20 Most Recent NorStar BCM 3.6 BCM200 BASE SYS 16 DIGTL STATION MCDN BDL - Page 9 Questions & Answers

Plug the drive into your computer and it should ether open a window automatically where you can copy the pictures, If using windows 10 you will have an option the 1st time you plug the drive in to automatically synch any images found on the drive.

Computers &... | Answered 3 days ago


That ad most likely did not come from this site, but was popped up by malware already installed on your computer, it could have popped up on any site, it just happened to be this one,

Computers &... | Answered 3 days ago

"System Options Not Set" normally means that the battery that maintains those options has gone dead. That's usually a 2025 coin cell on the motherboard.
I would replace that first thing, then set the BIOS options. Usually, there's another message that comes up, "Press F1 to continue, F10 for setup". F1 will let you system boot, most likely, but doesn't set the options. F10 (or whatever it says) will get you to where you can set the options.

Computers &... | Answered 3 days ago

Hi Can you give us a little more information, what kind of e-mail account are you attempting to open, and with what program are you attempting to open it

Computers &... | Answered 3 days ago

unplug the orange cable on the motherboard leading to the dvd-rom and replug it into any of the next available slots(2 or 3).
one of them is white in colour and you have to look closely to see the numberings.
problem is sloved.enjoy.

Computers &... | Answered 3 days ago

If you mean how do you access your router from your phone so you can get at the settings pages, you will need to get on your router from a PC or laptop connected directly to it and enable the remote access option on you router.

N.B. This will make your routers pages accessible via the internet so make sure that your access passwords are strong and that you have security, enabled on you router to prevent anyone getting access and changing your settings.

If you cannot access your router because you have forgotten the password you will need to locate the reset hole and use a pin to reset your router back to the factory defaults, if you can advise what the make and model of your router is, I can give you more advice on doing this

Computers &... | Answered 3 days ago

paint thinner is about the only thing that could be safe for most plastics. but as its dry that will not likely work.
try some extra virgin oil or penetrating oil and rub it into the dots.
if you can get it to take the oil then it will come loose.
but you may have plastic damage anyway where they melded.

Computers &... | Answered 3 days ago


Any printer that is connected to a computer and is connected on a LAN can be configured so all other computers on the same network can print to this printer. This means the computer with the printer attached to it MUST be booted up at all times when other computers want to access the printer.
You need to install the printer driver on the computer and configure it as a Shared printer.
The other computers on the network need to add this printer to their computer.
Follow these steps to set-up a shared network printer -
1. Connect the printer to the computer and install the printer driver.
2. Open Printers and Faxes - right click on this printer and click Sharing - click Sharing tab and click
Share this printer, and then if you wish you could change the Share name, then click OK
3. Right click on the printer - click Properties - click Print Test Page to confirm printer installation.
Follow these steps to configure the computers on your network :-
1. Open Printers and Faxes - click Add a printer - Next - select a network printer, or a printer attached
to another computer - Next.
2. Select Browser for a printer - Next
3. Click on and expand the Microsoft Windows Network down to the computer with the printer - Next
4. Select Yes for - Use this printer as the default printer - Next - Finish
5. Right click on the printer - click Properties - click Print Test Page to confirm printer installation.

Computers &... | Answered 3 days ago

FIXYA is not connected to NSFAS or South African universities.

Please contact NSFAS by telephone or email.

To reach NSFAS, please call Toll Free: 08000 67327
or email: info@nsfas.org.za

Internet world wide web site:

Office hours:
08:30 - 17:00 (Monday - Friday)
08:30 - 16:30 (Saturdays)

Computers &... | Answered 3 days ago

Your computer question is .............

Computers &... | Answered 3 days ago

Not finding what you are looking for?
Computers & Internet Logo

3 questions posted

Ask a Question

Usually answered in minutes!

Top NorStar Computers & Internet Experts

Brad Brown

Level 3 Expert

18060 Answers

Alun Cox

Level 3 Expert

2679 Answers


Level 3 Expert

2360 Answers

Are you a NorStar Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

NorStar Computers & Internet

  • NorStar Computers & Internet

Most Popular Question

find ip address bcm 200

  • Computers & Internet