20 Most Recent Siemens SN26T252GB Built-in Dishwasher Questions & Answers

Try power cycling it. Turn off at the breaker, press and hold the On button for 1 minute and then turn the breaker back on. https://www.google.com/search?q=Siemens+SN63Hx36TE+iQ300 ..

if it's a built in...usually there are some brackets at the top of the frame when you open the door screwed into the counter top.

Lots of information here for all makes

https://www.google.com/search?q=adjust+the+spring+tension+on+Siemens+SN61HX08VE%2F43+dishwasher

Specifically Siemens.

How to adjust the spring tension on Siemens SN61HX08VE/43

https://www.fixya.com > Forum > Dishwashers > Siemens 6 hours ago - Tension is adjusted by moving the spring to one of several holes in the frame. One way will give you less tension on the door the other way will ..

Is it working now or still the lights are blinking?

Hi Carl,To reset the dishwasher please disconnect the appliance from the network for 10-15 minutes, then reconnect it.Good luckBest,Dave, Just Fixedhttps://www.justfixed.co.uk/

Hi, The varioSpeed symbol means the running time is shortened depending on the washing program. Do you see an error code displayed - Siemens dishwasher error codes inform you that there's a problem with your machine. Please have look here https://www.siemens-home.bsh-group.in/customer-service/support/problems/dishcare/dishcare-error-codes Hope this helps. Best, Dave, Just Fixed

check for debris in valves ---does it have water to fill valve or low pressure

Did you ever figure this out? I am having the same problem.

go see a dealer

When the reset is made you then have to select a new program and press start again then close the door to start.

All you can try is unplugging it for a few minutes then plug it back in.

Possibly the top or the side of the door.

https://www.siemens-home.bsh-group.com/ie/customer-service/support/user-manuals Model number needed to find.