20 Most Recent
Tag Heuer Aquaracer Calibre S CAF7113.FT8010 Watch for Men - Page 8 Questions & Answers
How do you get the bezel off of a tag heuer 4000
Yes, there are special spring under the bezel, not the bearings. Bezels are stuck/not clicking because they are broke/worn out or very dirty. I would not advise to take off bezels, unless you have replacement springs and proper tools to fit the bezels back on watch. You can find bezel springs on Ebay, or visit your closest watch repair shop and ask them to order springs for you. Rate me, plz.
3/27/2010 10:15:33 PM •
Tag Heuer...
•
Answered
on Mar 27, 2010
Found a TAG Heuer over 20 years ago in the ocean.
Unfortunately it is not possible to make any estimates over the internet. As the warranty for the watch already expired years ago, there is no reason to find any particular Tag Heuer dealer. You can visit your nearest watch repair shop and ask for an estimate.
1/13/2010 3:08:39 AM •
Tag Heuer...
•
Answered
on Jan 13, 2010
I would like to remove movement to clean back side
If it's just a fogged crystal, you don't have to remove the works. Just remove the back and let it sit in a dry (Low humidity) room for a day. Removing the stem is something that should be left to the watchmakers. A fogged lens is from swimming or taking a shower while wearing it when the seals are no longer in perfect condition. Just being in a very humid environment can also fog a lens. Find a "Watchmaker" in your area. They will be better equipped to work on watches, than a jeweler.
12/21/2009 9:10:13 PM •
Tag Heuer...
•
Answered
on Dec 21, 2009
Second hand skips
This is warning: it's time to change the battery. Your watch is fitted with EOL (end of life) feature and this is how the low battery power is displayed. However, the watch will keep running correctly for about two weeks.
Rate me, please.
7/31/2009 5:33:20 PM •
Tag Heuer...
•
Answered
on Jul 31, 2009
Carrera automatic. stops with 8 hours of non
Hi
I hate to be blunt be if it stops after 8 hours of wear, it may need a service! Most watches (particularly automatics which winds constitantly, when being worn).
Take it to your local watchmaker for a assessment? If it's less then 2 years old take it back to your place of purchase with reciepts as most swatch group (rado, longines, and tag etc) have a 2 year international g/t (that what we have here in australia and way, please consult your warranty card for verification!)
7/14/2009 10:28:38 AM •
Tag Heuer...
•
Answered
on Jul 14, 2009
Tag Timer Resets to Wrong Time
Unscrew the crown and press the lower button, this should advance the minute counting hand one press ata time. Pull ot the crown a further stop to advance the seconds hand and again to advance the tenths counter.
6/8/2009 11:31:29 AM •
Tag Heuer...
•
Answered
on Jun 08, 2009
Time is slow, not accurate at TAG QUARTZ watch
Rarely but sometimes, even the jewelers batteries can be low on energy even when new.
Very unusual that an expensive watch does what you're saying.
Has the watch ever been dropped, OR does it have any noticeable scatches or scuff marks along the edges? use a magnifying glass to inspect it carefully.
if you find unusual marks or scratches, you may have been sold a bad watch too.
5/24/2009 5:26:47 AM •
Tag Heuer...
•
Answered
on May 24, 2009
Change the date on my TAG Watch
if it has hands the winder will be screwed in undo this anti clockwise then click it out once for date twice for time, if this helps please rate me joe
4/8/2009 8:24:52 PM •
Tag Heuer...
•
Answered
on Apr 08, 2009
Not finding what you are looking for?