20 Most Recent Siemens Efficient Networks SpeedStream 2623 (SS2623) Wireless Router - Page 3 Questions & Answers

192.168.254.254 is the default IP address of Efficient Networks Speedstream 2623 router.

Default password to login is 'admin'.

try setting your MTU settings to 1500 or higher. Visit

www.speedguide.net/downloads.php

then download the TCP Optimizer. this software should optimize your internet and set your MTU for the proper settings.

http://www.speedguide.net/downloads.php go here and download the tcp optimizer. It should optimize your internet to 1500 MTU.

Hope this helps, have a nice day! ^_^

from the comments and posts listed, it does sound like a problem with the wireless on the router. I second Ersatyle's recommendation to reset the router and reconfigure it from scratch, making sure the internet works fine via cable before trying wirelessly, as this will help to eliminate any issues connecting to the internet itself as opposed to the wireless.

re-configured it the router then try it

To access the SpeedStream 2623 management interface:
1. Open your Web browser and enter the SpeedStream IP address http://192.168.254.254 in the browser Address box. The SpeedStream 2623 will automatically switch to port 88 for management access.
2. On the Login Screen, enter admin in the Password box; then click Login to display the Status screen of the management interface.



3. Under Simple Setup , go to Wireless Settings - take note of the SSID (this is the name of your wireless network). By default the SSID is "SpeedStream".

4. Still under Simple Setup , go to Wireless Encryption:


Option 1:
A. On the Simple Setup > Wireless Encryption screen, select Automatically.
B. Enter a password or password phrase.
C. Click Generate.
D. Take note of Key 1. This is the key that you will have to use on the Wii to connect wirelessly.
E. Save Settings and Continue.

Option 2:
1. On the Simple Setup | Wireless Encryption screen, select Manually.
2. Enter a password or password phrase.
3. In the bottom half of the screen, select #1.
4. Enter five hexadecimal keys; e.g., a number or letter in the range of 0-9 or A-F.
5. Click Enter to save settings and continue.

You're done with the router. Go to the wireless settings of your Wii and configure it to connect to your wireless network. For a step by step instruction go to this site:

http://www.wiichat.com/nintendo-wii-online/5820-official-wii-wireless-internet-connection-guide.html


If you need further assistance, post a reply and I'll try to answer it ASAP.

Good luck and have a nice day!

Hello

If you think that someone is using your wireless network then you should make/change your router password, if you dont know how , just search google for it.

Good Luck

go to command prompt
star->run
type cmd
then type in c:\arp -a
and it will show your address connect in your network
then check the physical address if belongs to your device
if not familiar with the physical address then someone is hijacking your connection

Setting up wireless security(WEP) on a Speedstream 2326 Wireless ADSL Router

-Open your browser and enter the IP address of your Speedstream 2623 router(by default its 192.168.254.2534)
-On the login screen, enter "admin" in the password box rgeb click login and you'll be brought to the management interface of your router.
-Go to Simple Setup and look for wireless encryption, select "manually."
-You can either enter a passphrase so that the router will generate a random WEP key or you can select #1 and key in your personal 10 digit WEP key(note; it will only accept hexadecimal character 0-9 and letters A to F).

Important Reminder: If you will set up encryption on a wireless computer, the connection will be lost and you need to re-associate to the routter and it will prompt you to enter the encryption that you have configured earlier(it will be beneficial if you will print the settings of your router for reference) that's why it is recommnended that you use a computer wired to the router when changing the settings.

the signal strenth is always good>and try this login to ur router and change the channels use 11>or 1>and delete all temp files and cookies and clear history>and reboot the lap top also>and rate me solved if its helped

Use the meter to read for an hour and then for a day.

Digital Energy Monitor - Electrical, Series 1000 / 2000 ...

Siemens https://sid.siemens.com > ... Digital Energy Monitor - Electrical, Series 1000 / 2000 Technical Specification Sheet - Data Sheet for Product. 44908_en.pdf. Product Family: APOGEE; Product ...

Digital Energy Monitor - Electrical, Series 1000 / 2000 ...

Siemens https://sid.siemens.com > ... 538-986_Digital Energy Monitor - Electrical, Series 1000 / 2000 Installation Instructions.

The start button has quit working and will need to be replaced.

You must factory restor siemens simatic to remove password. Or flash it will custom rom as per your siemens model.

Look on u tube they might have one