20 Most Recent Briggs & Stratton Prosumer 2800 PSI (Gas - Cold Water) Pressure Washer - 20324 - Page 4 Questions & Answers


Try PartsTreeRepairClinic they may be able to help

Briggs &... | Answered on Jun 25, 2018


you have to pry out that retainer ring and use a socket that fits to reinstall a new one. presses on the carb

Briggs &... | Answered on Jun 24, 2018


Go to manufacturer website, yard man or mtd, many will let you download manual.

Briggs &... | Answered on Jun 15, 2018


You might have to replace the belt if it is stretched

Briggs &... | Answered on Jun 07, 2018


is it a bowl style carb and you cleaned it is it a diaphram style and you replaced the diaphram ?the older 5hp briggs engines would run fine if you started it with carb cleaner some leaked head gaskets and could create enough vac to draw in the fuel

Briggs &... | Answered on Jun 04, 2018


check for power to the clutch if yes the clutch could be bad or a wire going to it if no power check the safety switches

Briggs &... | Answered on Jun 04, 2018


Find Your Operator Manual Briggs Stratton Go here to get the maintenance manual for your engine.

Briggs &... | Answered on May 31, 2018


you posted and engine to computers
i moved you to briggs.

tour?
lighting ?
why not tell folks first what you have,
then a goal.
and question.

posted 2 times,
tour is torque,
and lighting was, pattern,
and staging matters too.

3 things, or it will fail.

Briggs &... | Answered on May 18, 2018


Hello,
My name is Dane and I am going to help you solve your problem.
Too set the gap for the coil get a regular buisness card and use it as a feeler gauge. Loosen the bolts to the coil. Rotate the flywheel so the magnets are next to the coil. Slide the buisness card in between the coil and the flywheel magnets and make sure the coil is tight against the card.
Now tighten down your coil bolts and remove the busisness card. Turn the flywheel at least 1 complete turn and make sure it doesn't hit the coil. You're done!!!
Well, I hope I've helped. If you found this information useful, please leave me some THUMBS UP if you think I'm deserving! :-) Thank you! Dane

Briggs &... | Answered on May 14, 2018


Try sears Parts Direct .com if they cannot try PartsTreeReairClnic

Briggs &... | Answered on Apr 19, 2018


PartsTreeRepairClinicx will have a video

Briggs &... | Answered on Apr 11, 2018


that is normal you dont reve the motor on the car before putting it in gear

Briggs &... | Answered on Apr 06, 2018


There should be a single wire that runs from the voltage regulator to the ignition switch. There are usually two more wires on this regulator that run under flywheel to the alternator coil. Use this Wie as the input or + on guage. Then make a wire to connect the other guage terminal to the Ign. Switch.

Briggs &... | Answered on Apr 04, 2018

Not finding what you are looking for?
Briggs & Stratton Prosumer 2800 PSI (Gas - Cold Water) Pressure Washer - 20324 Logo

2 questions posted

Ask a Question

Usually answered in minutes!

Top Briggs & Stratton Garden Experts

John Trevino

Level 3 Expert

1407 Answers

wadingriver
wadingriver

Level 3 Expert

2223 Answers

JOHN LAPIER

Level 3 Expert

2591 Answers

Are you a Briggs & Stratton Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Briggs & Stratton Garden

  • Briggs & Stratton Garden

Most Popular Question

when adding sae 30 oil new pw add

  • Garden
Loading...