20 Most Recent Sony TC WE435 Stereo Dual Cassette Deck Single Dual Cassette Deck - Page 7 Questions & Answers

Hi, yes the power button should be in the top-left corner of the device. It should be above a green button. Thank you.

Hi, Please double check that you're using multiple cables from your blu ray and not just one. A coax cable can connect your bluray player to your amp and then another cable from hdmi output can connect to your projector. If you need more help in figuring out exact cable types and detailed home-theatre setup guide, you can reach out to dolby as well by calling 415-558-0200. They do home theatre setup as well. Thank you.

There are video's on YouTube about how to replace the belt for your Sony cassette player.Ebay and Amazon have replacement parts too.

Were these discs labeled CD-R Digital Audio? This compact disc recorder can't record to CD-R data disc for computers. See the manual on page 7. The manual is available here: https://www.sony.com/electronics/support/res/manuals/4246/42460761M.pdf . Apparently, there is a header section on CD-R Digital Audio discs that tells the RCD-W100 that the disc is for audio recording. The work-around would be to process your audio files on a computer and then write the music to the CDs that you currently have. I wish that I had better news for you. Cindy Wells

Hi, please shutoff your home theatre system for 5 to 10 minutes and double check that you've not plugged any of it's cords into incorrect jacks. You can then power on and check the device's buttons again. Thank you.

https://www.google.com/search?client=opera&q=1%2F4?+Stereo+Male+to+3.5mm+Stereo+Female+Adapter&sourceid=opera&ie=UTF-8&oe=UTF-8 https://www.lifewire.com/sony-str-dh190-review-5077349 https://www.computerhope.com/jargon/m/mini-plug.htm

The laser may need to be replaced and there is a problem with the laser also.Or the Laser needs to be readjusted.

https://www.youtube.com/watch?v=o2xde3MfHWc

You may be lucky and after resoldering the main output section, it might spring back to life.

https://diagramasde.com/blog/102776/hcd-n555av-pdf-hcd-n555av-pdf.html

On your systems remote control press the tuner and the band buttons to choose either am or fm and then press tune button to pick which station you want and press the memory buttons and press the preset button and then press enter.

You can get it from Microsoft

Check out the video and articles. https://www.google.com/search?q=Japanese+to+English+on+a+Sony+NW-a55+A ..

Same issue. Anyo help?

Hi, Please shutdown your device, remove all the wires connected to the sony device and then turn the device back on again. Watch to see if the issue occurs again. And if not, please add all of your wires back. Thank you.

tell all things connected, and did not(in detail or photos) what are you plugging in.(all) I can buy endless speaker systems and no 2 are the same. no speakers told, (hardwired, amplified, or what?,) bad speakers, or bad RCA cables. bad RCA output jacks on rear of g88 (preamps bad) or PC end failing, if I knew all you had there all makes and models and connections exact told , I can in fact tell you tests to do.

Does this happen on Turntable or on the other components ? Turntable should have a seperate grounding wire that should be connected to receivers grounding screw on back side.
If the problem not the turntable but other component i.e;DVD,CD or cassette ,please check your stereo cables that one of them-even one channel, L or R - could be broken/damaged and should be replaced..MAke sure to replace one by one to localize the broken cable..good luck...

SELECTED PRODUCT: (change your search) How to disable the demonstration (DEMO) mode. Article ID: 42707 ' Last Updated: 03/11/2014 Sony® stereo systems will enter the DEMO mode the first time you power on the system or if you do not operate the unit shortly after turning on the power to the system. To disable the DEMO mode, while the stereo system is powered off, press the DISPLAY button repeatedly until the demonstration display disappears. NOTES:

• Depending on your model, some units have a DEMO button that is used to disable the demonstration mode. If your unit has this button, with the power to the system off, press the DEMO button until the display disappears.
• If applicable to your unit, setting the clock on your stereo system will also disable the DEMO mode.
• Using the buttons on a supplied remote control will not disable the demonstration mode.

If model-specific information is needed to complete any of these steps, refer to the operating instructions supplied with the product. Manuals, Specifications and Warranty information for your Sony product is available online.

Question edited for clarity. Do you really think 'tryna' is a word? Here is the remote for your Sony (no programming) https://www.google.com/search?q=dav-hdx285+replacement+remote This is why we don't by Universal Remotes in 2022. https://www.fixya.com/support/r29872378-universal_remotes_no_facsimile_remote All the Sony codes are here https://www.directutor.com/content/sony-universal-remote-codes Sony Device Remotes Codes Programmable Remote Code Number DVD AV System 51622, 51558, 51658, 51858 DVD Changers DVD Player DVD/HDD Combo Player

Troubleshooting for 'No Sound', but you probably need a Sony Service Centre. https://www.google.com/search?q=Sony+STR-DE497.+Has+no+sound ..