recognized by all tv's. I am referring to file types. Secondly, check condition of TV ports. Dust may be a problem. Thirdly, TV port may be burnt out. But as you say the drives are recognized, this is more likely your Bush TV does not recognize the file type. You can try converting the file types and see if they then play.

can we have that in English? PBX an old land line telephone switching exchange , really>? why not start a post telling what it is. in clear English. you posted to computers, is it? what computer is it, and OS does it run? what are the symptoms.? snmp is server that manages resources in the system. no system stated, or told. (total) I'd say your system needs service, from local professionals.

Could be a faulty hdd not initializing. Try a new hdd. 500gb is really cheap to buy, you may cosider an upgrade to 1tb perhaps.

This is the best advice and why. https://www.fixya.com/support/r29790007-repairing_own_television ..

I think that the power board and the power supply inside of your TV might be bad and it would be more easier and cheaper to buy a new TV than to try and repair the one that you have that is broken.

replace the power board with the exact same part number on the board it self.

Great answers as always Larry. Why don't you ever put them down here where answers go :>)