20 Most Recent
Panasonic PT-50LC13 50" Rear Projection HDTV - Page 4 Questions & Answers
How do i remove the black box on my screen
don't have the original remote control, I used the time warner control, I just reprogramed to control my tv without the cable box, I put the volume all the way up in the tv, then down to zero, and at the same time I hold the 0 key in the remote control, after that the screen said lamp has been reset to zero, I repeated this step because a lamp red light stayed on, after this only the power green light only stays, when installing the new lamp make sure is all the way in, you can use the white out to mark exactly where you have to push or put in the new lamp, it may not been all the way in, hope this help someone !!
2/20/2012 1:24:24 AM •
Panasonic...
•
Answered
on Feb 20, 2012
Light engine
hi there sorry for the late post i am actually new to here so thats why this is such a late response i too have this same problem this specific unit has 3 air filters in it all located on the projection unit which needs to be removed to remove the projection unit you first mus take the back panel off then remove the ballast cba next you ned to remove the tv/tuner unit and finally the projection unit can be removed its over on the right you will notice it very easily there is a rather large fan connected to it and once youve got that out carefully clean the 3 filters on the unit replace and you should be good to go this is coming directly from a service manual if any one needs the manual go ahead and pm me and i will get you the manual
2/13/2012 6:54:15 PM •
Panasonic...
•
Answered
on Feb 13, 2012
I replace lamp on PT 50LC13 50 and still no picture or sound...could it be the ballst
HelloIt is a common fault to this model that ist ballast may get damaged,. Just replace it. If you stll do not get the problem rectified, inform me. I've its service manual [not user manual] in which all repair work has been explained with illustrations. All adjustments should be done, disassembling and reaseembleing etc. Byt I can't send that document diret to you by this site, as this Fixya new site does not allow any PDF files to upload by it. You have to buy one amoung my services advertised in Fixya site. You can also come to me and purchase my service, bt typing my nick name "gopakumarg43" on Google search box, and clik on 'Gopakumarg43-fixya' there. You can access my services publshed there by Fixya, and can select the apprpriate. When you purchase it, Fixya will give alert, and one link between us, through which we can communicate each other till yourTVs problem has been rectified. OK.
11/11/2011 2:27:09 PM •
Panasonic...
•
Answered
on Nov 11, 2011
My panasonic TV has sound but no picture
same problem here mine is not a plasma just normal tv was working all fine turned it off came back in an hour turned it on just black screen all channels work with all sound
11/11/2011 4:05:11 AM •
Panasonic...
•
Answered
on Nov 11, 2011
My panasonic power ligth blinks green every second
There's is ballast kit for this TV I fixed too many of these.Be very carefull! not to damage a very fragile flat cable when you try pulling the Boards or Chassis. This cable is on the left hand side of the light engine. The ballast kit part# is LSUC0022.You may wana hire a TV tech if you are not an Electronic technician.Best of luck
www.aaatvservice.com
11/3/2011 12:18:01 PM •
Panasonic...
•
Answered
on Nov 03, 2011
Panasonic PT-50LC13 50 in. Rear Projection HDTV
Turn on the
television after the new DLP bulb and housing are inserted into the chassis.
2
Move close enough to the set to
reach it easily. Hold the "VOL" button on the front of the television,
while holding the "SPLIT" button down on the remote. Do this for 5
seconds. Note that some models require holding the "PIP" button on the
remote in lieu of the "SPLIT" key. Verify which model is relevant prior
to beginning the process.
3
Verify that the reset took by waiting for a message to appear on-screen indicating a successful reset. Additionally, the "LAMP" indicator on the front of the television will go out.
10/16/2011 7:59:05 PM •
Panasonic...
•
Answered
on Oct 16, 2011
MY PT 56WX33G TV WILL
Hello
Repeated 5 blinks indicates there is a short circuit with either with its 140VDC power supply line, or the absence of 140VDC itself from the main power regulator board. You must have an excellent knoledge in electronics to work with this fault. If you have, just measure the 140VDC power supply form the main power regulator board. Just measure it with a Hi_Quality Digial multimeter. Never use an analoge multimeter for this purpose as, it may make harm to other internal circuits of your tV. If this voltage is found abnormal, [2% error is accepatable], that is, this voltage must be within 138 to 142VDC. A very skilled job indeed. If you ar enot sure with, get this TV repaired, either by any well experienced seevice techinican, or by the authorisied service center for Panasonic at your town. Never play with the circuit boards of this set without proper knoledge in electronics. It will make things worse. OK.
9/10/2011 8:20:57 PM •
Panasonic...
•
Answered
on Sep 10, 2011
Now when I turn on
Hi,
Flashes of the LED light at the front panel for every 5 secs. has a corresponding error code. Please let me know the status of them (Power, Temp, Lamp LED light) how many times they will blink and its color to determine where the fault came from and assist you further.
Jdvillanueva
8/31/2011 1:06:11 AM •
Panasonic...
•
Answered
on Aug 31, 2011
Hello.
My Panasonic PT-50LC13 is not
Check ur tv fan,if ur cooling fan are runnig,before all these LED lights are flashing.If not that ur tv problems.All these LED lights are flashing the tv making alots of clinking noises too like it trying turn itself on?Yes,than the tv board that called the Ballast board it is dead too,must be replace also.This tv Ballast board only job are to help to ignite the tv projection lamp only and keeping it on and running.
8/29/2011 1:13:16 PM •
Panasonic...
•
Answered
on Aug 29, 2011
I have a sony and
so this is a projector , if the unit is turning off and giving led signal error like green flashing,
your bulb needs a replacement. its a warning that it has nearly end of his lamp life.
dust and poor ventilation can shorten the lamp life.
its a good idea to clean the blower and ventilation inside the projector.
8/29/2011 12:59:52 AM •
Panasonic...
•
Answered
on Aug 29, 2011
After being on for several hours (5-6hrs.) my TV
Hi,
Please let me know what is the status of the LED light at the front panel (Power, Temp, Lamp) after the shutdown. If an error is detected it will flash the no. of error code for every 5 secs. It will help to narrow down the symptoms.
Also, clean the vent(keep away all obstruction) from dust build up to have a sufficient air flow inside the unit. Excessive heat will produced a subsequent shutdown.
Jdvillanueva
7/31/2011 12:58:24 AM •
Panasonic...
•
Answered
on Jul 31, 2011
The lamp light is blinking once every 5 seconds.
HI,
Panasonic PT50LC13 lamp indicator blinks to tell you the lamp is faulty.
You need to replace the bulb or TY-LA1000 lamp assembly. This link displays all
Panasonic TV Lamps and TV Bulbs. This page shows Panasonic lamp location and
How to Replace TYLA1000 bulb. TY-LA1000 Bulb Replacement requires the use of a long Philips Screwdriver to reach screws within the lamp cage.
Unplug AC power before removing the lamp and re-install all doors, etc, correctly before starting the TV. Vacuum any visible dust or lint from air vents and lamp area. Do not used forced air to blow out dust, big problems may result.
The user's manual has a description of what the Blinking LED indicators mean.
Image of TYLA1000 lamp.
Robert
6/17/2011 1:09:53 AM •
Panasonic...
•
Answered
on Jun 17, 2011
Yellow tint picture is yellow
That indicates your color wheel or optical block is bad. Repairs are usually pretty costly. Around 1100 to 1300 dollars. Hope this helps.
5/31/2011 10:27:42 PM •
Panasonic...
•
Answered
on May 31, 2011
Not finding what you are looking for?