Sylvania 6719DC 19 in. TV/VCR/DVD Combo - Page 2 - Answered Questions & Fixed issues
Trying to get my directv remote to control this TV
slide the mode switch to tv, hold down mute and select until the light blinks enter "9-9-1-------1" when the lights finish blinking start pushing push the channel up button. this is a code search. It will transmit every code it knows one at a time. when the tv turns off you've found a code that works. turn it back on, try the volume and see if it works correctly. when finished press select.
most tv/dvd and/or vcr combos won't work with tv codes.
Directv has posted many new codes on their website for combo tv's Go to [ www.directv.com/remote ]to look up the latest codes
read the programming section for the remote as there are many customizable features on the remote that most people aren't aware of.
good luck
Put a DVD in Colby DVD-537 DVD player but wont't
I work for COBY tech support. Our number is 800-727-3592.
Unfortunately, your player will have to be replaced. The problem you're having cannot be fixed with troubleshooting of any kind. The player has a 90 day warranty from the date of purchase. We can also replace it out of warranty for a flat fee of $31. Please call the above number if you wish to take advantage of either option.
I hope I've provided
you useful assistance and that this information allows you to make an
informed decision as to how to proceed from here. Please be sure to
vote on my response. I hope I've earned a good rating from you
today.
Please let me know if I can be of further assistance.
Sylvania 6719DC + E Circuit 6 in 1 Remote Control
I bought this at a Dollar Store and it works great.
1) Turn TV on. Do not worry about what channel.
2) Press and release TV1 button on remote. Depending on what unit your trying to sync.
3) Press and hold SET and ON buttons together for about three seconds until light begins to flash.
4) Release buttons, light will continue to flash and search.
5) Be prepared to immediatly press SET button when Television Set turns off. Be patient this may take a few minutes.
I wasn't able to find information on this. Just got lucky. Hope this information helps. Good Luck!
Need help
i have an Sylvania Mod# 6720FDF Ser# V29522723 TV/VCR/DVD combo
No sound No picture i need an diagram, to find out what is wrong with my power supply.
need help my send me an e-mail if you have an solution i appreciate it.
[email protected]
Losing color
You can try a hard reset: Unplug TV from AC mains and remove all cables from TV. Wait about 30 minutes and replug to AC power and redo the cabling. Switch on the TV and see if it works..And check if your facing when playing DVD ...
HOW TO DISARM THE CARRIAGE
a vcr carriage has at least one or maybe two little plugs going to it from the main circuit board, unplug whatever lines that are going to it. don't cut any wires.
Not receiving IR Commands from remote.
replace the IR sensor...I don't have a part number for it..but I have
seen IR sensors grow either weak..or fail totally..also you'll want to
verify that the remote is working...you can buy an infrared detector
strip from radio shack for a couple bucks...all you do is push power on
the remote continuously..and hold the detector strip up to the front of
the remote..if you see a red flashing on the strip..the remote is
transmitting..if not..the remote has low battery..or has taken a dirt
nap.......
TV wont stay on
The vcr carriage was probably damaged ( broken gear or carriage gear, etc ), As for repairing it, it may not be worth it and chances are, you won't find a new carriage for the unit. I have, in the past, disarmed the VCR unit and at least the customer could watch the TV. Thats not possible in every set, but it seems to work in the majority of them. Good Luck
Ed
NC Electronic
Mills, Wyoming
Sylvania 6720FDE combo tv/dvd/video
The codes for a combo set are found in the DVD settings or the VCR settings. Try the rca codes for DVD or Vcr and it should work. Although you may find that not all the functions will work properly ( ie: fast forward, open door, etc ). Good Luck
Ed
NC Electronic
Mills, Wyoming
Gaming
its you video cord or your actual jack that connects to the tv, try a diff one. make sure its plugged in completly and in the right area.
I have an old Sylvania tv and it won't turn on
Here are some troubleshooting tips to try. However, as it is an older set, if these tips fail, the cost of a repair at a shop might exceed the value of the TV. In short, a new TV may be in the works. Cross your fingers. One of these tips may work.
Let's troubleshoot the issue and try to get it working:
If you are using a remote, check the batteries in it. If you are using several remotes with it, try the alternative remote. Sometimes there is a glitch affecting the remote for a Roku where it won't turn on the TV other than a powered black screen and you have to use the other remote to turn it off and back on and then the Roku screen pops up. I have not sorted out why.
Check Power Cord and Connections:
First, ensure that the power cord is securely plugged into both the TV and the electrical outlet.
If you suspect a faulty power cord, consider trying a different one.
Reset the TV:
While most Sylvania TVs don't have a dedicated reset button, you can perform a manual reset:
Unplug the TV's AC adapter from the electrical socket.
Press and hold the Power button on the TV for 20 seconds.
Plug the AC adapter back in and turn on the TV.
Check Audio/Video Cables:
Inspect the audio/video cables connecting your TV to the satellite or cable receiver.
Ensure that the color-coded prongs match their respective connecting points.
Correct any mismatches (e.g., white cable into a red port) by reorganizing the prongs.
Inspect Coaxial Cable:
Look for the coaxial cable on the rear side of the receiver, attached to the port labeled as ANT IN.
Confirm that the connection is firm; a loose coaxial connection can cause display issues.
Tighten the cable by pinching the silver band on the end and rotating it clockwise until secure.
Check for Interference:
If distortion continues on the TV screen, consider nearby interference.
Power-hungry appliances can cause electronic interference, affecting display quality.
Visit a Repair Shop:
If the above steps don't resolve the issue, you may need professional help.
Some technical faults, such as a blown fuse or faulty capacitor, require expertise in dismantling and soldering.
If uncomfortable with such tasks, consider visiting a repair shop
2/3/2024 6:17:20 AM •
Sylvania...
•
Answered
on Feb 03, 2024
•
23 views
I have a 37in limited edition Sylvania TV I have tried every code on my Phillips universal remote none work. Is there a specific code.
- Auto Code Search:
- Turn on your Sylvania TV.
- Press and hold the "Code Search" button on your Philips remote until the indicator light stays on.
- Press the "TV" button on the remote to set it to control the TV.
- Press the "Power" button repeatedly until the TV turns off.
- Press the "OK" or "Enter" button to save the code.
- Manual Code Entry:
- Find the code for your Sylvania TV in the Philips remote control manual. If you don't have the manual, you may be able to find it on the Philips website.
- Turn on your Sylvania TV.
- Press and hold the "Code Search" button on the remote until the indicator light stays on.
- Enter the code using the number buttons on the remote.
- Test if the remote now controls your TV. If not, repeat the process with a different code.
- Try Common Codes:
- Some common Sylvania TV remote codes for Philips remotes are 0810, 1684, 1886, 2183, 1081, 1172, 1196, and 2049. Try entering these codes manually.
1/9/2024 10:32:14 PM •
Sylvania...
•
Answered
on Jan 09, 2024
•
32 views
Why no tv picture on my Sylvania #ssc092 ac/dc tv/vcr combo?
it is a very simple TV, is TV connected to cable? Here is link to manual copy and past download and save for future reference. It is very old and has CRT not LCD.
https://www.manualslib.com/manual/776815/Sylvania-Sylvania-Ssc092.html#manual
10/20/2023 4:15:16 PM •
Sylvania...
•
Answered
on Oct 20, 2023
•
39 views
Not finding what you are looking for?