20 Most Recent LG 37LH3000 37" HDTV LCD TV Questions & Answers

Back-light problem. Check and replace damaged component/s at its back-light inverter board, or replace this board as card basis. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. It will be best to replace the inverter board as card basis. http://electronicshelponline.blogspot.com/

What is the problem with colours? Provide more details; please. If you wish to get some details; check the site linked here. Viewing it in "Mosaic" will make surf easy. Surf the site with patience. http://electronicshelponline.blogspot.com/ Pull up older posts there.

To have an IP address, your TV must be connected to a home network or the internet...Is your TV a internet-enabled TV?Then there are three ways.. a) On the TV, go to network settings b) From your router, check the DHCP table of the clients, if your TV is connected to your network, its IP should be listed. c) Visit IP-details.com and get the IP.

To have an IP address, your TV must be connected to a home network or the internet...Is your TV a internet-enabled TV?Then there are three ways.. a) On the TV, go to network settings b) From your router, check the DHCP table of the clients, if your TV is connected to your network, its IP should be listed. c) Visit IP-details.com and get the IP.

HelloIf baklight CCFL tubes become weak, the brightness will be very weak. Now you can see the picture with least brighness. So it is sure that, the backlight inverter board is working well. Just check the CCFL lamps. For a 37 inch LCD tv may have atleast 14 CCFL lamps. When replacing, do replace all at one time. OK.

Go to the input menu and select the HDMI.

Question edited for clarity. It appears to be an LG rather an an IG. https://www.avforums.com/threads/lg-42lb1db-how-cani-remove-the-swivel-base.519459/ Further Help and videos https://www.google.com/search?q=lg+42lb5df+remove+base+stand ..

The screen blank out

Likely a dry connection where the HDMI socket it soldered to the board. https://www.google.com/search?q=LG+PLASMA+TV+MODEL+NO.60PS60-UA+that+is+not+picking+up+the+HDMI Old plasma technology though, time for a new one, as quality has moved on. https://reviewed.usatoday.com/televisions/content/lg-60ps60-plasma-hdtv-first-impressions-review-830 ..

This is the Power Board for it. check those 6 electrolytic Capacitors on the right for bulging or splitting. Don't buy it blindly, it's a guess. The output voltages with a digital multimeter. https://applianceparts.com/item/10217204/LG/EAY62812602/ Many parts are obsolete. eBay has used boards, but they are risky because they are out of scrapped sets. https://www.google.com/search?q=50PN5300-UF+power+board We have a television expert named Larry, but I haven't seen him for a while. This used to be my advice https://www.fixya.com/support/r29790007-repairing_own_television ..

Maybe the disk is not compatible with the DVD player version

It can't be done. The DVD remote will be single frequency for that device only and the LG remote for that LG Blu Ray (or series) only. Companies don't make cross-control between makers easy. The only exception is cable and satellite boxes to allow their remote to also control the television. If you have lost a remote or it doesn't work, this is the answer https://www.fixya.com/support/r29872378-universal_remotes_no_facsimile_remote ..

Question edited for a lot more clarity. All in the link https://www.google.com/search?q=LG+BD590+make+region+free ..

You can't, the LG DVD Remote is single frequency. If you are lucky, the LG Television Remote, might control an LG DVD. If you have lost a remote, have a read of this https://www.fixya.com/support/r29872378-universal_remotes_no_facsimile_remote ..