Sylvania 6719DC 19 in. TV/VCR/DVD Combo - Answered Questions & Fixed issues


Failing power supply

Sylvania 6719DC... | Answered on Aug 24, 2018 | 617 views


Cable and TV remotes often are functionally incompatible.

Sylvania 6719DC... | Answered on Sep 27, 2017 | 271 views


Failing power supply

Sylvania 6719DC... | Answered on Oct 18, 2016 | 407 views


check that the tv /receiver is not in favourites mode, there may be an option to sort channels in the channel list...try there.
If you cannot fine the corrective try resetting to default and retuning from scratch.
There may be an option fo isolate the control functionality so that others cannot mess about with the settings, it may need a passcode to be set, try that after correcting the issue

Sylvania 6719DC... | Answered on Aug 01, 2015 | 337 views


You may want to check that you are not listening to the secondary audio program (SAP). I am not sure how to check this on your TV, but I would start by poking around the menu of the TV in the audio section if there is one.

Sylvania 6719DC... | Answered on Oct 14, 2013 | 48 views


287,281,284,286,222,000 are the codes to check. If you wish to get more details, check this site. Pull up older posts there. Setup code list and setup proceedings to many popular brand remote controls are given. Two digit, three digit, four digit and five digit setup code list to different models remote controls are given. If you search the site in Timeslide option, which can be selected from the drop down list at the top left of the display window, it will be easy to locate the related post. You can also do a search by type in the brand name and model number to your device into its search box at the top right of display window.

Sylvania 6719DC... | Answered on Apr 29, 2013 | 24 views


SAP is an alternate audio program usually seen in markets with different languages. The most common is for a Spanish broadcast of an English program. It is also used to provide audio descriptions of programming for the blind. There should be a menu option under Audio to turn this on and off.

Dan

Sylvania 6719DC... | Answered on Oct 13, 2012 | 718 views


with the original remote via the set's main menu.

Sylvania 6719DC... | Answered on Jul 17, 2012 | 43 views


If a 19 inch as indicated here maybe time to buy another set

Sylvania 6719DC... | Answered on Jun 12, 2012 | 79 views


Someone needs to look inside to see if something got inside and is stopping the mechanism from working---I have even seen a few which someone had managed to get 2 discs in at same time.

If the mechanism is damaged it may not be worth repair as the DVD portion (if even available) costs too much.

Sylvania 6719DC... | Answered on Apr 01, 2012 | 336 views


Hi my name is Mike Houston of DISH Network, with the TVswitching between channel 3 and AUX there are some things to check to resolvethe issue. You will want to make sure all connections are hand tight from thereceiver to the TV and to the wall. After all connections are hand tight checkto see if the channels are still going back and fourth. If it still persiststry changing the remote address, I will send a link that better explains thissetup; http://www.dishnetwork.com/SupportSection/remote-setup

Sylvania 6719DC... | Answered on Nov 29, 2011 | 209 views


HI,
To auto preset channels do the following procedure.
1. Press the SETUP button on the remote.
2. Using UP/DOWN arrow Select CHANNEL SET UP and press the RIGHT arrow to enter to channel preset
3. Using UP/DOWN arrow select AUTO PRESET and press the RIGHT arrow to start the auto scan.

Wait till The tuner scans and memorizes all the active channels in your area.

ok

Sylvania 6719DC... | Answered on Sep 10, 2011 | 570 views


press button and face it to any mobile camera like nokia 6680 or htc touch.if light come out then its not your remote problem its you tv infrared sensor problem.

Sylvania 6719DC... | Answered on Jun 12, 2011 | 167 views


que I.c de sonido tiene, se probaron las bocinas

Sylvania 6719DC... | Answered on Jun 09, 2011 | 72 views


Possibly have a tape drive motor issue it powers down to save itself .Thats the dickens with those combo sets they are hard to look at ,you have to take it half apart just to see whats going on

Sylvania 6719DC... | Answered on Apr 24, 2011 | 1,065 views


sounds you have a jam a tape or forrien object in it use a flasslight to look through the door to see if there is any then you have to take it appart to remove it but i suggest taking it to a repair man...

Sylvania 6719DC... | Answered on Apr 14, 2011 | 104 views


S.A.P. Means Secondary Audio Program.


SAP, Mono, Stereo, Etc. You should be able to switch this from your remote. Even universal remotes should have this button to adjust sounds. Otherwise you need to go into the TV menu (not the remote) and change it from there. The only way you can change it on those channels is to switch manually. Happens a lot on these older TVs. No worries. Very common.

On many sets, the audio channel can be switched by remote control or through a SAP switch located around the tuning panel or "on screen programming." Usually, there is a setting labeled SAP, AUDIO SELECT, B-AUDIO, MTS, or MENU. By changing the setting, you should be able to select SAP. Not all TV sets are alike, so you might want to check your instruction manual for all the details.

Sylvania 6719DC... | Answered on Mar 10, 2011 | 603 views


Hello,

The issue you describe is consistent with a power supply board issue. This is the board where the AC goes to.

I do not think it needs replacement, rather some defective capacitors are causing this issue.
Open unit up and take a look at the power supply board.You will probably see one or more electrolytic filter capacitors that are bulged up in the top-not perfectly flat like the others.

The value of these capacitors will be different, most likely they will be somewhere around-820 to 2200uF/25 V( or /10V sometimes)

You can replace them with same values but I would recommend the voltage rating to be higher(like 35V for an original 25V) for reliability purposes.

What happens is,these bulged top capacitors will cause a low and unfiltered DC voltage=main board will malfunction(the relay will keep clicking until the caps are holding enough charge to bring the voltage up over a threshold point).

You can buy these capacitors at any Fry's or Radioshack store or you can order them online at vendors like "mcmelectronics.com"(look for electrolytic capacitors).
After replacing these capacitor(capacitors) most likely the normal operation will be restored.

Note: There may be also some other causes for this symptom ,like a defective T con board ,or main board,but the bulged top capacitors are the most common cause for this issue.

If you don't know about TV repairers, take the TV to the nearest repairman to fix the fault for you. Also, note that TV stores a lot of current, so wait a while before opening the TV back cover.

I hope this helps.

Good luck.

Sylvania 6719DC... | Answered on Dec 04, 2010 | 211 views

Not finding what you are looking for?
Sylvania 6719DC 19 in. TV/VCR/DVD Combo Logo

63 questions posted

Ask a Question

Usually answered in minutes!

Top Sylvania Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76140 Answers

matt martin
matt martin

Level 3 Expert

1257 Answers

Cindy Wells

Level 3 Expert

6032 Answers

Are you a Sylvania Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...