Top 20 Sylvania SRT2319 TV Questions & Answers

http://www.remotecodelist.com/

Refer its user manual for details. http://electronicshelponline.blogspot.com/

A remote control is a must to proceed.

2327 2304 2314. These are the codes to check. If you wish to get more, http://remotesearch.blogspot.com/ http://electrohelponline.blogspot.com/

0062 0004 0009 0135 0189 0183 0227 0456 0008 0068 0075 0141 0161

Your TV has bad solder connections at the set's verical output integrated circuit. It's very common for these connections to go bad because of heat from the part. When the technician moved the set around to hook up your new box, it may have jarred the connections enough to finally cause the existing problem to become more obvious, but he didn't cause the problem. Your set would probably be doing this anyway before long. The good news is that it's just a simple fix. Resoldering the connections should restore normal operation.

Hello
Three digit universal remote codes for Sylvania TV are:
004/ 008/ 009/ 062/ 068/ 069/ 074/ 075/ 076/ 077/ 133/ 161/ 163
Four digit universal remote codes for Sylvania TV are:
0062 0004 0009 0135 0189 0183 0227 0456 0008 0068 0075 0141 0161 Direct Code Entry

1. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
2. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks, then stays lit.
3. Enter the 4 digit code from the code tables. Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes.
4. With your device on, press CHANNEL UP. If the device responds, no further programming is required. Note: If some buttons do not operate your device, try one of the other codes for your brand

If you are able to access the internet, I would suggest try getting your question answered by searching online. Several sources have answers to your question. They may not be the solution, but worth a try. Who knows, one of them just might work. Most of the time, it just takes a little patience and plenty of persistence. Be willing to spend some time searching. You might start by typing into the search box exactly what you're looking for. Good Luck!

What device do I need to receive network TV without cable connection?

get a RF modulator if the tv does not have rca connectors. get it at radio shack or wal-mart

0171

Hi,

Buy the remote from :-

http://www.electronicadventure.us/Merchant2/merchant.mv?screen=prod&store_code=EA&product_code=N0139UD

Good Luck!!

Thanks!!

if you have the silver comcast remote with the red button in the middle, then try pressing tv then hold setup until it blinks, then hit 993. it will blink again, then hit channel up until your tv shuts of. when it does hit setup to save

may be your tv systems don't have an accessory for audio video input. but you can hookup that by using an RF modulator adapter, this is a converter from audio / video to RF signal and connected directly to your antenna connection. you can purchase that RF modulator adapter to an electronics store. 

Hi there,

Well please follow the below link to get the manual -

http://tv.manualsonline.com/manuals/mfg/osram_sylvania/srt4127p.html


Good Luck!!

hi! i have here a couple of codes for your sylvania tv, just try them, 1004, 1007, 1018, 1027, 1047, 1056, 1057, 1059, 1060, 1061, 1103, 1124, 1145, 1150, 1153, 1279, 1296, 1387, 1464, 1483, hope this helps!!! goodluck!!!

As long as the TV has an "input" button on the TV itself, yes press it repeatedly until you get to the input you want.
You may also try this : www.remotes.com or 1(800)REMOTES and get you the correct remote for your TV. Have your TV model number and brand ready.
Good luck !

112, 113, 117, 119, 127, 128, and 139.If this works give me a positive vote please.

Try one of these, 010,036,041,044,058,059,060,061,063,096,111,157,163,213. ..hope this helps..

Have you tried a manual?