Sylvania SST4322 32" TV - Answered Questions & Fixed issues

I don't think video 1 is the right input for S-Video. Try different input settings on the TV setup menu, in fact try them all one by one till you get a picture. If you can't get a picture check the lead.

If you wish to get more details; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. Common codes to check devices with different brand TVs are given, in the order of the device's brand name list in alphabetical order. Pull up older posts. Surf the site with patience. http://electro-medical.blogspot.com/ http://remotesearch.blogspot.com/ http://electrohelponline.blogspot.com/

What is the brand name of the remote control you have? If you wish to get more, try the following links. Both the sites linked have set-up code list & set-up procedure to many popular brand remote controls. http://electrohelponline.blogspot.com/ http://electro-medical.blogspot.com/

Second sale cost for a TV will depend on its mode., condition and so many other matters. Can't predict.

See specifications for this set---it does not have a digital tuner and is not digital in that sense.http://reviews.cnet.com/direct-view-tvs-crt/sylvania-sst4322-32-crt/4507-6481_7-31140736.html

It would help to have either a photo of the screen which can be posted here or a description of what it says?

Try a cheap universal remote you can pick them up for around $10 au.

As far as fixing goes, you might as well get a new TV... Unless its a LARGE EXPENSIVE HOLY $%^# TV, It will cost more to fix, than to just buy a new one, unless its under warranty, which being an older model as that (or so im reading) It may not be covered.

Try unplugging the TV, and while unplugged, hold down the power button for a full minute (yes, with the plug NOT in the wall) after a minute, plug it back in, and try. Its a hard reset. If it still does not work, and you've tried different outlets, It's probably a repair issue, and you'll need to get someone to fix it, or just junk it :-/

Sounds like a t.v. repairman trip. Can't fix in cpu

Try going to the menu and changing it back from there! If all else fails then just keep pushing every button on the remote and im sure you will hit the right one!!!!
GOOD LUCK!!!!!!!!!!!!!!!!!!
HAPPY HOLIDAYS!!!!!!!!!!

the inverter board is bad

At 2 watts, it would run very small speakers without an amp, but I suspect you would be more happy with a home theater amp. There are a number of surprisingly inexpensive models with DVD players in the same unit. Here is an example:

http://www.overstock.com/Electronics/Coby-DVD765-Home-Theater-System/3981690/product.html

Hopes this helps:)

hi! i have here a couple of codes for your tv! just try them, 1004, 1007, 1018, 1027, 1047, 1056, 1057, 1059, 1060, 1061, 1103, 1124, 1145, 1150, 1153, 1279, 1296, 1387, 1464, 1483,1046, 1465, 1150, 2092, 1464, 2408, 1465, 2260, 1027, 2064, 3105, 1124, 2078, 3088, 1296, 2213, 3147, 1145, 3095, hope this helps!!!! goodluck!!!

It's possible that the AUX channel was erased from the display menu. Go to your CHANNEL SET menu choice and and use your DOWN CHANNEL button to see if the AUX channel will come back.

Not sure if i understand your question. S-Video is a protocol for piping video from one device type another
it is a shielded cord with a male plug at both ends.


S-Video caables are standard and can be bought from most TV stores.

Please rate my help++++Thanks for using FIXYA

http://www.manualsonline.com/

Try the codes for FUNAI

does anybody ever solve these problems? i keep looking and not a single one has a solution.

i dont knw how and dont care

How long is it unplugged for before it resets?