20 Most Recent Apple Ipod Touch 4g - Page 8 Questions & Answers

Press and hold the Home button. Siri is enabled by default on all devices that support it, so usually you can just press and hold the Home button to start the Siri interface. The Siri prompt will appear, and you'll be able to speak your command or question.[1]

• If Siri doesn't start, it may be disabled or your iOS device may be too old

Say "Hey Siri" if your iOS device is plugged into a power outlet. When your iOs device is plugged in, you can say "Hey Siri" to launch the Siri interface without pushing any buttons.

• The iPhone 6s, iPhone 6s Plus, iPhone SE, and iPad Pro allow you to use "Hey Siri" without the device being plugged in.
• If "Hey Siri" isn't working, it may need to be turned on.

Ensure your iOS device is compatible. Siri does not work on older iOS devices. The iPhone 3GS, iPhone 4, iPad, iPad 2, and the iPod Touch 1st-4th generation do not support Siri. Even though these devices may be able to install a version of iOS that supports Siri, they won't be able to use it.

• Visit support.apple.com/en-us/HT201296 for information on identifying your iPhone if you're not sure.
• See Determine an iPad Model / Version for information on determining what model iPad you have.

I hope this response helps you out. I wish you the very best of luck! If I can help you further, please let me know. I'm available for longer billable discussions at https://www.6ya.com/jim_8a00509cb5f5d7e2 If I've assisted you, I'd greatly appreciate you taking the time to provide me with a favorable rating. Thanks so much!

I found a bitmoji creator app that you can use on your iPhone. Check out https://www.bitmoji.com/. Once created, if you go to check out this article on transferring a bitmoji from you to them - https://support.bitmoji.com/en-US/article/sending-bitmojis

Yes I believe so.

You likely updated your iPhone to iOS 12 recently, which is when the problem started. My research indicates that a newer version of Google maps that supports iOS 12 and Carplay was released which you may not have. Delete the Google maps app on your phone. Then go to the App store and install it again. Now connect to your vehicle and see if the problem is solved.

There should be many resaons behind this cause, because we don't know the history of the device. For example, it may have been water damaged in the past, or suffered various falls and impacts. It may also have been repaired. So i suggest you to visit the near by authorized Apple Repair Center to get it fixed. If you are able to fix it by the repair kit at your home then it will be also the second best option.

Sometimes the services change their setup. The current setup for AOL to support IMAP is: Incoming mail server (IMAP): imap.aol.com Outgoing mail server (SMTP): smtp.aol.com Make sure port settings are: IMAP-993-SSL SMTP-465-SSL

Does UConnect show up as an available item to connect to via your Bluetooth menu? Steps to follow: Step 1: Complete the following steps on the system:

1. First, press the 'Phone' icon on the Uconnect Touch Screen.
2. Press 'Yes'

Step 2: Complete the following steps in the phone:

1. Next, go to your phone's 'Settings' or 'Options' under Bluetooth to search for wireless networks.
2. Select 'Uconnect' as the paired device.
3. When prompted on the phone, enter the 4-digit PIN number shown on the Uconnect Touch Screen and accept.

Step 3: Complete the following steps on the system:

1. Once paired, you can set your phone as the favorite by pressing 'Yes.'
2. Your phone is now paired and ready for hands-free calling.
3. Press the Uconnect Phone button on your steering wheel to begin.

Facebook Messenger is just called "Messenger" in the Apple app store. Try looking for it that way and you should find it.

When you have Apple send a code to you, it is sent to a known, registered device that's attached to that Apple account. If it isn't showing up, is there another Apple device that was previously setup on that Apple account? That's likely where it's going. To find out which devices are setup on this Apple account, go to a computer and go to http://icloud.apple.com. Log in with the Apple username/password associated with your Apple ID account. When you get in, you'll see a screen that looks like an iPhone. Click Settings. When that app launches, you'll see a section called 'My Devices'. This will show you all the devices that are associated with that account. If you click on a device that you don't own any longer, you'll see a box for 'Lost, Sold or gave away the device'. Follow that link to remove old devices from your Apple account. This should resolve the problem and allow you to get access to the code.

You may either call (800) 692-7753, go to http://support.apple.com and chat with a support rep, or your third option is to pop into an Apple store near you (https://www.apple.com/retail/).

The AT&T store should be able to reset your voicemail box which should resolve the problem. I would also strongly encourage you to update the operating system on your device. Having an older operating system can make weird issues pop up. To do this, go to SETTINGS->GENERAL->SOFTWARE UPDATE, and install any pending operating system updates.

The app store icon is part of the Apple operating system on your iPad. The icon for it cannot be deleted from the device. It's there somewhere!

Apple ID is a service used by Apple to authenticate or sign in an iPhone, iPad, or Mac.

How To Change Your Apple ID Email Address

1. Go to appleid.apple.com, click Manage Your Apple ID, and sign in with your Apple ID.
2. Click edit to the right of your email address under the section called Apple ID and Primary Email Address.
3. Enter your new Apple ID email address.
4. Click Save. This is safe. I've chamged mine this way a couple of times.

If you have access to your apple ID. Open settings and select change password option. Enter your current password and in next tab to it enter new password. Press update password button below to it.

Either you have to open it using apple ID and password or you can create an account to register your self on application if it says apple ID already exists then click on reset password for app only

Look under your saved passwords or go to. Late date that you have backed up to your computer and it will be in the history

You cant unlock it unless you have the password. If you forgot the password you cant do it. Contact Apple.

Go to settings. Click on your name at top. Click on security and pssswords. Then click change password

Hold power for 12 secs while plugged into usb power
Also apple store