20 Most Recent Sony FD Trinitron WEGA KV-32HS510 32" TV - Page 9 Questions & Answers

1. Check your TV's audio settings: If you're experiencing audio issues with your Sony TV, the first thing you should do is check the audio settings. Make sure that the TV is set to output audio to the correct source. For example, if you're using an HDMI cable to connect to a sound bar, make sure that the TV is set to output audio to the sound bar. If you're using a receiver, make sure that the TV is set to output audio to the receiver. 2. Try a different HDMI cable: If you're using an HDMI cable to connect your TV to a sound bar or receiver, try using a different HDMI cable. Sometimes, the cable can be the issue. 3. Check your sound bar's audio settings: If you're using a sound bar, make sure that the sound bar is set to the correct audio input. For example, if you're using an HDMI cable to connect the TV to the sound bar, make sure that the sound bar is set to the HDMI input. 4. Check your receiver's audio settings: If you're using a receiver, make sure that the receiver is set to the correct audio input. For example, if you're using an HDMI cable to connect the TV to the receiver, make sure that the receiver is set to the HDMI input. 5. Try a different audio input: If you're using an HDMI cable to connect your TV to a sound bar or receiver, try using a different audio input. For example, if you're using an HDMI cable to connect the TV to the sound bar, try connecting the TV to the receiver using an optical cable. 6. Restart your TV: If you're still experiencing audio issues, try restarting your TV. Sometimes, this can fix the issue.

https://www.servicemanuals.net/en/sony-service-manuals

The 7 blinks on your TV is letting you know then that there is an error with the temperature of your TV or the sensor is not working or your TV is overheating. Or there is is an issue with the KD board or the GD board or an audio error.

It might now of have stopped working on you guys and is no longer working anymore too and someone had sold you a bad playstation portable unit.Or you can buy another one from a reputable places like JJ games and DKOldies and East Starland games.

Hi, please schedule a home appointment with geeksquad/bestbuy in order to help replace your tv ports. You might also call Sony to see if they can recommend any vendors for the repair. Thank you.

Reset your TV to factory settings or change the sources and check the video cables or the software needs to be updated or there could be a problem with the TV screen it's self and the LCD.

Hi, it sounds like you need to use the rewind option first to rewind the tape. If the tape isn't rewound, then you're unable to play it. And this might cause the eject issue that you're experiencing as well. Thank you.

Possible TCon board issue but check Pico fuse on Power Supply. Fuse is located near top left closer to connector plug . Fuse is marked as L7. If faulty, replace ONLY with the correct value and type of fuse.

Hi, please attempt a factory reset of your tv according steps provided in it's manual. If the factory reset does not work, please attempt to swap out the power cable of the tv if possible. If all else fails, you might need to send the tv to Geeksquad/bestbuy or Sony in order for repairs to be done. Thank you.

The closest 2 are in the link Sony TRINITRON KV-27S42 Service Manual https://www.google.com/search?q=sony+trinitron+kv-27ds2+service+manual ..

https://www.google.com/search?q=ccess+the+service+menu+on+a+sony+trinitron+KV-27DS2+crt+tv ..

Hi,When a TV is stuck in standby mode often means that there is a problem with its power supply or even in the horizontal output circuitry. May be a component with short-circuit in the RGB output driven by the flyback transformer or a rectifier diode in the power supply output.I hope having helped you.Sully

If you remove the back and look in the various openings to the panel can you see normal backlights?

Your Sony tv must support Wi-Fi. Include the model number of tv

Not all television will support Wi-Fi. You need the model number of the tv to find out.

VCRs have the code preset and aren't changeable. If you got a Universal type remote, it may be incompatible with Sony. https://www.amazon.com/SONY-RMTV266A-VCR-REMOTE-CONTROL/dp/B00U0J18UC ..

HDCP 2.2 wasn't released until 2014. The LG 55G2 was released in 2012. There's no way to upgrade the TV, unless you replace it. Using a splitter probably wouldn't help. The device sending the HDCP check needs every part of the HDMI cable daisy-chain system to send back a "Yes I understand" message in 20ms. Since a receiver isn't usually sending copy-protected video, this message is coming from one of the devices. Reset the resolution for that device to 1080p. Based on your description of the problem, you need to change the video output on the cable box. This depends on the cable box model and the guide it uses. However, either turn off the receiver with the cable box and TV left on. Alternatively, connect the cable box to the TV directly. For some, you then press Menu (for the cable box) twice to get to general settings. Then enter the audio/video section and look for the video output formats. See https://www.spectrum.net/support/tv/hdtv-picture-formats for some of the reset steps. In some cases, you may need to use a different video output to the TV to get a picture, instead of the error message, to access the menu at all. On my set-top box, I sometimes connect the RF output to the RF on the TV when the set-top box sends a "out of range" signal. I set the TV to channel 3 (in my case) and then reset the video format. Other times, I just get the blank screen but the menu still works to reset the output format. I hope this helps. Cindy Wells

DVCAM tape. The 360 has the physical dimensions to take long-format DVCAM tapes for loads up to 184 minutes.

I am guessing that your DVD player could be broken and the laser part that reads the disc's is also not working too and the disc drive is also broken. The disc drive and everything that is attached to the disc drive needs to be replaced all together.