20 Most Recent Kenwood KDC-319 CD Player - Page 2 Questions & Answers

Press and hold the [MENU] button for a few seconds.
"MENU" will show on the display.
Press the [FM] or [AM] button until you see "CLK ADJ" on the display.
Press and hold the [>} button. The clock display will blink.
Use the [FM] and [AM] buttons to adjust the hour.
Use the [>] buttons to adjust the minutes.
Press [MENU] when finished.

Have to contact authorized kenwood dealer, they have a universal code.

www.commandocaralarms.com

try pacparts.com. is it the button or the switch?

Yellow

Thanks!!

Hi jhlehman
I`m going to help you with your kenwood but first;
Could you give me the model number of your radio/cd?

if it didnt come with a wiring harness you will need to purchase one either online, audio link or several other stores have them for purchase.

Unfortunately Kenwood codes are only available from the Main Dealer or by using a Radio Decoding Service who will connect a laptop to read the working code inside your radio`s memory chip (EEPROM)

Goto your local best buy or equivalent and ask them for a wireless transmitter it plugs into your ipod and transmits on the unused portion of the lower band of the radio. like 87.9fm and when the connection is made you can play your tunes and have it come over the radio.

Be sure that the yellow wire from the cd player is connected to a +12 volt source. ONe god source is the orange wire from the cigarette lighter if the cigarette lighter is working fine. If not run a wire from the yellow wire of the cd player to the fuse block in one of the pins marked "bat". Good luck. Please rate.

i would go to walmart and get a wire connector to fit the plug so you don't have to cut the wires that way if you need to put factory back in nothing is cut

some cars have a second wire not with the rest normally yellow it wlii send power tothe player

Hello there,
Here's the Owners Manual with the wiring diagram on Page 29.

http://kenwoodusa.com/UserFiles/File/Global/Consumer/Manuals/KDCMPV7019.pdf

The diagram labels the wire's colors.

I hope that helps.

try using a qtip and rubbing alcohol or a pencil eraser to clean the contacts on the face and subpanel.

CLICK HERE for the owners manual.

Adjusting the time is on page 29.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.

Usually the yellow is the memory. It has to go to a lead that always has power. Car on or off. This way you don't have to keep setting the stations and clock etc... every time you start the car. The blue wire with the white tracer is normally an accessory wire that provides power to a power antenna to make it go up and down if your vehicle has a power antenna, or if you have an aftermarket amplifier it can go to the trigger wire to tell it to turn on. After you power up the unit check the blue wire to see it there's power coming out of it.

Hope that helped.