20 Most Recent Kenwood KDC-6090R - Page 8 Questions & Answers

Andrew maybe model RC-R0607 - ask /check AT https://www.remote-control-world.eu/rc-for-home-theatre-kenwood-c-10_619/kenwood-rc-r0721-replacement-remote-control-p-5922

try unpluging the unit for about five minutes then try again

posssiblitty the sofware need to be up dated

Go to manualslib.com and type in the model number and you will get a 100% free manual while online and also if liked you can purchase a copy for what ever price they may have for that product or you can print it all out for free to I do believe.. Hope this helped...

According to the manual, the aux input for the mpv622 is an optional accessory. If it's installed, you select the aux input by pressing the [SRC] button. Select the AUX/AUX1 display. Then press the [DISP] button for two seconds. The selected input blinks. Press the ? or ? to change the input setting.

http://www.tech-faq.com/how-to-reset-a-kenwood-security-code.html you can try this site and follow the instruction this may help u

Hello Brian, There is no reboot button on this unit. To reboot the receiver, simply unplug AC power for 30 minutes, then while plugging back in press and hold the power button for 5-10 seconds at the same time to reset. Check all the speaker wiring for shorts, make sure they're also not touching the chassis of the receiver, or are not otherwise pinched or frayed. If all looks well, try disconnecting all the speakers and cycle the power off, then on again. Try connecting the speakers one at a time until one of them shuts the Audio down. Check this speaker with a multi-meter and make sure it is reading between 4-8 ohms. If not, the speaker may be blown and is causing the receiver to short out and therefore power the audio down. If you still cannot get any audio through the system, then it likely has bad output transistors, or capacitor and is in need of service. Here is a link to the Operating Manual Good Luck, JP https://www.manualslib.com/manual/286996/Kenwood-107vr.html

Hello Francesco, I sent you the link to the service manual of your Kenwood XD-500, so that you follow the steps to get to the CD changer I hope the information is usefull Greetings Franco Dosil Hola Francesco, te env?o el link del manual de servicio de tu Kenwood XD-500, para que sigas los pasos para llegar al cambiador de CD espero te sirva la informacion Saludos Franco Dosil https://data2.manualslib.com/pdf3/73/7207/720696-kenwood/rdx500.pdf?d49de5368b8f22b833b01cd689435890&take=binary https://www.electronica-pt.com/esquema/audio/kenwood-audio/kenwood-rxd-500-3259 http://www.fixya.com/answer/answerpageslideview.aspx?ctg=mine&fml=0&brd=0&p=2&thid=27262670#

dealer with vin or vehicle and proof of ownership

Actually serial number you can find on gadget body or on gadget papers.

I need help on a 1999 Nissan maxima, I have the same radio

This should be very easy. Kindly take a photo of the harness. Post here and I will help you. Or talk to me at [email protected]

We do not have this firmware.

https://www.hifiengine.com/manual_library/kenwood/kr-9600.shtml I hope this is the model you are referring to

Here's a link to the relevant page of the user manual. https://www.manualslib.com/manual/257829/Kenwood-Krc-579b.html?page=6#manual

Is the signal going to the Scosche from the factory HU or a factory amplifier. If from amplifier you will need something like the Audio Control LC-2i that can handle amplified inputs. You may have done damage to the input side of the amp or the LED circuits.

Probably blown one or both of the 20 amp fuses.

http://manual.kenwood.com/files/B64-1360-00&ved=2ahUKEwj6tJye3ObhAhUkNX0KHSe2C38QFjACegQIBxAC&usg=AOvVaw0RxfGcmdfo50hnTme7xwB0

It can't open

There is a manual here: http://manual.kenwood.com/files/B64-4089-00_EN.pdf