Rio Sport S30S MP3 Player - Answered Questions & Fixed issues

yes I have ario sport s30s player but I don't have the software

use mu torrent software to download music from torrents site

Please get the driver here : www.rioaudio.com/support/rio/
www.driverskit.com/MP3/Rio.html

Best regards, Jay

You can download the software from this link for this unit....

http://www.digitalnetworksna.com/support/rio/product.asp?prodID=75

anyoneee answersss???

I think the reason is is because the song is in the wrong format where did you get the song from was it the same place you usually get songs from and did you change the format by accident this could be the only problem that you're having

Your answer is in this link. https://www.youtube.com/results?q=chapter+68+carnival+rio+pearl%27s+peril

ty holding in the play button see if it turns off hope that works

google digitalnetworksna and find their site click in help and support and see if their is a manual available for download

I would like to change the batteries but how can I get access to them?

Ensure it is charged or it may be faulty and need service.

so what? be specific in posting ur problems dear

The drivers can be found at the following website, although I'm not sure that your particular Rio is Mac-compatible:
http://www.digitalnetworksna.com/rioaudio/default.asp?cat=35

-Tha Mp3 Doctor

Are you using the charging cables that came with it? That is a type C. Are you securely attaching the charging cable? A loose connection would keep the battery from charging. If you had a low battery, you would see a red light. That you have no light at all suggests there is no charge left in the battery. I'm not sure the reset will work with no charge which is why you ought to check the cables first. But turn it off and then hold down the Multifunction button for 10 seconds to reset it. Then turn it back on and see what happens. If you can, test the charging cable on aother device. If you have another type C charging cable, try it, just to eliminate a bad cable. If these suggestions don't work, you may try the manufacturer's customer support.

The F2100 remote is not explicitly listed as compatible with the AerialBox T2100, I recommend using the remote that came with your AerialBox T2100 for optimal functionality. If you have any specific compatibility concerns, I suggest reaching out to Dish TV customer support for further assistance.

Probably nowhere as this is an Amazon / eBay special so made in China. You should be able to go to Windows Settings, - Hardware and tell Winderz to find a compatible driver. https://www.google.com/search?q=VIBE+SOUND+USB+Turntable+Model+VS-2001-USBT+drivers ..

Set Time Hours and Minutes: Press Time/12/24 and Alarm1/ON/OFF buttons at the same time for two seconds and it will start to blink the hour. Press and hold the button for a fast setting or tap it briefly to increase the setting by one hour. Now set the minutes with time (press and hold) and min. How do I set the Audiosonic clock? Set current time Press and hold the time button and simultaneously press the hour to set the hours in 24-hour mode .

Questions edited for clarity, full 'make model (what it is)'.Spray the buttons with Electrical Switch Cleaning Fluid Spray. It is an old unit and the contacts are probably dry.https://www.google.com/search?q=CR-06PL..

Question edited for full 'make model (what it is)'. Unfortunately only this one https://www.mikesmanuals.com/Manuals_Details_3257.htm https://www.google.com/search?q=technics+sa-r430+manual ..