20 Most Recent
Canon Pixma MG5220 InkJet Printer - Page 9 Questions & Answers
Canon Pixma MX870 won’t turn on
my suggestion : take your printer to an authorized service center, probably the printer has a defective electronic board, there is nothing you can do to fix it
How do I reset Canon TS9020 printer to get rid of system error 5b00
Check out the videos on resetting Canon printers. They all follow a theme.Looks like I forgot to include linkshttps://support.usa.canon.com/kb/index?page=content&id=ART170494#:~:text=Reset%20your%20printer%20settings&text=icon.,setting%20you%20want%20to%20reset.https://www.youtube.com/watch?v=oQqMJxYRT3s...
490. What does error 5B00 indicate?
hi
- Restart the ink waste counter.
- First, disconnect the printer's power and USB cables.
- Press the Power button when opening the cartridge lid.
- While plugging the power cord into the wall socket, continue to hold the Power button.
- Press and hold the Power button until the printer begins to reset itself.
- Release it once all of the lights are turned on.
- Wait until the green power light goes out.
- After that, quickly press and release the Power button twice.
- The green light should continue to blink for a few seconds more before stabilizing.
- Close the cartridge door and try printing again if necessary.
Ink spills on your printer are a common cause of the 5b00 error in Windows 10. Reset the ink absorber if the ink absorber is full or the waste ink counter is full.
This quick-fix can be used to clear out several error codes that may appear when turning on the printer. Also, if you are unable to delete the printer in Windows 10, you can use our detailed guide to quickly resolve the issue.
Reset ink level on CANON MP 140 PIXMA PRINTER
How to reset the Canon MP150 after a refill (Step 10 concerns refill; instructions below the steps):
Method1 (Safe Factory Method):
1) Disconnect the printer’s power outlet
2) Press and hold the power button while connecting the power outlet back.
3) While still holding down the power button, press the reset button twice.(red circle with a triangle)
4) Release the power button
The printer takes about 10 seconds to show the number 0.
5) Press + to change the value from 0 to 1.
6) When this value is 1, press colour button; this will light up two leds.
One is for plain paper and the other for photo paper. At this point is feed the printer with paper.
7) Press the power button twice and the printer will print a some stuff (if it doesn't print by itself, then press the "color" button once and the test sheet will print). Don’t worry much about the printed material. I got some stripped lines and some numbers. I believe that my colour cartridge is clogged which is why I got the green strips.
When you print this sheet the value in the display returns to zero.
8 ) Open the printer cover cover (not the scanner cover) and remove the cartridges. With the printer still open, disconnect the power outlet.
9) Close the lid and turn on the printer.
10) Refill cartridges and place them back in their nice little abode in the printer.
Canon mg2520 paper will not feed
I second heather's response. Turns out my wife dropped her tweezers in there.......... Back up and running!
If you open the ink door, you can pick the tract/roller up a little and see if anything is under it. It's spring loaded so dont lift to high. 9/10 chance something fell in the paper shoot! Keep the lid closed when not using!
Not finding what you are looking for?