Jensen JER-323 Remote Control - Answered Questions & Fixed issues
I can,t program my universal control,how i program
Hi,
Configuring codes:
- Turn on the component that you want to set up.
- Hold the component key down until the green indicator
light comes on. The green light should come on after approximately 3
seconds.
- Release the component key.
- If you are programming the DVD or CD device press the
"action" key. The red indicator light will come on.
- Within thirty seconds, enter in a 4-digit code number.
The component key lights will blink with an upward motion when a code has
been successfully entered. In this case proceed to step #5. If the code
has not been successfully entered, the componment lights will not blink.
In this case return to strep #1 and start over.
- Test code by pressing "Power" key. If the
component turns off, you've got the right code. Follow the same
instructions to set up your other components. If the component doesn't
turn off, return to step 2 and use the next 4-digit code listed.
Note: If none of the codes
turn your component off, try the Auto Code Scan function.
Auto Code Scan:
The Auto Code Scan feature allows you to set up
your components without having to enter in code numbers. The Jensen will do the
work for you! (It may take a few minutes to find your code using this method.)
- Turn on the component that you want to set up.
- Hold the component key down until the light comes on.
The green light should come on after approximately 3 seconds.
- Release the component key.
- If you are programming the DVD or CD device press the
"action" key. The red indicator light will come on.
- Press "0" - "9" The green light
will blink as codes are sent.
- As soon as the remote turns your component off, press
the "action" key. (You have 1 second in which to press the
"action" key to save the code.) The component key lights will
blink with an upward motion when a code has been successfully entered. The
component is now programmed. To find that code, proceed to Code Readback.
- If none of the codes turn your component off, return to
step 2 and start over. Thank You
Need to know how to program a jenson jer 323 with
Hi,
Configuring codes:
Turn on the component that you want to set up.
1.Hold the component key down until the green indicator light comes on. The green light should come on after approximately 3 seconds.
2.Release the component key.
3.If you are programming the DVD or CD device press the "action" key. The red indicator light will come on.
4.Within thirty seconds, enter in a 4-digit code number. The component key lights will blink with an upward motion when a code has been successfully entered. In this case proceed to step #5. If the code has not been successfully entered, the componment lights will not blink. In this case return to strep #1 and start over.
5.Test code by pressing "Power" key. If the component turns off, you've got the right code. Follow the same instructions to set up your other components. If the component doesn't turn off, return to step 2 and use the next 4-digit code listed.
Auto Code Scan:
The Auto Code Scan feature allows you to set up your components without having to enter in code numbers. The Jensen will do the work for you!
1.Turn on the component that you want to set up.
2.Hold the component key down until the light comes on. The green light should come on after approximately 3 seconds.
3.Release the component key.
4.If you are programming the DVD or CD device press the "action" key. The red indicator light will come on.
5.Press "0" - "9" The green light will blink as codes are sent.
6.As soon as the remote turns your component off, press the "action" key. The component key lights will blink with an upward motion when a code has been successfully entered. The component is now programmed.
7.If none of the codes turn your component off, return to step 2 and start over.
Thanx
Jensen universal JER323
Sorry but to my understanding there are no universal remote codes in
existence for combos. Call an electronics repair shop. Give them the
make and model number of your combo. They will be able to order you a new
remote for your brand and model. If it is not too old they should be
able to get one for you. I got one and it was only $21.00. Well worth it cannot use half of the features without proper remote... Good Luck!
Lost manual
Hi Iam Vortash your manual is available on this site maybe for free some are ..http://www.safemanuals.com hopr this helps Regards Vortash
Kids locked up the TV, need code to unlock it.
Try this: press "Function" and "Mute" on the remote at the same time. This will unlock the channel. Do this if you want to bypass the lock to watch a certain show or channel while leaving the TV locked. All other channels will remain locked and the TV will lock again when it is turned off.
Unlock all of the channels on the TV by entering 0711 or 3308. These are the Jensen factory reset codes that will reset the TV to the original factory settings. By doing this, you will loose any information that you have stored in the TV, such as channel labels and schedules. You will have to program the TV again by going through the entire initial set up.
JER 323 REMOTE
Lost manual for jensen remote control (JER 323) Want to know how to program it again. Thanks
Not finding what you are looking for?