20 Most Recent
E-Machines eMachines Refurbished EMA SYSTEM BOARD MODEL T2984 eMachines (102257) PC Desktop - Page 6 Questions & Answers
Problem with lisenting audio on my laptop
Hi there,
The connections in your speakers are waring, this is due to opening and closing the laptop as the wires go through the screen.
You can take it to a repair shop and they will repair it, or just vist the compaq website and try updating the sound drivers.
hope this helps
alex
No sound audio driver installed anymore?
If you can't find the audio for that board, purchase an inexpensive sound card (used-$5) and it is easier than pulling your hair out.
If you provide more information on the particular board # and nomenclature it may be possible to find the exact drivers you require. Like I said, found an old sound blaster...
Hope this does the trick for you, good luck,
please leave a rating, thank you kindly
Computer starts to boot up, but then nothing g but
Please follow the following options :
1. Your operating system is corrupt. Now, you need to reinstall it or repair it.
2. Try to remove hard disk and then try. After that attach your hard disk but please check all the cable condition. If cable condition is bad then buy new one else attach your hard disk.
3. Clean your RAM by pencil eraser at the end. And also clean the RAM slot.
I have a clientpro MPC and running windows xp 2000
hi there,
have you ever check the driver of your sound card if there a sound card device on you system. try to check this on control panelc click system, then click harware,on hardware click device maneger,check your soud device click properties
if was configured,if no driver update your driver on website,you can down load sound driver on website just the brand on internet and it will find it for you.after you get driver install it,test your sound device on control panel again click sound device check voice.have a nice day and don't forget to rate me,thank's
Emachine 180 (bought 2004)
I have this type of computer (just sitting around , not for my main computer) and I had a smilar problem. I took it to a guy I know (who owns a computer repiar shop) an he said the motherboards on this model go haywire about four years after initial power-up. On mine, it caused the power supply to blow-up (literally) and blew out most components. (Floppy drive, Sound card, USB ports, Keyboar/mouse plugs)
I really don't know if What he said is true, but I replaced the power supply, and now it works fine.
Sound problem.
SAMMY44,I have the same computer,and the same problem...we need to find the right AC-97 codecs for this type of computer...I found this out by typing the motherboard number on google..Its a real pain in the but to find the codecs for the onboard sound card...your best bet is to buy a pci slotted sound card,or other wise,,you can be like me,,and try try to know your computer on the inside.and try to find the codecs yourself that way if you ever run into this problem again,,you'll know what to do!!!
Need wiring diagram for eMachine 20030812 motherboard!!!
You should be able to see the words/letters that go with the jumpers on the motherboard itself. look around the jumper settings area for power, pwr etc. and match them up with your jumpers which should have what the go to on them.
Need Sound driver
you can get the drivers here:
http://www.nodevice.com/driver/815EP_Pro/get38348.html , they come in the motherboard packaged drivers, you may be able to install them individually or you may have to install the package.
scroll to the bottom of the page , put in the "letters" they are asking for . Download the driver to your desktop so you can find it. exit the browser and dbl click on the download on your desktop to start the install.
My monitor will not come out of stand by, and I
standby can sometimes not work because of hardware incompatibility. easy way is not to use it, or use hibernation instead.
if you insist using it, you can try to updae the bios or reset the bios or unplug all usb devices and pci cards and try to see what cause the error.
T2984 won't power up
I've re[lace alot of bad eMacines power supplies. Nearly all of them took out the video chip on the mother baord, rendering it useless.
Dead motherboard on emachines t2984
I hope that you took it back to them.
Have them check the power supply, too. Besides, a bad power switch and connections that would be the only thing that would be keep it from starting.
Not finding what you are looking for?