Jensen JR300 Remote Control - Answered Questions & Fixed issues

0298,0299,0291,0295. Try these codes. If you wish to get more details, check the sites linked here. Set-up code list, and Set-up procedure to many popular brand remote controls are given. http://electrohelponline.blogspot.com/ http://remotesearch.blogspot.com/ Selecting the view option, either to Mosaic / Timeslide, can be selected by the drop-down list, by the top left of the display window, will make surf easy.

0276,0782,0285,0281 Check these codes. If you wish to get more, check these links. http://electrohelponline.blogspot.com/ http://remotesearch.blogspot.com/

HelloJensen remote has no setup code with Dynex tV. Avex-6 universal remote has setup code for Dynex TV. The code is 399

press the power button on the jenson remote control. then press in this order up down left right 12679. Then press enter. If that doesnt work tough luck go hack it yourself

here is your manual http://www.remotecodelist.com/remotes/jensen/JR300C.pdf

please vote for me if you found this info useful

hi,
can you explain whats the problem with your remote at the time.
ok

Hi

Here you will find everything about programming it

http://www.remotecentral.com/features/r-jr300.htm

Hi,
1) Try resetting the code search / programming
2) Try quickly tapping the OFF command key (opposed to holding it down for 2+ seconds)
3) Be sure there are fresh batteries in remote
The remote could possibly transmit a lower frequency setting for the 'OFF' state than it does for the 'ON' state. See if there's a setting for ON/OFF commands on the remotes 'Settings Menu'. You can also check the owners manua for your universal remote,l under 'POWER options ON/OFF. Make sure nothings blocking the IR sensor on the TV. Also bare in mind it may not be the remote but rather the TV's IR sensor.
However,
If still no results then send it back and obtain the original remote for the TV, which is always the best option.

http://tvtechwork.webs.com/

HOW TO PROGRAM this remote is in the manual. You can download the manual instructions with codes for FREE at:
http://www.replacementremotes.com/Jensen-Advent-Manuals/Download-FREE-JR300-JR400-JR500-MANUAL-OPERATING-MANUAL.html

i cant give u the exact one ull have togo thru these and find the one that works but here nthey are 0002 0502, 0906, 0112, 0512, 0520, 0115, 0701, 0402, 0805, 0407 one of these 4 digit codes should work just keep tryin them until u find the right one hope this helps

If you don't have a Westinghouse remote the only codes that will work for a universal is the Sony codes, if all else fails you can buy an original remote for about $15 plus shipping and handling at [email protected], just make sure you write the correct model of the TV and your contact information.

Try this as all remote controls work the same when manual setting.
Here you go. This will work with most all universal remote controls. If you don't have the code do the following:
Automatic Programming
With automatic programming, the remote control tests all the codes available on the Code List and assigns the correct code for the selected device. Although this method can be more time-consuming, it eliminates the need to look up codes and enter them manually.

1. Turn off the device with which you want to use the remote control.

2. Press and hold the corresponding button on the remote control
(TV, VCR, SAT, DVD, CAB or AUD) until POWER INDICATOR illuminates. It should take a couple of seconds for the light to remain solid. The remote control is in programming mode.

3. Press and release power button. The POWER INDICATOR flashes once and stays on indicating the unit is in Power Scan mode.

4. Press CHANNEL up or CHANNEL down repeatedly until the device turns on.

5. When the device turns on, press OK to store the code.

Note:
• To exit without storing the code, press BACK.
• T he unit will search for the next code or the previous code if you press
CHANNEL up or CHANNEL down after the device turns on. (go slow you need to press OK when the TV turns on) if you mess up turn TV off and start over.
6. Press any other button. If the device responds, the remote control has been programmed. If the device does not respond, repeat steps 2-5.

Fill free to ask me questions about anything..........................

I have a Jensen Universal Jer 323 remote. My TV brand is Sharp how do i program it and what code number do i use and also instruction for it.

Link to codes for Jensen JR300 remote:
http://www.remotecentral.com/features/r-jr300.htm

Codes for Magnavox:
Magnavox 0054, 1254, 0030, 0179, 0187

I found that these websites should have all the codes and instructions for most remotes
http://www.xdiv.com/remotes/
or http://www.remote-codes.com/
if this helps please give a fixya rating

I found that this website should have all the codes and instructions for most remotes
http://www.xdiv.com/remotes/
or http://www.remote-codes.com/
if this helps please give a fixya rating as thats how we get paid.

Sansui TV codes:
Sansei 0451 Sansui 0463
Link to more codes if you need it:
http://www.remotecentral.com/features/r-jr300.htm

Magnavox TV codes:
Magnavox 0054, 1254, 0030, 0179, 0187

Link to more codes and program instructions:
http://www.remotecentral.com/features/r-jr300.htm

Codes for Sanyo TV
Sanyo 0154

Link to more codes for JR300 remote:
http://www.remotecentral.com/features/r-jr300.htm

Link to the codes for Jensen Jr-300 remote.
http://www.remotecentral.com/features/r-jr300.htm