20 Most Recent Panasonic PV-C2010 20 in. TV/VCR Combo - Page 6 Questions & Answers

bad power source or switch

There should be a small hole located on the face or on the side of it. Use a paper clip to stick in the hole. You will have to straighten the paper clip first.

https://www.youtube.com/watch?v=iHBIiRxhe0w

Page 24 of the manual. Rear left side. https://na.panasonic.com/ns/267099_TH-86CQ175CQ165CQ155CQ150CQ143CQ1_U_Operating_Instructions_English.pdf ..

No according to this.

Soundbar with volume passthrough for older television (no ARC)

https://community.roku.com > Discussions > td-p Mar 26, 2022 - My parents have an older Panasonic 42 Plasma TH-42PX80U. These were made way before ARC. Looking for options to deliver louder sound for my ... 4 answers · 0 votes: As long as all sources go through the sound system, ARC is not needed at

Buy a new television! This old dinosaur appears to be made to connect to a laptop only! No HDMI ports and no Composite Video connections that I can see. You would need an HDMI to Serial Port cable https://www.manualslib.com/manual/648891/Panasonic-Th-42pw6.html#manual https://www.google.com/search?q=Panasonic+tv+th-42pw6+connect+to+DStv ..

If you only have the handset, if I remember, you have to unregister it from the base that was paired with it. If you haven't got that base unit, you are stuck. The standard reset is to remove the battery for a couple of hours.

problem could also be inside the display panel.

Question edited for clarity. The language of China is 'Chinese' not 'chaina'. TH or TC? This might be close enough. https://www.google.com/search?q=Panasonic+Viera+TH-37LZ85+manual ..

Plasma TV sets are impossible to get parts for. The problem that you are describing could be many things but the most likey is failing capacitors in the power supply

You could adjust the resolution on your laptop to match the projector, before you start your presentation.

Hi, You can replace parts but first I would check that your remote volume-down button isn't jammed because this might cause the volume to constantly be low or lower. I would also examine the volume-down button on your tv. Thank you.

https://www.google.com/search?q=32inch+panasonic+led+tv+service+code ..

These are for a Universal Remote. They might work. If not please add the remote manufactuer and model # to comments.

NEC TV 070 130 134 040 056 007 019 024 004 213

NEC VCR 012 023 043 048 039

Good luck,
Techjoel

OR



Turn on your TV.
On your Tune In remote, press TV and release.
Press and hold Set until the green light on Tune In blinks once, pauses and then blinks twice. Now release the Set key.
Enter the first three-digit TV code for your NEC from the list which follows:
030, 056, 019
These codes are listed in order of popularity, and the green light will blink twice if you perform this procedure correctly.
Aim Tune In at your TV and press Power. Your TV should turn off. If it does not, repeat steps 2-5, trying each code listed in step 4 until you find the one that operates your TV.
Now Test Your TVWhy test? Many times more than one code appears to work. Testing is desirable to be sure you have the correct code for your TV or the other devices you are setting up.
Press the Power key to turn on the TV, then press mute, channel scan ("CH") and volume ("VOL") keys. Tune channels 7 and 11 by entering the number followed by the Enter key.
If your TV does not pass the test, return to Step 2 at the top of this page. Enter the next three-digit code and repeat the process.

First try this. Does your player have a place to plug in ear phones or head phones? If so use this to see if you can get sound. Then we can work on next step.

003, 054, 055, 062, 070, 148, 149, 170, 171, 374, 381, 437 https://www.directutor.com/content/New_3_digit_codes_GE_Universal_remote_TV

google PV-D4744S remote for more. https://www.remotes.net/products/replacement-remote-for-panasonic-pvd4744s

have you tried all these with the remote? 13833 18250 14039 15716 19503 12362 14333 12055 15532 15355 19617 15659 10508 16940 17845 12001 10916 14912 16513 18310 18810 11520 17127 17731 18649 18029 14852

Normally when the screen is blank and the power indicator is blinking, it means the TV is in the shutdown mode to protect itself. Try unplugging it for several minutes. This will give the system time to cool down and also reset itself. While it is unplugged make sure there is nothing blocking the vents and clear them of dust and debris. Use a non-abrasive cloth. (You can dampen the cloth with water, but do not use any chemical cleaners.) You can also use a can of compressed air made for electronics to help clear the vents.  If this doesn't clear up the problem, then what you read about the SU and/or SD board is most likely the issue. The number of times the power indicator light blinks in a sequence identifies for the technician what parts to test. I have included the chart for you. Because of the high voltage parts in the TV, unless you have done this type of repair before, I recommend having a technician diagnose and complete the repair. If You Need An Expert 6ya.com Best, Donald Deane MCSE,ASE,CPO

If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/