20 Most Recent Jensen JXP680 Car Audio Amplifier - Page 8 Questions & Answers

Jensen VM9414 Single DIN MultiMedia Receiver with 7 Inch Inch Flip Out...

200 watts

Yup - they are stuck in there good. You need to remove the cover and get inside to remove the disk(s).

Hello gmb_66,

You did not specify exactly which Jensen amp you have. None of the Jensen PowerPlus series I found had high-level inputs. You can go here and select your amp to download the manual. They should also have the connector for speaker inputs.

Most amps that have both high-level and RCA inputs allow you to use one or the other, but not both at the same time. If your head unit has RCA ourputs, those would be the ones to use, because they generally provide a cleaner signal to the amp with less noise.

Hope this helps.

fix losen battery connections wires

Google Search jensen uv10 camera and you will see a good list of references, videos, and cameras available.

It is probably going bad or there is a short.Just simply use a keyed on wire ( radio power is fine) for your sub amp turn on . In otherwords use a power sourde that only comes on when vehicle ignition is turned on. If you use one hot all the time your going to kill your battery, Good Luck !

This is a classic car, most of the Manuel's were bought by Classic car clubs, try https://www.joc.org.uk for a start .

the Brown wire controls the mute function on the aftermarket hands-free kit, Pink Parking Brake wire coming off the back of the unit. This is a safety feature that only allows you to view video while the car is parked. If you wish to bypass this the wire, then it does not need to be connected. can tape them off can tape them off can tape them off

Relist it on Craigslist so you get your money back.

I would go to the manufacturer's web page and look under Support.

touch source button in the upper left corner until the tuner options are on, or until you see the stations,m then hit seek or tune to get the station you wish to play.