Sylvania 6427TE 27" TV - Answered Questions & Fixed issues


Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. One among it has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily.
http://remotesearch.blogspot.com/
http://electro-medical.blogspot.com/
http://electronicshelponline.blogspot.com/
http://electrohelponline.blogspot.com/
Search the site by type in the brand name of your device, in the "Search box at the top right of the Home page display" to see the set-up codes to your device, with different brand remote controls.
Programming Notes
• If your device does not respond to the remote after trying all codes listed or your brand is not listed in the code list, use the Auto Code Search method to program your remote.
• Sometimes the first code that "works" with your device may operate only a few functions of your device. There may be another code in the code list that performs more functions. Try other codes from the code list for more functionality.
This is a trial and error procedure; and quiet time consuming. You might have to check different codes said for your device.

Sylvania 6427TE... | Answered on Feb 02, 2016 | 66 views


Codes are stored in the (universal) remote. You can use its code search (or equivalent) feature to find a code that will enable some or all functions of your Sylvania TV. If a search through all codes stored in the remote fails, you may have to try a different universal remote. All universal remotes do not store all possible codes.

Sylvania 6427TE... | Answered on Jan 19, 2016 | 78 views


If no channels are detected by scanning, you should check for a good antenna or cable connection at the rear, then scan again.

Sylvania 6427TE... | Answered on Dec 22, 2015 | 82 views


Here are the Sylvania codes

SYLVANIA 004,008,009,062,068,069,074,075,077,155,161,163,189,198

Sylvania 6427TE... | Answered on Oct 02, 2015 | 43 views


On older tv sets there are limited inputs...one for video and one for audio..
Find the white output hole for video on the back and run the cable to the set, and as for the audio there will be 2 red output holes (left and right on your dvd/vcr combo unit) this will use a special cable you can buy at radio shack that converts the left and right to just one output(it's like a "y" looking chord. it will still work if you just use one audio chord "out" from the dvd/,vcr unit but you will be hearing only one side of the "Stereo"
plug these into the back of your old set the white is for video and the red is for audio.

Sylvania 6427TE... | Answered on Sep 15, 2014 | 108 views


Let the channel scan complete fully. This just needs to be done once for antenna channels and once if you use cable. Should take about 5 minutes to complete, but if u must interrupt or exit, press menu, or power to turn off TV. Make sure the tv's tuner setting is set appropriately for either cable or air (antenna), depending on your way of receiving channels, so it scans and finds properly.

Sylvania 6427TE... | Answered on Sep 12, 2014 | 96 views


Check the horizontal & vertical scanning section circuit. What else to do?
If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/

Sylvania 6427TE... | Answered on Aug 30, 2014 | 43 views


If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/

Sylvania 6427TE... | Answered on Aug 03, 2014 | 27 views


Check the input selection settings to TV. Refer its user manual for details.

Sylvania 6427TE... | Answered on May 08, 2014 | 91 views


0601 0166 0460 0338. Try these codes. If you wish to get more; check the site linked here. It has set-up code list & set-up procedure to many popular brand remote controls. See it in "Mosaic" or "Magazine" view. It will make surf easier.
http://electrohelponline.blogspot.com/
Try this link too
http://remotesearch.blogspot.com/

Sylvania 6427TE... | Answered on May 08, 2014 | 46 views


The vertical scan output stage to this set has the fault. Check and replace damaged component/s at its vertical scan output circuit section. If you wish to get some details, check the site linked here. http://electronicshelponline.blogspot.com/ Pull up older posts. Check the site in 'Mosaic' view. It will make search easy.

Sylvania 6427TE... | Answered on Jan 07, 2014 | 27 views


Check the Main B+ voltage. If it is more than normal, this kind of fault can occur. To get some details, http://electronicshelponline.blogspot.com/ Pull up older posts.

Sylvania 6427TE... | Answered on Dec 10, 2013 | 30 views


045,049,041. Check these codes. If you wish to get more details, check the sites linked here. Setup code list, and setup procedure to many popular brand remote controls are given. http://electrohelponline.blogspot.com/ http://remotesearch.blogspot.com/ Selecting the view option, either to Mosaic / Time slide, can be selected by the drop-down list, at the top left of the display window, will make surf easy.

Sylvania 6427TE... | Answered on Oct 23, 2013 | 25 views


I had one that did the same thing and it turned out to be the picture tube.

Sylvania 6427TE... | Answered on Oct 22, 2013 | 27 views


Yes, it is not possible to exit into any service mode without any remote. I've been almost 25 service mode entering and exiting on any brands since 2004 thus i said impossible to exit without a remote. Thanks for using Fixya.

Sylvania 6427TE... | Answered on Oct 15, 2013 | 144 views


What help do you want?

Sylvania 6427TE... | Answered on Sep 23, 2013 | 15 views


possibly on you control panel. Were the password is unknown thus need to reset your system.

Sylvania 6427TE... | Answered on Sep 23, 2013 | 36 views


one of the energy cables is damaged, so tv 'safety protcol' turns on, not to burn shuts off.
go to service

Sylvania 6427TE... | Answered on Apr 20, 2013 | 183 views


If you wish to get more details, check this site. Pull up older posts there. Check the site with patience, as it has over 2200 posts now. All are related to electronic equipment repair help.

Sylvania 6427TE... | Answered on Apr 06, 2013 | 21 views


You must have remote control to select inputs.

Sylvania 6427TE... | Answered on Mar 25, 2013 | 24 views

Not finding what you are looking for?
Sylvania 6427TE 27" TV Logo

178 questions posted

Ask a Question

Usually answered in minutes!

Top Sylvania Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76140 Answers

matt martin
matt martin

Level 3 Expert

1257 Answers

Cindy Wells

Level 3 Expert

6026 Answers

Are you a Sylvania Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...