This is a security issue, such as when you remove a battery terminal in your car.
-
Press and hold the Auto button.
-
While holding the Auto button, push and hold the Track Up button. The “_ _ _ _” will disappear after about 5 sec.
-
Enter KCAR using the <"Arial, sans-serif">remote control from a higher end CD Receiver or any Excelon CD Receiver.
Enter "KCAR” with the remote controller as described below.
“K”: Press TRACK UP key (>>|) after pressing 5 key twice.
“C”: Press TRACK UP key (>>|) after pressing 2 key once.
“A”: Press TRACK UP key (>>|) after pressing 2 key three times.
“R”: Press TRACK UP key (>>|) after pressing 7 key twice.
* If you commit a mistake in the code entry, the unit enters the
code request mode again.
-
Press the Track Advance button on the remote to enter the override code.
-
The unit will enter the All Off or Standby mode if done properly.
Video Unlock:
-
Use a remote from a higher end CD Receiver or any Excelon CD Receiver.
Some Video remotes will work, switch on remote must be set to AUD.
-
Press 55222277 on the remote. There will be NO visual verification when entering the override code.
Head units with a Up / Down Volume control buttons:
-
Press and hold the Volume Up button.
-
While holding the Volume Up button, push and hold the Disp button. The “_ _ _ _” will disappear after about 5 sec.
-
Enter KCAR using the <"Arial, sans-serif">remote control from a higher end CD Receiver or any Excelon CD Receiver.
Enter "KCAR” with the remote controller as described below.
“K”: Press TRACK UP key (>>|) after pressing 5 key twice.
“C”: Press TRACK UP key (>>|) after pressing 2 key once.
“A”: Press TRACK UP key (>>|) after pressing 2 key three times.
“R”: Press TRACK UP key (>>|) after pressing 7 key twice.
* If you commit a mistake in the code entry, the unit enters the
code request mode again.
-
Press the Track Advance button on the remote to enter the override code.
-
The unit will enter the All Off or Standby mode if done properly.