20 Most Recent TP-LINK TL-MR3420 Wireless Router - Page 7 Questions & Answers

Maybe it's just not configure correctly, get help.

1- check the wireless led if blinking . 2- if not , push the wireless button . 3- check the led blinking again . 4- if not , the problem will be with your router electricity , you might change it .

1- what is the name of your wireless router ? check if the wireless net appear on your iphone wireless network . 2- if yes , you should near to router . 3- if not connected , you should restart your iphone first . 4- if not connected , you should restsrt your wireless router . 5- if not check the connection with other iphone or pc . 6- if not connected the problem will be with your router , reset it .

check language , if not reset router

User name admin password is password or some times it is blank or admin depends on the router from tplink

first, try to use your BSNL troubleshooting guide for check your cable, signal to Noise Ratio, Attenuation Value, Maximum Transmission Unit and always use ADSL Splitter and more factor by http://www.bsnl.co.in/opencms/bsnl/BSNL/services/landline/helpdesk.html and if again this problem arise than set up your modem or router http://www.techsupportrouter.com/

Do Resetting by pressing small button from back and then configure your computer Ethernet Adapter to Obtain IP auto. Try reconnecting it.

printed on sticker

Open internet option's or "create homegroup" option on your pc and enable your pc to become an access point. Doing so will allow the pc to share the wifi with any compatible device. The handset cannot find the IP due to a firewall so turning those off manually would also work but do so only as a last resort.

Computer Repair and Services in Calicut

Yes you can. 1-Login the Web-based Interface ( 192.168.1.1 or 192.168.1.254 or 192.168.0.254) of your wireless access point or extender. 2-go to the settings windows and find the reset tab (usually "reset to factory default) 3-Your are done

first try resetting the router, if that doesnt fix the problem, you will need to re write the firmware(or update it if available). even then if doesnt fixes, you need to replace the unit :/