When connecting a cable TV box or satellite receiver, the VCR
Plusi system does not work. Program the timer recording
manually and select the channel on the cable TV box or satellite
receiver before the timer recording starts.
Before set for the DVR to timer recording, present time should be set. No interruption to power suppy should occur durint the set time. If any interruption occur, the set time and all timer record setting will be lost, and no recording will occur. Set it first with present time, and then set to whic time must it start recordng and to end recording.
For clock set do the following.
1* Press [SETUP].
2* Press UP/DN button to select "Set Up" and
press [>]
3* Press UP/DN button to select "Auto Clock
Setting" and press [ENTER].
4* Press [ENTER].
Auto setting starts. This can take some time, up to a few hours
in some cases. The following screen appears when setting is
complete.
* If the time was not set correctly, use manual clock setting or time
zone adjust.
* DST, Daylight Saving Time, shows the summertime setting.
* TIME ZONE shows the time difference from Greenwich meantime
(GMT).
EST (Eastern Standard Time) l GMT j5
CST (Central Standard Time) l GMT j6
MST (Mountain Standard Time) l GMT j7
PST (Pacific Standard Time) l GMT j8
AST (Alaska Standard Time) l GMT j9
HST (Hawaii Standard Time) l GMT j10
For other areas: xx hr
5* Press [ENTER].
Timer recording setting follows:
We would be happy to help you with that. Here is a list of codes that should address your DISH Network remote to your Panasonic DVD Recorder: 627, 614, 777, 633, 554, and 628.
Press and hold the DVD/VCR button located on the top of the remote until all the mode buttons at the top of the remote light up, then release. Use the number buttons to enter one of the codes for your Panasonic DVD Recorder, then press the pound (#) button. If the code entered is valid for the remote, the mode light flashes three times. To check that the code works try several different functions on the remote to make sure it will properly operate your Panasonic DVD Recorder. Keep in mind that some codes may not be compatible with your equipment. If this is the case, please try the other codes listed for that device until you find one that is compatible with your equipment. We hope this helps and thank you for being a valued DISH Network customer!
Phillip Chang
DISH Network Customer Service Representative
307 questions posted
Usually answered in minutes!
627 Questions
462 Questions
520 Questions
406 Questions
457 Questions