Jensen Q2049J 20" TV - Answered Questions & Fixed issues
I have a blue screen
Hey stevennew,my name is Mike Houston of DISH Network and I was going over your post and seenwhere you have a Blue Screen. There is a easy fix to this, if your on TV1 andthe connection from the TV to the receiver is a COAX make sure the TV is onchannel 3 or 4, if your using a RCA cable you will need to go through theinputs of your TV to put it on Video1 or Componet1, I will send a link to helpwith these steps. http://www.dishnetwork.com/SupportSection/video
My jensen tv all of
To remove the lock on the Jensen simpy press and hold the Display Button on the remote for at least 3 seconds whilst pointing it at the TV.
The lock will be removed and the TV will resume normal operation..
Please do leave a vote for the solution. Thanks for using FixYa
Hello, i am trying to move the tv from mono to
Take your remote, go to menu, scroll down until you see sound settings, when you see mono/stereo, use the right arrow and click it until cursor is over stereo, next press enter, that should restore your stereo sound.
My remote will not work What can i do. How
Hello
You can check your reote hansets condition, if you have a mobile phone with camera option. Put the phone onto camera mode, and place your Tvs remote control's front side towrds the lens of the mobile, about a feet away from it, and push remote switches one by one. You can see an image of infrared light comes from it for each button push. If it is there, you can make sure that your remote handset iw working. If not the trouble is with your remote hanset, not at the TV.
If remote handset have infrared emission, as described earlier, and you cannot control the TV with it, the remote sensor inside your TV is faulty. Ok
Dropped tv 5 inch on its face while moving. Tv
It is highly probable that the main board is cracked due to the drop. An experienced TV repair person can run jumper wires across the cracked board. You can verify this by opening the back of the tv up and pulling out the main board and search for cracks on the bottom of the board.
Cannot use remote
Try using the guide that came with this product, if you dont have one, try going to a local store that sells your product.
Quantum Fx REM-600 universal remote jensen tv codes
Nobody uses Universal remotes these days. The original or Facsimile (copy) remotes are available! Google;
make model remote replacement
Remote Codes to operate your JENSEN TV:
JENSEN codes 3 digit:
004
009
Newer JENSEN codes 4 digit:
0004
0009
0133
Depending on the remote control you have, the method to search for the code will vary, below is an example that may work with most remotes.
..
Not finding what you are looking for?