20 Most Recent Sanyo DWM-390 DVD Player - Page 8 Questions & Answers

The TCON board is usually not the problem. It is the power supply or the LED or backlights.

2215, 2205, 2495, 0095, 0405

https://www.amazon.com/Soundbar-FWSB426F-FWSB426FA-FWSB415E-WIR113001-FA03/dp/B07DC3QJWF

To change the Region code on your player, open Control Panel - System - Hardware - Device manager, and click on DVD/CD ROM drives, then right click on the DVD drive and click Properties then click on DVD Region.
You can enter a new region and it also shows you how many changes have been made.
NOTE you can make only 4 changes and the player will lock permanently on the 4th change.
If you want to play DVD from any region you maybe able to upgrade the firmware to make it region free BUT if you make a mistake or installed the wrong firmware the the player will be a piece of junk.
The best solution to make the player region free is to install a piece of software that allows you to play DVDs from any region. There are several available on the Internet but my favourite is DVD-Region Free from ;-
www.dvdidle.com/dvd-region-free.htm

Without its' original remote control; you can't unlock it. If you wish to buy its original remote control, contact the authorized service centre, or authorized dealer of your device brand. They can either give you a genuine remote control to your device, or can direct you, from where can you purchase a compactable one. To select a proper universal remote control, you should know about the number of digits to its set-up codes. There are 3 digit, 4 digit, 5 digit, 2 digit and even single digit codes, to some brand devices. After confirming this, check the sites linked here. Both the sites have set-up code list and set-up procedure to many popular brand remote controls. Check which brand remote control has set-up code/s to your device brand, and buy that one according to availability? Brand name of the remote control isn't a matter, but it should have set-up codes in its code list, to the device brand you have. Please note: Every new universal remote control will have set-up code list, and set-up procedure along with its pack. Never accept a remote control, that hasn't both of this. For more details about the set-up codes, visit the site https://electrohelponline.blogspot.com/ https://remotesearch.blogspot.com/ https://elektrotricks.blogspot.com/ https://homenol.blogspot.com/ Type in the brand name of your device in the search box, and hit enter to get gathered related posts. See the website either in Webview with a mobile, or by a desktop computer. Mobile view has no search box.

Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. One among it has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily. http://remotesearch.blogspot.com/ https://elektrotricks.blogspot.com/ http://electronicshelponline.blogspot.com/ http://electrohelponline.blogspot.com/ Type in the brand name of your device in the search box, and hit enter to get gathered related posts. See the website either in Webview with a mobile, or by a desktop computer. Mobile view has no search box.

http://www.devicemanuals.com/support/sanyo-em-d9950-pdf-manual-369295.html https://www.manualslib.com/manual/148723/Sanyo-Lcd-19e30a.html#product-LCD-42E30FA

Instruction: http://www.manuals.group/results.php?search=SANYO%20DCW%204800%20UM

happened with my tv too then found their email and mailed them. was researching on https://nect.co/

The TV will need a power supply, are there any power lights on to indicate it could be on standby?

Most bluray players have 2 eyes....one for dvds and cds and one for blurays. If cleaning by hand dont work reader could have gone bad.

download: https://www.diagram.com.ua/english/catalog/eng-w-tv/s/index.php?page=76 https://www.google.com/search?source=univ&tbm=isch&q=schematic+diagram+of+sanyo+model+ST21YS22&hl=en&sa=X&ved=2ahUKEwiEgenLvZ_pAhUCxoUKHTHEA08QsAR6BAgKEAE&biw=1326&bih=627

Probly need new set..cheapr then fixn..wal* gut sale on last yr models for less then 200$

What is the number for that transistor? Are you sure it is not a FET? Do you have the schematic?

Maybe this video is helpful https://www.youtube.com/watch?v=iq7g2IT_nAk

Reset Sanyo Tv without remote Keep pressing the {MUTE} button until the TV powers on with the Service Menu displayed. Use the {CH+} {CH-} buttons to select menus. Use the {VOL+} {VOL -} buttons to change settings. Some menus might have sub-addresses. https://hardmasterreset.com/how-to-reset-sanyo-tv/

Turning On the Soundbar

1. Make sure the Subwoofer is connected to an AC outlet.
2. Press and Hold the CONNECT button on the Rear of the Subwoofer until the Red LED starts blinking rapidly.
3. Using the Remote Control, switch the Soundbar Input to AUX by pressing the AUX button.
4. Press and Hold the.

https://www.manualslib.com/manual/1137752/Sanyo-Fwsb426f.html?page=11 https://forums.tomsguide.com/threads/how-do-i-get-my-sanyo-sound-bar-to-power-on-without-the-remote.193855/

https://www.ifixit.com/Answers/View/15651/powers+up+no+picture+or+sound https://www.ifixit.com/Answers/View/399115/Green+power+light+stuck+on,+no+picture+or+sound+on+TV.

Sanyo 2010 DP50749 I can’t seem to get my menu button to work I’ve tried everything almost please help

https://www.ifixit.com/Answers/View/396200/tv+flips+through+all+the+channels