20 Most Recent
Panasonic DMR-ES30VS DVD Recorder/VCR - Page 7 Questions & Answers
We have a Freesat Panasonic Blu Ray recorder DMR-BS750 Which will not record BBC1 since it went HD. We can record BBC2 HD and most other channels.
It's possible that your Freesat Panasonic Blu Ray recorder DMR-BS750 may not be compatible with the specific HD format used by BBC1. Here are some troubleshooting steps you can try:
Check that your Freesat Panasonic Blu Ray recorder is updated with the latest firmware. An outdated firmware can cause issues with recording.
Check if the recording schedule is set up correctly for BBC1 HD. Make sure that the start and end times are accurate and that the program is not set to record in series.
Try resetting your Freesat Panasonic Blu Ray recorder to its factory settings. This will clear any possible software errors and may help to resolve the issue.
If none of these steps work, you may need to contact Panasonic customer support for further assistance. They may be able to provide additional troubleshooting steps or recommend a firmware update or other solution.
It's also worth noting that some broadcasters may use proprietary or non-standard HD formats that are not compatible with all devices. If this is the case with BBC1 HD, it's possible that your Freesat Panasonic Blu Ray recorder may not be able to record this channel.
3/6/2023 11:12:13 PM •
Panasonic...
•
Answered
on Mar 06, 2023
How to get into service mode, Panasonic DMR-BCT750
To access the service mode on a Panasonic DMR-BCT750 Blu-ray disc recorder, follow these steps:
- Turn on the recorder and wait for the "Welcome" message to appear on the display.
- Press and hold the "OK" button on the remote control for approximately 5 seconds.
- The service menu will appear on the TV screen. Use the arrow keys on the remote control to navigate the menu.
Note: It's important to be careful when accessing the service mode as it allows access to advanced settings that can affect the operation of the device. Make sure to only make changes if you have a clear understanding of what you're doing, or seek assistance from a qualified technician if you're unsure.
3/3/2023 9:27:28 PM •
Panasonic...
•
Answered
on Mar 03, 2023
Rosen piranha multimedia navigation head unit disk try isn't reading a CD for the DVD player
If your Rosen Piranha multimedia navigation head unit is not reading CDs and the DVD player is not working properly, there are a few things you can try:
- Check the disc: Make sure the disc you are trying to play is clean and free from scratches or other damage. If the disc is dirty, clean it gently with a soft cloth.
- Check the format: Make sure that the disc you are trying to play is compatible with the DVD player. The DVD player may not be able to read certain formats, such as Blu-ray discs.
- Check the connection: Make sure that the cables connecting the DVD player to the head unit are properly connected and not damaged. Try disconnecting and reconnecting the cables to see if that resolves the issue.
- Check for firmware updates: Check the manufacturer's website to see if there are any firmware updates available for your Rosen Piranha head unit. Updating the firmware may resolve any software-related issues that are causing the DVD player to malfunction.
- Reset the head unit: Try resetting the head unit to its factory settings. This may resolve any software-related issues that are causing the DVD player to malfunction.
If none of these steps resolve the issue, it's possible that there is a problem with the DVD player itself. In that case, you may need to have it serviced or replaced by a qualified technician.
3/3/2023 3:58:10 AM •
Panasonic...
•
Answered
on Mar 03, 2023
Panasonic DVD RV62 displays message 'Bye' and does not respond
The message 'Bye' typically appears on Panasonic DVD players when the power is turned off. If your DVD player is displaying this message and is not responding to any commands, it could indicate a power issue or a problem with the player's firmware.
To troubleshoot, try unplugging the player from the power source and plugging it back in after a few minutes to see if it resets. If this does not work, try pressing and holding the power button on the player for several seconds to see if it turns on.
If these steps do not work, it may be necessary to take the player to a technician or contact Panasonic customer support for further assistance.
2/28/2023 5:55:03 AM •
Panasonic...
•
Answered
on Feb 28, 2023
Connecting Sony PS2 to Panasonic HT32LZD85
First off you need to retire that ps2 and join the PS3 revolution, well worth the money although with the recent drop of the inferior x-box 360 the PS3 may follow suit shortly.
Now, I'm gathering from your discription limited as it may be that you had an adapter that connected the the stock cable that was included with your ps2 which consists of the end that interfaces with the ps2 and the end that is ment to provide the signal to your tv which includes your composite video (yellow) and your left and right audio (red&white).
If this is case then it should be a simple matter of removing the adapter that changed the source (ps2) signal to aerial and pluging the yellow red and white cables direct to your tv (standard imputs at the rear of the television should be video 1,2,3 ect.
Then just make sure your tv is on and set to the correct imput and you should be rockin and rolling in no time.
1/26/2023 8:26:49 PM •
Panasonic...
•
Answered
on Jan 26, 2023
How do I set up my clock on Panasonic Omni vision vcr without a remote controller
You can set up the clock on a Panasonic OmniVision VCR without a remote controller by using the buttons on the front panel of the VCR. The process may vary depending on the specific model of your VCR, but in general, the steps are as follows:
- Press the "Menu" button on the front panel of the VCR.
- Use the "Channel Up" and "Channel Down" buttons to navigate to the "Clock" option and press the "Enter" button.
- Use the "Rewind" and "Fast Forward" buttons to set the hour and press "Enter"
- Use the "Rewind" and "Fast Forward" buttons to set the minutes and press "Enter"
- Press the "Menu" button again to exit the clock-setting menu.
1/23/2023 10:12:11 PM •
Panasonic...
•
Answered
on Jan 23, 2023
Can I get my stuck VHS tape out of my Panasonic VCR without disassembling it?
Here are some steps you can try:
- Unplug the VCR and wait for it to cool down. A warm VCR can cause the tape to expand, making it harder to remove.
- Locate the cassette holder release button, which is typically located on the front or side of the VCR. Press the button to open the cassette holder.
- Gently pull the tape out of the VCR using your fingers. If the tape is stuck, try gently rocking it back and forth or wiggling it to loosen it.
- If the tape is still stuck, try using a pair of tweezers or a pencil to gently push the tape out of the VCR. Be careful not to damage the tape or the VCR.
- If the above methods do not work, you can try turning the VCR upside down and gently shaking it to try to loosen the tape.
- If none of the above methods work, you may have to disassemble the VCR to remove the tape. This should be done by a professional as it can cause damage to your equipment and void the warranty.
It's important to remember that attempting to forcefully remove a stuck tape can cause damage to both the tape and the VCR, so it's best to be patient and use gentle techniques.
1/15/2023 1:02:18 AM •
Panasonic...
•
Answered
on Jan 15, 2023
Not finding what you are looking for?