20 Most Recent
TP-LINK TL-WR740N Router - Page 2 Questions & Answers
Block facebook
On home grade routers you can block all access by time or block keywords, but no both.
7/8/2013 12:39:33 AM •
TP-LINK...
•
Answered
on Jul 08, 2013
The router does not turn on.
If it is getting power from the outlet, and the AC jack is not damaged, by being pulled by the wire, if you more the jack plug does it come on or flicker. The jack could be damaged or the router is toast.
11/7/2012 7:48:02 PM •
TP-LINK...
•
Answered
on Nov 07, 2012
System on,wlan doesn't blink and the rest of the buttons keep on blinking. I am using a different adaptor since my first one died on me today. Everything was ok the night before and when morning c
First, unplug everything. This means, remove all your equipment from any power connection. Many people think that just turning a piece of equipment off and on will solve the problem. Actually as long as the equipment is plugged in, there is power to the circuits this prevents a complete reset.Now, after maybe 30 seconds, plug in the modem and the router and then turn on your computer (I'm assuming there is at least one computer wired to the router). If the lights keep on blinking, push the reset button in the back of the router to try to reset it.If these two things don't work, you can assume the router has been damaged, possibly by a power surge and must be replaced.
4/21/2012 3:18:52 PM •
TP-LINK...
•
Answered
on Apr 21, 2012
I want security key of my router TP-LINK-740
Some later model wireless routers have the Password(ie.Encryption key) and the SSID already configured in the wireless router andthis information is printed on a label on the bottom of the router.These settings can be used to configure the wireless card and wireless adaptersin your computer/laptop. If these settings do not suit you, then it can be changed to suit yourrequirements. The encryption key secures your data and wireless connection from unauthorizedaccess.To configure the wireless settings in the router, connect a LAN cablefrom your computer to the wireless router, then open a Browser on your computerand enter the router's configuration IP address, then enter the admin login andpassword and then go to the wireless settings and configure the SSID andEncryption key.The router's encryption key can be a Passphrase or the WEP or WPA or WPA2key.If you use the Passphrase method select either WEP or WPA or WPA2 togenerate the encryption key. You can enter the WEP or WPA or WPA2 key with 8 to63 ASCII characters or 64 Hex digits.Most people use Passphrase which is easier to remember eg. I was born inJanuary 1988.The strongest and latest security is WPA2, the weakest and oldest is WEP. Toconnect to your wireless router from the computer/laptop, configure thewireless card in your computer/laptop with the router's wireless settings ieSSID, plus the WPA or WPA2 encryption key. Then computer/laptops cancommunicate with your wireless router.
http://www.fixya.com/support/r10267861-network_security_key
12/30/2011 10:49:42 AM •
TP-LINK...
•
Answered
on Dec 30, 2011
How to access my password?
Please do a "Factory Reset" by following the instructions in your manual. Generally there will be small push button in the rear side or back side of the router. You have to push that with a pin. After that the router will have it default password.
The user manual lists the default password. You can access the router with that password.
9/14/2011 6:25:53 AM •
TP-LINK...
•
Answered
on Sep 14, 2011
How to configure TP Link router connected to Thomson TWG850-4 ?
have you got two dhcp servers running ?
turn off dhcp server in wireless router
and use the one in the Thomson TWG850-4 Residential Voice Gateway.
make sure ip address in wireless router is different to the Thomson TWG850-4 Residential Voice Gateway. make it one higher on last digit of ip address
make sure dhcp does not lease out this ip address.
9/10/2021 10:58:38 AM •
TP-LINK...
•
Answered
on Sep 10, 2021
Not finding what you are looking for?