Sylvania 6419TA 19" TV - Answered Questions & Fixed issues

0296,0280,0275. Try these codes. If you wish to get more details; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. Common set-up codes to check with TVs and other devices are given, in the order of the "device's brand name list" in alphabetical order. Pull up older posts. Surf the site with patience. Surf the sites by type in the brand name to your set, in its search box. http://electro-medical.blogspot.com/ http://remotesearch.blogspot.com/ http://electrohelponline.blogspot.com/

Without a remote

Its a 19 inch set which means:1 If a single speaker put ear to set to see if any sound or a low hum can be heard from it at all.2 If set has a headphone jack on it see if sound there3 If above fail either the speaker/s are bad or you have a audio circuit problem which on a set of this size is not cost effective to repair------------buy a new set.

All the other channels might have been skipped by the remote control. Without remote control, it will be impossible to retrieve them.

you can use with RF converter .

Answer #1: You can get up out of your chair walk over to your TV & VCR player and Turn it ON then Insert a VCR Tape then Turn on the TV,Hit the Play Buttonon your VCR Then go back and set in your Chair AND ENJOY the Movie.When the Movie is Finished You do the same thing all over again Except in Reverse. I do this every time I want to watch a Movie. Answer #2:Youcan go to the Electronics Store and Purchase A VCR Or DVD Player that Does Have a Remote or Just Buy a Universal Remote for about $10.00 it has all the codes for all TV's, VCR & DVD Players in the Package. I sure hope that one of these Answers is of some Help. Good Luck!

yes u can go to the menus and go to input then game mode

Hi,
Required power supply board is available in shopjimmy.com
Info have been provided you in live chat session.
Thanks.

Is the wii working? Sometimes the wii if shut down abrupetly will shut itself off to protect it. Unplug your wii for about 30 seconds then try again.

I am not sure but i do know this. You need to have a professional person like a friend or cable man who knows this stuff. Or go to this site:
http://xbox360.ign.com/articles/663/663050p2.html
It has your answer i believe, just read carefully, as you would if you wanted to download porn or something.
hope i helped :)

Video circuit problem.

Check whether you get a filament glow in the picture tube neck. It will be faint. If OK,

Just place your hand near the front of your screen, when TV is on. If EHT is generated you will feel the static effect on face plate on the glass. Your hairs will drawn towards the picture tube. No EHT, no such effect will be there. Refer trouble shooting procedures.

Hi,
you can purchase it from--
http://www.google.com/products?hl=en&client=opera&rls=en&hs=lVo&q=purchase++diode&um=1&ie=UTF-8&ei=tMrHSf61BIGMkAWf0unNDA&sa=X&oi=product_result_group&resnum=4&ct=title

try the codes for the sylvania vcr

Usually AV in via the external connections - probably RCA black and red - stereo sound in left and right. and yellow for composite video in - for the USA, In the UK and europe we use a combined connector called scart. Hope this is useful - please rate accordingly.

deight, your set is going into total vertical collapse, either the vertical IC is failing or some support component to the vertical circuit is failing, should not be an expensive repair, hope this helps, BMW Rider

No, because screen casting wasn't invented and it isn't a Smart television. Time for a new one.

Here are some troubleshooting tips to try. However, as it is an older set, if these tips fail, the cost of a repair at a shop might exceed the value of the TV. In short, a new TV may be in the works. Cross your fingers. One of these tips may work. Let's troubleshoot the issue and try to get it working: If you are using a remote, check the batteries in it. If you are using several remotes with it, try the alternative remote. Sometimes there is a glitch affecting the remote for a Roku where it won't turn on the TV other than a powered black screen and you have to use the other remote to turn it off and back on and then the Roku screen pops up. I have not sorted out why. Check Power Cord and Connections: First, ensure that the power cord is securely plugged into both the TV and the electrical outlet. If you suspect a faulty power cord, consider trying a different one. Reset the TV: While most Sylvania TVs don't have a dedicated reset button, you can perform a manual reset: Unplug the TV's AC adapter from the electrical socket. Press and hold the Power button on the TV for 20 seconds. Plug the AC adapter back in and turn on the TV. Check Audio/Video Cables: Inspect the audio/video cables connecting your TV to the satellite or cable receiver. Ensure that the color-coded prongs match their respective connecting points. Correct any mismatches (e.g., white cable into a red port) by reorganizing the prongs. Inspect Coaxial Cable: Look for the coaxial cable on the rear side of the receiver, attached to the port labeled as ANT IN. Confirm that the connection is firm; a loose coaxial connection can cause display issues. Tighten the cable by pinching the silver band on the end and rotating it clockwise until secure. Check for Interference: If distortion continues on the TV screen, consider nearby interference. Power-hungry appliances can cause electronic interference, affecting display quality. Visit a Repair Shop: If the above steps don't resolve the issue, you may need professional help. Some technical faults, such as a blown fuse or faulty capacitor, require expertise in dismantling and soldering. If uncomfortable with such tasks, consider visiting a repair shop

1. Auto Code Search:
   • Turn on your Sylvania TV.
   • Press and hold the "Code Search" button on your Philips remote until the indicator light stays on.
   • Press the "TV" button on the remote to set it to control the TV.
   • Press the "Power" button repeatedly until the TV turns off.
   • Press the "OK" or "Enter" button to save the code.
2. Manual Code Entry:
   • Find the code for your Sylvania TV in the Philips remote control manual. If you don't have the manual, you may be able to find it on the Philips website.
   • Turn on your Sylvania TV.
   • Press and hold the "Code Search" button on the remote until the indicator light stays on.
   • Enter the code using the number buttons on the remote.
   • Test if the remote now controls your TV. If not, repeat the process with a different code.
3. Try Common Codes:
   • Some common Sylvania TV remote codes for Philips remotes are 0810, 1684, 1886, 2183, 1081, 1172, 1196, and 2049. Try entering these codes manually.

it is a very simple TV, is TV connected to cable? Here is link to manual copy and past download and save for future reference. It is very old and has CRT not LCD. https://www.manualslib.com/manual/776815/Sylvania-Sylvania-Ssc092.html#manual

More likely you hit the Source / Input button and lost the signal. Press it again until it comes back.