20 Most Recent TP-LINK TL-WR1043ND Router - Page 5 Questions & Answers

Are you trying to connect to Internet wirelessly or wired?

create a password.

Key in 192.168.0.1 on the address search line in your browser. This should take you to the login page. See http://www.tp-link.com/Resources/document/TL-WR941ND_V3_UG.pdf

Only if each wifi card is connected to a different network. Now if you're talking about two wifi cards in one computer, you may run into interference with the signal. Computers will usually default to one connection anyway. Interesting though.

yes. System Requirements OS: Windows 7(32/64bits), Windows Vista(32/64bits), Windows XP(32/64bits) http://www.newegg.com/Product/Product.aspx?Item=N82E16833704135

Pls use this page to config http://www.tp-link.com/Resources/document/7106503751_TL-WA7510N_V1_QIG.pdf

Just update ur wireless device manually...

contact you internet provider.

The pin code should be printed on the router itself. Each one is different.

the security key is on the label, usually located on the back or botto

Take a flat head, put it on the edge of the router, take a flat pounding hammer and hit the edges near the screws, if you are trying to find, how to turn it on, please be more careful when you type in a question next time.

Enable your SSID broadcast on your router, if not shown, insert SSID and/or password(if needed) manually.

You would need to contact your internet service and ask them for the login, or if lan, just select auto detect.

Try pushing the button for 10 seconds or more, because 5 seconds would be for wps or emergency firmware reload(like for a corrupted firmware).

The model may not be able to do that. Some router allow a blacklist of 20-30 web sites. There is usually a way around though. Look carefully at the setup menus and if supported it should be obvious.

Read the instructions manual and have your ISP crednetial ready. 192.168.0.1 of router address to access via your browser. The only way to set it up is to follow the manual instructions, without a ISP usereame and password you will not be able to connect to anything.

You will have to access your router's security section it goes by different names for different routers. In there you find an option to block or filter the specific website url or address. Provide the brand name of your router for more detailed help. Ceers HoT.

Hello ! If you want to see your wireless network SSID ,go to router by typing 192.168.0.1 or 192.168.1.1 .Go to wireless >security>there you can see you router's SSID . Hope this help.

Here is a link to your answer: http://www.tp-link.com/en/article/?faqid=273

Try resetting it, see this... http://setuprouter.com/networking/how-to-reset-your-router/ , then try the default Username & password... http://setuprouter.com/router/tp-link/passwords.htm