20 Most Recent Uniden BCT8 Base Scanner - Page 8 Questions & Answers

Reset power button on power strip first turn off then on.If that don't work check and see if it is a switched outlet turn wall switches on in area.check and make sure cord is secured to scanner. Plug a lamp that is on in the strip this will help you when you are trying to turn switches on by yourself you can see it light up.

Uniden has flat rate repair costs posted on their site

If the scanner is stuck on a channel you do not want press the L/O button.

Sounds like it's built-in internal battery is failing. Without having a service manual in front of me, suggest you open it up and look for a "button" battery (like a big watch battery) some where on it's circuit board. Hope this is helpful Regards John

Sorry we do not have this kind of info here.

do online search or electronics store

https://www.racingelectronics.com/v/files/MANUAL_Uniden_SC150.pdf here is link to manual you need.

Scanner Reset to initialize the scanner's memory, turn off the scanner. Then press 2, 9, and Hold while turning it on (It helps if you can lay it flat). The scanner will give you the option 'Restore Preprogram List? "Yes"=E/No="."', if you press 'E/Yes', the scanner reloads the preprogrammed systems. Important! This deletes all programmed data. Easier to Read BC346XT Scanner Manual here is link to manual