20 Most Recent
LG X-Note LM50 Notebook - Page 8 Questions & Answers
Restore factory settings
On some computers, the disk-drive is "partitioned" into two parts -- your 'C:' drive and a 8GB "recovery" partition. If so, then when you start-up your computer, there is an option to boot from that Recovery Partition, and to reinstall Windows.
On some computers, there is software that lets you burn your own CD/DVDs that can then be used to reinstall Windows. Have 4 or 5 "blank" DVD disks, or 8 to 10 "blank" CD disks, before you run this software.
If you have "lost" the original disks, contact LG. For a small fee, they will ship you a replacement "System Recovery" CD/DVD set of disks.
My LG R405a kept getting the bsod and eventually
Ok this looks like a RAM Module problem, I suspect either the RAM is faulty, or the Motherboard RAM controller, is. This type of fault may possibly be remedied by swapping out the bad RAM and replacing, it. Sometimes it can be mismatched RAM modules? Or it may be the actual Video and/or Video RAM, on the same board. Again replacement is only option.
Drivers sound
google this: sound driver x-note lm50 or go to windows update and download a generic driver
Touchpad is not working
Hello,
If your laptop is an LG. Then try going to an LG authorised dealer or a technician in the country which you are right now. They will definitely help you out. Its just a minor problem.
Best regards
DRIVERS
I lost the drivers CD of my laptop GE50 of LG. please help me to download it.
I have a LG E300 notebook and once i switch it on
Hi,
It can be caused due to any driver clash or antivirus . With some computers if you press and hold a key as the computer is
booting you will get a stuck key message as the computer is booting. If
this occurs instead of pressing and holding the "F8 key" tap the "F8
key" continuously until you get the startup menu.
Windows Advanced Options Menu
Please select an option:Safe Mode
Safe Mode with Networking
Safe Mode with Command Prompt
Enable Boot Logging
Enable VGA mode
Last Known Good Configuration (your most recent settings that worked)
Directory Services Restore Mode (Windows domain controllers only)
Debugging Mode
Start Windows Normally
Reboot
Return to OS Choices Menu
Use the up and down arrow keys to move the highlight to your choice.
As
can be seen from the above example, you should be able to highlight and
press enter to load the last known good configuration. Once completed
the computer should restart and attempt to load into Windows.
Not finding what you are looking for?