20 Most Recent Transcend (589307) Media - Page 4 Questions & Answers

First
Write Protection on any portable USB Device can be applied by the physical lock provided on the card adjuster or some times provided on the pen drives, so make sure to make your drive not write protected by moving the lock in right direction.
But even after moving the physical lock for write protection the problem can happen due to some virus action. This happens when some virus or script which applies the registry hack to make any drive write protect when connected to the computer, In that case follow the procedure below to remove write protection from your pen drive.
1. Open Start Menu >> Run, type regedit and press Enter, this will open the registry editor.
2. Navigate to the following path:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\StorageDevicePolicies

Note: If the registry key StorageDevicePolicies key does not exist, you will need to create it

Download this batch file called add.bat from here, and double click after download the key will be automatically added to registry.

3. Double click the key WriteProtect in the right pane and set the value to 0 in the Value Data Box and press OK button

4. Exit Registry, restart your computer and then again re-connect your USB pen drive on your computer. That is it, done.

However if that does not solve your problem try this
Think this write protection error is due to some virus.
Steps to remove write protection for Transcend users
1) Go to download center of the transcend,here is the link
http://www.transcendusa.com/Support/DLCenter
Type the model no. or part of model number you are looking for.
example: JFV30(all alphabets in Caps )
2) Choose other details like product type etc. and search for your product
3)Then select the product which which is most similar to yours from search results
4)Then download the mFormat utility. You will asked for serial no. if you dont have..enter this no. 1456784523
5) Connect your pen drive
6) run the mformat utility and select full format after full format your write protection will be removed. try twice or thrice if you can't correct at first time.
Thats all...

It's an easy
just delete all files manually one to one
that not work contact me at my id on chat
[email protected]
I will tell you the solution

have you made sure the lock/unlock switch is in the unlock position? beyond that the drive may be defective.
thank you,
lee

There's a little switch at the side of your media. Try switching that off and try again.

GO TO 2003 SERVER MY COMPUTER MANAGE AND DISK MANAGEMENT
RIGHT CLICK ON YOUR PEN DRIVE FORMAT NOW

TO USE HP FORMAT TOOL TO FORMAT YOUR PEN DRIVE
NOTE YOUR WINDO ARE ONLY 2003 SERER AND OTHER SERVER
ENJOY IT

Good solution: http://www.fixya.com/support/t6153516-got_message

Sometimes when a flashmemory stick or USB external hard drive fails because it was not removed fromthe USB port properly. If the device is removed byjust pulling it out of the USB port, it can cause the flash device to fail, youmust click on the Safely Remove Hardware icon on the Task Bar and select thedevice you wish to remove and only do so when instructed to do so When the flash memoryUSB hard drive device appears to malfunction it maybe possible to restoreit by reformatting it. Insert the flash or USB hard drive into the USB port then Click on Control Panel - AdministrativeTools - Computer Management - Disk Management. Then right click on Disk 1removable drive and click Format. After the flash drive has been formatted itwill indicate that it is Healthy.

Sometimes when a flashmemory stick or USB external hard drive fails because it was not removed fromthe USB port properly. If the device is removed byjust pulling it out of the USB port, it can cause the flash device to fail, youmust click on the Safely Remove Hardware icon on the Task Bar and select thedevice you wish to remove and only do so when instructed to do so When the flash memoryUSB hard drive device appears to malfunction it maybe possible to restoreit by reformatting it. Insert the flash or USB hard drive into the USB port then Click on Control Panel - AdministrativeTools - Computer Management - Disk Management. Then right click on Disk 1removable drive and click Format. After the flash drive has been formatted itwill indicate that it is Healthy. You need to format the flash or external drive. Format thedrive as primary drive and in FAT32. (FAT32 will allow data to be exchangedbetween MACs and PCs also between XP/Vista and earlier versions of Windows). Otherwise format the USB flash drive in NTFS.
Insert the flash or external hard drive into the USB port then Click on ControlPanel - Administrative Tools - Computer Management - Disk Management.
Then right click on Disk 1 removable drive and click Format. After the flashdrive has been formatted it will indicate that it is Health

Hi,

did you notice a small lock on the left side of the card. You have keep the lock upward in order to unlock the card. Then only you could alter the files

Thanks

then i must tell you that the pen drive is spoilt

your pendrive may be virous affected. Try to remove the spy with good anivirous

try it from bios man u can do it r from device manager k

Hi,

did you notice a small lock on the left side of the card. You have keep the lock upward in order to unlock the card. Then only you could alter the files

Thanks

try it in another pc to see if you get the same result.
if so format the drive to bring it to a nul state then it should work
if not check the connectors are clean, it it still does not work it is
probably defective and needs replacing

i hope this was helpful

There's a little switch at the side of your media. Try switching that off and try again.


Thanks & Regards,
(-_-)

1. Click Start. Click Run. Type cmd and press OK. 
2. Type "set DEVMGR_SHOW_DETAILS=1" (without quotation marks) and press Enter. 
3. Type "set DEVMGR_SHOW_NONPRESENT_DEVICES=1" (without quotation marks) and Press Enter. 
4. Type "start devmgmt.msc" (without quotation marks) and click press Enter. It should open Device Manager.
5. Click View. Click Show hidden devices. 
6. Click "+" to expand "Storage Volumes" and right click on everything that is under Storage volumes. Also, expand Disc Drive and uninstall everything present under this apart from your Hard Disc (Please make u dont uninstall Hard Disc)
7. If there any unknown devices right click it and click Uninstall.
8. Reboot the computer.

If this does not work please let me know.
Thanks

Try formatting this flash card.

Try another USB port on your computer.
If that fails, try to read the pendrive on another computer to see if the pendrive itself has died.

You have to follow the following step. i hope this will help u-------

1. Download the software (transcend Online recovery) from the official site of Transcend.
2. Plug your pendrive to your PC USB port.
3. run the Program and format the pendrive through this program.
4. When you run the program you must have internet connevtion

i will try to give u the link but i cant because i cannot find the link. Anyway u better find the link try to solve this because in this way i had solved one of my problem
Cheers